Photoelectric sensors FSE 200D2Y00 Through beam fiber optics 4 x ø 0,25 L 15 ø 1 ø 1,5 dimension drawing 15 L general data photo particular characteristics standard type through beam sensor actual range Sb 180 mm response time / release time 0,05 ... 5 ms type of head (fiber optic cable) cylindrical smooth (axial) width / diameter (head) 1,5 mm height / length (head) 15 mm material (head) stainless steel bending radius 4 mm cable jacket diameter 1 mm material cable jacket PE material (fiber optic cable) plastic length (fiber optic cable) 2000 mm operating temperature -30 ... +70 °C Sensing distance/response time: For the definitive sensing distance/response time please see table below “fitting fiber optic sensors”. Highly flexible, extremely pliable fiber with a min. bending radius. Suitable for drag chains. fitting fiber optic sensors actual range Sb (0,05 ms) actual range Sb (0,25 ms) actual range Sb (1 ms) actual range Sb (5 ms) FVDK 67 (standard version) 30 mm (HS) - 120 mm (nL) 180 mm (HP) FVDK 67 (2 adjustable outputs) 30 mm (HS) - 120 mm (nL) 180 mm (HP) FVDK 67 (master/slave) 30 mm (HS) - 120 mm (nL) 180 mm (HP) FVDK 66 (standard version) - 38 mm (FT) 60 mm (nL) - FVDK 66 (master/slave) - 38 mm (FT) 60 mm (nL) - FVDK 22 - - 45 mm (nL) - FVDK 12 - - 45 mm (nL) - FVDK 12 (fast version) 42 mm (HS) - - - FVDK 10 - - 20 mm (nL) - FWDK 84 (analog output) - - 20 mm (nL) - operating modes HS High Speed FT fast nL Standard HP High Sensitivity www.baumer.com 11/6/2015