PJ Surface Mount Crystals Environmental Electrical Specifications 5.5 x 11.7 x 2.2 mm PARAMETERS Frequency Range* Tolerance @ +25°C Stability Aging Shunt Capacitance Load Capacitance Standard Operating Conditions Equivalent Series Resistance (ESR), Max. Fundamental (AT-cut) 3.579 to 3.999 MHz 4.000 to 7.999 MHz 8.000 to 9.999 MHz 10.000 to 19.999 MHz 20.000 to 30.000 MHz Drive Level VALUE 3.579545 to 30.000 MHz See Table See Table ±5 ppm/yr. Max. 7 pF Max. 18 pF Std. See Table 200 ȍ 150 ȍ 100 ȍ 80 ȍ 50 ȍ 100 µW Max., 50 µW Typ., 10 µW Min. Mechanical Shock MIL-STD-202, Method 213, C Vibration MIL-STD-202, Method 201 & 204 Thermal Cycle MIL-STD-883, Method 1010, B Max Soldering Conditions See solder profile, Figure 1 * Because this product is based on AT-strip technology, not all frequencies in the range stated are available. Contact the factory for availability of specific frequencies. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Revision: 1-2-08 MtronPTI Lead Free Solder Profile MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.