Photoelectric sensors O300.RR-GD1Z.72CU O300.RR-11120118 Retro-reflective sensors dimension drawing 14 19 2,8 1,5 32,3 24,8 3 52,9 LED 3,2 17,8 12,9 2,9 9,7 23 general data photo type retro-reflective sensor light source pulsed red LED actual range Sb 4 m nominal range Sn 5 m polarization filter yes light indicator LED yellow power on indication LED green sensitivity adjustment no wave length 630 nm suppression of reciprocal influence yes alignment optical axis < 2° electrical data connection diagram response time / release time < 0,49 ms voltage supply range +Vs 10 ... 30 VDC current consumption max. (no load) 30 mA BN (1) current consumption typ. 30 mA WH (2) voltage drop Vd < 3 VDC output function dark operate output circuit push-pull output current < 100 mA short circuit protection yes reverse polarity protection yes Push Pull Z BK (4) BU (3) Z +VS n.c. output 0V mechanical data width / diameter 12,9 mm height / length 32,3 mm depth 23 mm type rectangular housing material plastic (ASA, PMMA) front (optics) PMMA connection types cable 4 pin, 2 m ambient conditions operating temperature -25 ... +60 °C protection class IP 67 O300.RR-GD1Z.72CU www.baumer.com 24/4/2015