Diaphragm seal 1005 for homogenizer Main Features Wetted parts stainless steel 1.4571 (316Ti) Fixing flange for homogenizers Integrated damping element Applications Food & Beverage Description They avoid that the medium flows into the instrument, where deposits could be built and generate wrong measurements or pollution of the process. The design is made to resist the high pressure and strong pulsations in homogenizer systems. An internal dampenening element protects the measuring instrument. Process connection Block flange for homogenizer Pressure ranges Body material 0 ... 100 bar to 0 ... 600 bar (see table below) Stainless Steel 1.4571 (316Ti) Diaphragm Stainless Steel 1.4571 (316Ti) Flange Stainless Steel 1.4301 (304) Working temperature -60…200 °C (depending on the filling fluid) Filling fluids Chemical seal can be mounted to mechanical pressure gauges, switches or transmitters directly or with a cooling element. The filling fluid of the measuring system has to be choosen compatible to the application. LRS1: Vaseline (-15 ... +150 °C) LRS10: Vaseline (-20 ... +225 °C) Other filling fluids on request Ordering code / Minimum pressure ranges Pressure gauges Instrumentconnection NS 50-63 mm NS 100-150-160 mm 1005 M 12x1 0 ... 100 bar 0 ... 100 bar Transmitters P max. 0 ... 100 bar 600 bar 2015-02-10 Code Design and specifications subject to change without notice This homogenizer diaphragm seals are used to protect pressure gauges from high temperatures, aggressive or corrosive fluids. www.baumer.com Data sheet A43. D1.204 Page 1 / 2 Diaphragm seal 1005 for homogenizer Dimensions M 12x1 Flange width 50-2 62 Ø 18 30-2 ^ 14,6 7 ^ Ø 23,9 -0,2 Ø 33,3 60 95 Ordering example MEX 5 – D X 1 . B31 / 1005 _ 9007 _ 0080 _ LRS1 Design and specifications subject to change without notice Homogenizer diaphragm seal Option: Adjustment at specific fluid temperature Adjustment temperature: 80 °C 2015-02-10 Filling fluid LRS1: Vaseline (-15 ... +150 °C) www.baumer.com Data sheet A43. D1.204 Page 2 / 2