• 1N4099 THRU 1N4135 AVAILABLE IN JANHC AND JANKC PER MIL-PRF-19500/435 • ZENER DIODE CHIPS • ALL JUNCTIONS COMPLETELY PROTECTED WITH SILICON DIOXIDE • 0.5 WATT CAPABILITY WITH PROPER HEAT SINKING • ELECTRICALLY EQUIVALENT TO 1N4099 THRU 1N4135 • COMPATIBLE WITH ALL WIRE BONDING AND DIE ATTACH TECHNIQUES, WITH THE EXCEPTION OF SOLDER REFLOW CD4099 thru CD4135 23 MILS 15 MILS MAXIMUM RATINGS 23 MILS Operating Temperatures: -65°C to +175°C Storage Temperatures: -65°C to +175°C Forward Voltage @ 200 mA: 1.5 Volts maximum CDI TYPE NUMBER NOMINAL ZENER VOLTAGE V @I Z ZT ZENER TEST CURRENT I ZT (Note 1) MAXIMUM ZENER IMPEDANCE Z ZT 15 MILS ELECTRICAL CHARACTERISTICS @ 25°C, unless otherwise speci½ed. MAXIMUM REVERSE LEAKAGE CURRENT I @V R R (Note 2) VOLTS µ A OHMS µ A VOLTS CD4099 CD4100 CD4101 6.8 7.5 8.2 250 250 250 200 200 200 10.0 10.0 1.0 5.17 5.70 6.24 CD4102 CD4103 CD4104 8.7 9.1 10 250 250 250 200 200 200 1.0 1.0 1.0 6.61 6.92 7.60 CD4105 CD4106 CD4107 11 12 13 250 250 250 200 200 200 .05 .05 .05 8.44 9.12 9.87 CD4108 CD4109 CD4110 14 15 16 250 250 250 200 100 100 .05 .05 .05 10.65 11.40 12.15 CD4111 CD4112 CD4113 17 18 19 250 250 250 100 100 150 .05 .05 .05 12.92 13.67 14.44 CD4114 CD4115 CD4116 20 22 24 250 250 250 150 150 150 .01 .01 .01 15.20 16.72 18.25 AL THICKNESS............25,000 Å Min CD4117 CD4118 CD4119 25 27 28 250 250 250 150 150 200 .01 .01 .01 19.00 20.46 21.28 GOLD THICKNESS... .....4,000 Å Min CD4120 CD4121 CD4122 30 33 36 250 250 250 200 200 200 .01 .01 .01 22.80 25.08 27.38 CD4123 CD4124 CD4125 39 43 47 250 250 250 200 250 250 .01 .01 .01 29.65 32.56 35.75 CD4126 CD4127 CD4128 51 56 60 250 250 250 300 300 400 .01 .01 .01 38.76 42.60 45.60 CD4129 CD4130 CD4131 62 68 75 250 250 250 500 700 700 .01 .01 .01 47.10 51.68 57.00 CD4132 CD4133 CD4134 CD4135 82 87 91 100 250 250 250 250 800 1000 1200 1500 .01 .01 .01 .01 62.32 66.12 69.16 76.00 Backside is Cathode FIGURE 1 DESIGN DATA METALLIZATION: Top: (Anode)........................Al Back:(Cathode)...................Au CHIP THICKNESS............ ......10 Mils CIRCUIT LAYOUT DATA: For Zener operation, cathode must be operated positive with respect to anode. TOLERANCES: ALL Dimensions + 2 mils NOTE 1 Zener voltage range equals nominal Zener voltage + 5% for no suffix types. Zener voltage is read using a pulse measurement, 10 milliseconds maximum. "C" suffix = + 2% and "D" suffix = + 1%. NOTE 2 Zener impedance is derived by superimposing on lZT A 60Hz rms a.c. current equal to 10% of lZT. 6 LAKE STREET, LAWRENCE, PHONE (978) 620-2600 WEBSITE: http://www.microsemi.com M A S S A C H U S E T T S 01841 FAX (978) 689-0803 189 CD4099 CD4135 thru 1000 500 400 300 3. 3 VO LT 27 VO LT 1 100 5. LT VO ZENER IMPEDANCE ZZT (OHMS) 200 50 40 30 11 20 VO LT 10 6.2 VO LT 5 4 3 2 1 .1 .2 .3 .4 .5 1 2 5 10 20 OPERATING CURRENT lZT (mA) 30 40 50 100 FIGURE 3 ZENER IMPEDANCE VS. OPERATING CURRENT 190