Id.-Nr. Date Code 13.45 -0.1 3 -0.1 15.4 XXXXXXX ERNI 114153 2 2 24 x 2 = 48 6x2= 12 EE Zone fuer durchkontaktierte Loecher ø0.6 ±0.05 compliant zone for thru hole ø 0.6±0.05 Level 3 Ebene Ebene - Level 2 Ebene - Level 1 25 1 11.2 9.7 8.2 +0.2 +0.2 +0.2 4.5 ±0.3 z 3.7 ±0.3 a b c A d P2 e B C f D 1max 1max E P1 F G U 1 50 max H J Bezugsebene Tiefe 13 ±0.3 Datum plane depth Bestueckungsplan - contact layout K 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 R 3 1 z R 2 b c (Component mounting side ) 24 x 2 = 0.1 alle Löcher (48 ) 2 (12) a 6x2= z c b 14.5 ±0.2 6.8 ±0.1 16 ±0.2 8.3 ±0.1 1) ø 0,6 ±0,05 Durchmesser des metallisierten Loches ø 0,6 ±0,05 Diameter of finished plated-through hole ø 0,7 ±0,02 Bohrungsdurchmesser des Loches ø 0,7 ±0,02 Diameter of drilled hole Schichtaufbau im metallisierten Loch siehe Zeichnung 114406 Metal plating of plated-through hole see drawing 114406 Fehlende Masse und Angaben nach IEC 61076-4-101 e Missing information and dimensions per IEC 61076-4-101 1 11 Information: Tolerances Scale 2:1 All Dimensions in mm Consider protection memo from DIN 34 2 15 T 5.3 ±0.1 d f 25 S 13 ±0.2 1) all holes Q R 1 f Board hole pattern P R d e (Bestueckungsseite) M N a Lochbild fuer Leiterplatte L All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. a Index 16.05.2001 Date Subject to modification without prior notice. Drawing will not be updated. Designation ERmet Messerleiste AB ERmet Male Wide Type AB Elektroapparate GmbH D-73099 ADELBERG M:00020064.SZN 114153 I