Sensor Toolbox DEMOMMA8491 DEMOMMA8491 Quick Start Guide The MMA8491Q Xtrinsic accelerometer 3-axis sensor demo. 1 Position Rotate and hold the board in the desired position by referencing the X, Y and Z arrows on the demo board label. 2 Enable Press and hold the button to view the triggered LED. Axis perpendicular to the ground will light the corresponding LED. Xtrinsic 3 Repeat Release the button, repeat steps 1 and 2. Sensor Toolbox Quick Start Guide for i.MX50 DEMOMMA8491 LED1 Lights When MMA8491Q Sensor Detects Tilt Threshold on Z Axis 3.3 V Battery Button to Power the MMA8491Q Sensor to Trigger a New Sample MMA8491Q Accelerometer 3-Axis Sensor LED2 Lights When MMA8491Q Sensor Detects Tilt Threshold on Y Axis LED3 Lights When MMA8491Q Sensor Detects Tilt Threshold on X Axis Breakout Board Containing the MMA8491Q 3-Axis Accelerometer Sample Learn more at freescale.com/MMA8491Q Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. Xtrinisic is a trademark of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © 2012 Freescale Semiconductor, Inc. Doc Number: DEMOMMA8491QSG REV 0