K1100BA Series 5V Crystal Clock Oscillators K1100BA, K1150BA, K1125BA, K1110BA Series 14 pin DIP, 5.0 Volt, Clock Oscillator K1100BA Series ��� 4-pin Package, Compatible with 14-pin DIL � �� �� 1.0MHz to 70MHz Frequency Range THIS PRODUCT IS NOT RECOMMENDED5V FOR NEW DESIGNS. ���� ��� � � � Crystal Clock Oscillators �� � HCMOS Circuit, TTL/CMOS Compatible ��� PLEASE REFER TO THE MHO+ PRODUCT SERIES. �� � �� � Tight Symmetry �� 4-pin Package, Compatible with(45/55%) 14-pin DILAvailable ���������������������� �� � � � ��� Tri-State OptionRange Available �� 1.0MHz to 70MHz Frequency ��� ����� ��� ��� ��� �� �� � � HCMOS Circuit, TTL/CMOS Compatible � ±100ppm Stability Standard �� �� �� Tight Symmetry (45/55%) Available ��� � � �� Tighter Stabilities Available �� ������������������ � ��� Tri-State Option Available � ����� ±10ppm Stability:- K1110BA � ±100ppm Stability Standard ±25ppm Stability:- K1125BA Tighter Stabilities Available ±50ppm Stability:- K1150BA ����� ±10ppm Stability:- K1110BA ±25ppm Stability:- K1125BA ±50ppm Stability:- K1150BA ����� E L E C T R I C A L S P E C I F I C AT I O N S MODEL Frequency Range (MHz) MODEL Frequency Stability (ppm) E L E C T RK1100BA I C A L S P E C I FK1150BA I C AT I O N S K1150BA K1100BA Frequency Range (MHz) 0°C to 70°C 0°C to 70°C -40°C to 85°C -40°C to 85°C Temperature Range (°C) Storage Rating Over Temperature±25 Only ±100 ±50 ±150 ±25 ±100 ±150 ±100 NA ±10 N/A +5.0 ±10% +5.0 ±10% Supply Supply Current (mA) Current (mA) ±10 NA N/A -55°C to +125°C -55°C to +125°C Supply Voltage (V) Supply Voltage (V) Rating Over Temperature Only -40°C to +85°C -40°C to +85°C Storage K1110BA K1110BA Inclusive of calibration, temperature, voltage, load, ±50 ±100 aging shock,vibration, Temperature RangeOperating (°C) Operating K1125BA 1.0 to 70 Inclusive of calibration, temperature, voltage, load, shock,vibration, aging Frequency StabilityOverall (ppm) Overall K1125BA 1.0 to 70 <20MHz <20MHz 15 15 20 - 70 MHz 20 - 70 MHz 50 50 Output TTL Output TTL Symmetry 40/60% @ 1.4V; 45/55% Optional 40/60% @ 1.4V; 45/55% Optional Symmetry TR and TF (ns) TR and TF (ns) Fanout (TTL) Output CMOS ≤20MHz =8; > 20MHz = 6 Fanout (TTL) Output CMOS Symmetry TR Start up Time (ms) 10 40/60 @ 0.5VCC Symmetry TR and TF (ns) ≤20MHz =8; > 20MHz = 6 10 ≤20MHz =10; > 20MHz = 8 and TF (ns) 40/60 @ 0.5VCC ≤20MHz =10; > 20MHz = 8 <10 Start up Time (ms) <10 PA R T N U M B E R I N G G U I D E K11XXBACXXX - Specify Frequency PART NUMBERING PA R T N U M B E R IGUIDE NG GUIDE “Blank” = 0oC to 70oC Operating Temperature - Specify Frequency K11XXBACXXX K11XXBACXXX-R - Specify Frequency “M” = -40oC to 85oC Operating Temperature “Blank” = 0oC to 70oC Operating Temperature “-R” = RoHS Compliant “Blank” = Fixed Frequency oC to 85oC Operating Temperature “M” = -40 = Non-RoHS Compliant “E” “Blank” = Tri-State “Blank” Fixed Frequency “Blank” = 40/60% “Blank” = 0°CSymmetry to 70°C=Operating Temperature “S” “M” = 45/55 Symmetry = Tri-State = -40°C to“E” 85°C Operating Temperature “C” = CMOS Output“Blank” = 40/60% Symmetry “Blank” = Fixed Frequency Model Selection: See Above “S”Table = 45/55 Symmetry 2553 N. Edgington Street, Franklin Park, IL “E” = Tri-State “C” = CMOS Output “Blank” = 40/60% Symmetry 60131 y Phone:Model 847.451.1000 Fax: Table 847.451.7585 Selection:y See Above “S” = 45/55% Symmetry 800-888-1499 or “C” www.champtech.com = CMOS Output 2553 N. Edgington Street, Franklin Park, IL 60131 Phone: 847.451.1000 y Fax: 847.451.7585 Model Selection: SeeyTable Above 1 MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. 800-888-1499 or www.champtech.com Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 1 Revision: 03-01-07 K1100BA, K1150BA, K1125BA, K1110BA Series K1100BA Series 14 pin DIP, 5.0 Volt, Clock Oscillator THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. 5V Crystal Clock Oscillators PLEASE REFER TO THE MHO+ PRODUCT SERIES. PIN FUNCTION 1 N/C / Tri-State 2 Ground 3 Output 4 + VCC SHIPPING TUBE CROSS SECTION TEST CIRCUIT DIAGRAM OUTPUT WAVEFORM MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B 1500 g’s Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B 100°C to 0°C; Water-to-Water; 15 cycles Electrostatic Discharge MIL-STD-883, Mtd 3015 Class II 2 KV to 4 KV Threshold Solderability Hermeticity MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1 Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He Resistance to Soldering Lead Integrity MIL-STD-202, Mtd 210D, Cond. J 235°C; 30 seconds MIL-STD-883, Mtd 2004.5, Cond. A, B1 Lead tension & bend stress Marking Permanence Life Test MIL-STD-883, Mtd 2015.8 MIL-STD-883, Mtd 1005.6 Resistance to solvents 125°C, powered, 1000 hours minimum MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. 2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585 Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 800-888-1499 or www.champtech.com 2 Revision: 03-01-07