3 C ±0,15 2,6 ±0,2 12,6 4,3 4,9 1,5 Verpackung Stange / Stange & Ansaughaube packaging tube / tube&cap 1,27 1,27 100 80 70 60 50 40 30 20 10 Polzahl 0,5 B ±0,15 A ±0,15 a1 1,27 5,65 M 2:1 No. of positions b1 Layout M 2:1 B ±0,1 a1 b1 0,75 Masse und Toleranzen in Übereinstimmung mit ANSI Y15.5M-1994 / Interpret dimensions according to ANSI Y15.5M-1994 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 1,27 1,27 109551 109550 109549 109548 109547 109546 109545 109544 109543 109542 109541 109540 109539 109538 109537 109536 109535 109534 109533 109532 109531 109530 109529 109528 109527 109526 109525 109524 109523 109522 109521 109520 109519 109518 109517 109516 Id-Nr. tube&cap 100 matingcycles Id-Nr. tube&cap 10 matingcycles Id-Nr. tube 100 matingcycles Id-Nr. tube 10 matingcycles Tolerances Information: 100 80 70 60 50 40 30 20 10 66,56 53,86 47,51 41,16 34,81 28,46 22,11 15,76 9,41 Polzahl no of positions 9 11 12 14 17 21 27 38 64 Stück / pieces 62,23 49,53 43,18 36,83 30,48 24,13 17,78 11,43 5,08 Mass A Mass B 65,23 52,53 46,18 39,83 33,48 27,13 20,78 14,43 8,08 Mass C 5:1 Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MiniMez Vertical Female DIP without clips 12,6mm 109515 www.ERNI.com Index Date Class MINIMEZ I A3