MIL-PRF28876 189-015 Environmental Banding Backshell for Multichannel M85045 Shipboard Fiber Optic Cable for Use with MIL-PRF-28876 or Glenair 180-040 Connectors Finish (Table II) Product Series 189 - 015 Basic Part Number C NF Dash Number (Table III) 13 05 - 3 Shell Size (Table I) Length L .310 (7.9) O-Ring (See Note 2) C Dia. B Dia. K Dia. Knurl Style Manufacturer's Option Typ. Accomodates Band Part Number 600-052 2.0 (50.8) 1.0 (25.4) Shrink Sleeving MIL-I-23053/4 (See Note 3) © 2010 Glenair, Inc. B Length in 1/2 Inch Increments (e.g. 3 = 1.5 Inches) A Thread Spacer Ring (See Note 2) Band 600-052 Supplied (Omit if Not Required) CAGE Codes 06324 Cable Entry Internal Mechanical Strain Relief Anti-Rotation (Automatic Clamp used instead of traditional saddle bars to protect optical fibers) Shrink Sleeving MIL-I-23053/5 (See Note 3) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 C-12 E-Mail: [email protected] www.glenair.com MIL-PRF28876 189-015 Environmental Banding Backshell for Multichannel M85045 Shipboard Fiber Optic Cable for Use with MIL-PRF-28876 or Glenair 180-040 Connectors TABLE I: SHELL SIZE Shell Size Designator (Ref) A Thread Class 2B B Dia Max C Dia Max Max Dash Number 11 A 3/4 -20 UNEF 1.028 (26.1) .410 (10.4) 05 13 B 7/8 -20 UNEF 1.141 (29.0) .532 (13.5) 05 15 C 1 -20 UNEF 1.263 (32.1) .710 (18.0) 07 23 F 1-7/16 -18 UNEF 1.703 (43.3) 1.116 (28.3) 13 TABLE I: CABLE ENTRY AND SHRINK SLEEVE DASH NUMBER L Max Dash No. MIL-I-2305/4 Shrink Sleeve Dash No. MIL-I-23053/5 Shrink Sleeve Minimum Maximum .312 (7.9) 1.110 (28.2) -203-0 -107-0 .203 (5.2) .375 (9.5) .395 (10.0) .438 (11.1) 1.210 (30.7) -204-0 -108-0 .328 (8.3) .500 (12.7) .510 (13.0) .562 (14.3) 1.210 (30.7) -204-0 -109-0 .452 (11.5) .625 (15.9) 24 .621 (15.8) .688 (17.5) 1.210 (30.7) -205-0 -106-0 .515 (13.1) .750 (19.1) 28 .736 (18.7) .812 (20.6) 1.360 (34.5) -205-0 -110-0 .640 (16.3) .875 (22.2) Dash No. Clamp Size Cable Size Maximum K Diameter +.005 (0.1) 05 12 .280 (7.1) 07 16 09 20 11 13 Cable Entry TABLE II: FINISH SYM MATERIAL M Aluminum Electroless Nickel FINISH NF Aluminum Cadmium O.D. Over Electroless Nickel (500-Hr. Salt Spray) APPLICATION NOTES 1. Material/ Finishes: 3. MIL-I-23053/4 & 5 Shrink Sleeving are packed loose in a plastic bag. MIL-I-2305/4 Shrink Sleeving to be heat shrinked over rear of Adapter Adapter, Coupling Nut – Aluminim Alloy/See Table II before MIL-I-23053/5 Shrink Sleeving. Clamp Components – Ryton R4XT-Black; Ultem 1000-Natural Anti-Rotation Device – Torlon 4203L-Natural 4. Metric Dimensions (mm) are indicated in parentheses. O-Ring – Fluorosilicone/ N.A. 2. Spacer Ring and O-Ring are packed loose and must be installed with connector at time of assembly. The Spacer is utilized to retain the Terminus Insert. © 2010 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 C-13 E-Mail: [email protected] www.glenair.com C