DC Current Sensor HARTMAN Aerospace Power Products A-701P-I SPST N.O., 400 Amps, 28 VDC Features: • SPST N.O. Main Contacts • Remote Reset • Economizing Coil • 28 VDC • 400 Amps • High Reliability • Meets many requirements of MIL-R-6106 CONTACTOR CONFIGURATION Notes: Dimensions for this product are expressed in inches. Multiply values by 25.4 for millimeters. PRODUCT SPECIFICATIONS Construction Main Contacts: Configuration Voltage (Nominal) Current (Resistive) Auxiliary Contacts: Configuration Voltage (Nominal) Current Resistive Inductive Coil Data: Duty Cycle Voltage (Nominal) Pick-Up Voltage Drop-Out Voltage Coil Current @ 28 VDC & +25°C In-Rush Hold Operating Temperature Life: Electrical Weight Maximum Gasket Sealed, Vented SPST N.O. 28 VDC 400 Amps SPDT 28 VDC 5 Amps 3 Amps Continuous (Economizing) 28 VDC 18 VDC Maximum 0.5 - 7 VDC 2 Amps 0.35 Amp -55°C to +71°C 25,000 Cycles 3 Lbs. 8 Oz. For factory-direct application assistance, contact the HARTMAN product team at (419) 521-9500, Fax (419) 526-2749. © 2004 by Tyco Electronics Corporation. All Rights Reserved. HARTMAN and TYCO are trademarks. Catalog (web doc only) Revised 5-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967