5430/DM5430/DM7430 8-Input NAND Gate Y General Description This device contains a single gate which performs the logic NAND function. Alternate Military/Aerospace device (5430) is available. Contact a National Semiconductor Sales Office/Distributor for specifications. Connection Diagram Dual-In-Line Package TL/F/6510 – 1 Order Number 5430DMBQ, 5430FMQB, DM5430J, DM5430W or DM7430N See NS Package Number J14A, N14A or W14B Function Table Y e ABCDEFGH Inputs Output A thru H Y All Inputs H One or More Input L L H H e High Logic Level L e Low Logic Level C1995 National Semiconductor Corporation TL/F/6510 RRD-B30M105/Printed in U. S. A. 5430/DM5430/DM7430 8-Input NAND Gate June 1989 Absolute Maximum Ratings (Note) Note: The ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the ‘‘Electrical Characteristics’’ table are not guaranteed at the absolute maximum ratings. The ‘‘Recommended Operating Conditions’’ table will define the conditions for actual device operation. If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Supply Voltage 7V Input Voltage 5.5V Operating Free Air Temperature Range b 55§ C to a 125§ C DM54 and 54 DM74 0§ C to a 70§ C Storage Temperature Range b 65§ C to a 150§ C Recommended Operating Conditions Symbol DM5430 Parameter VCC Supply Voltage VIH High Level Input Voltage VIL Low Level Input Voltage IOH High Level Output Current IOL Low Level Output Current TA Free Air Operating Temperature DM7430 Units Min Nom Max Min Nom Max 4.5 5 5.5 4.75 5 5.25 2 V 2 V 0.8 0.8 V b 0.4 b 0.4 mA 16 mA 70 §C 16 b 55 125 0 Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted) Symbol Parameter Conditions Min Typ (Note 1) Max Units b 1.5 V VI Input Clamp Voltage VCC e Min, II e b12 mA VOH High Level Output Voltage VCC e Min, IOH e Max VIL e Max VOL Low Level Output Voltage VCC e Min, IOL e Max VIH e Min II Input Current @ Max Input Voltage VCC e Max, VI e 5.5V IIH High Level Input Current VCC e Max, VI e 2.4V 40 mA IIL Low Level Input Current VCC e Max, VI e 0.4V b 1.6 mA IOS Short Circuit Output Current VCC e Max (Note 2) ICCH Supply Current with Outputs High VCC e Max 1 2 mA ICCL Supply Current with Outputs Low VCC e Max 3 6 mA 2.4 3.4 V 0.2 0.4 V 1 mA DM54 b 20 b 55 DM74 b 18 b 55 mA Switching Characteristics at VCC e 5V and TA e 25§ C (See Section 1 for Test Waveforms and Output Load) Symbol Parameter Conditions tPLH Propagation Delay Time Low to High Level Output CL e 15 pF RL e 400X tPHL Propagation Delay Time High to Low Level Output Note 1: All typicals are at VCC e 5V, TA e 25§ C. Note 2: Not more than one output should be shorted at a time. 2 Min Max Units 22 ns 15 ns Physical Dimensions inches (millimeters) 14-Lead Ceramic Dual-In-Line Package (J) Order Number 5430DMQB or DM5430J NS Package Number J14A 14-Lead Molded Dual-In-Line Package (N) Order Number DM7430N NS Package Number N14A 3 5430/DM5430/DM7430 8-Input NAND Gate Physical Dimensions inches (millimeters) (Continued) 14-Lead Ceramic Flat Package (W) Order Number 5430FMQB or DM5430W NS Package Number W14B LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.