MC33661FS, Local Area Network (LIN) Enhanced Physical Interface With Selecta ...

Analog, Mixed Signal and Power Management
MC33661
Local Area Network (LIN) Enhanced Physical Interface With Selectable SlewRate
Applications
•
•
•
•
•
MC33661 Simplified Application Drawing
Automotive Systems
Robotic Systems
Small DC Motor Control
Stepper Motor Control
Marine Systems
VPWR
Overview
Local interconnect network (LIN) is a serial
communication protocol designed to support
automotive networks in conjunction with controller
area network (CAN). As the lowest level of a
hierarchical network, LIN enables cost-effective
communication with sensors and actuators when
all the features of CAN are not required.
The MC33661 is a physical layer component
dedicated to automotive LIN sub-bus applications.
It offers slew-rate selection for optimized operation
at 10 kbps and 20 kbps, fast baud rate (above
100 kbps) for test and programming modes,
excellent radiated emission performance, and safe
behavior in the event of LIN bus short-to-ground or
LIN bus leakage during low-power mode.
The MC33661 is compatible with LIN Protocol
Specification 2.0.
33661
WAKE
INH
VDD
Regulator
12 V
5.0 V
VSUP
EN
MCU
RXD
LIN
TXD
GND
LIN Bus
Performance
Typical Values
Bus Output
LIN
Data Rate
10 kbps to 20 kbps
+100 kbps option
Operating Voltage
6.0 to 18 V
Sleep/Standby Current
< 8.0 μA
ESD (LIN Bus Terminal)
5000 V
Ambient Operating Temperature
-40 °C  TA +125 °C
Junction Operating Temperature
-40 °C  TJ +150 °C
Features
Protection
• Operational from VSUP 6.0 V to 18 V DC,
Protection
Detect
Shut Down
functional up to 27 V DC, and handles 40 V
Under-voltage

during load dump
• Active bus waveshaping offering excellent
Over-temperature


radiated emission performance
Reverse Battery


• 30 kΩ internal pullup resistor
• LIN bus short-to-ground or high leakage in Ground Disconnection

Sleep mode
Over-current

• -18 V to +40 V DC voltage at LIN terminal
\
• Local and remote wake-up capability
Ordering Information
reported by INH and RXD terminals
• 5.0 V and 3.3 V compatible digital inputs
without any external components required Device
Temperature range (TA)
Tape and Reel,
• Additional devices available for comparison (for
add an R2 suffix)
in Analog Product Selector Guide - SG1002
MC33661PEF
-40 °C  TA +125 °C
and Automotive Product Selector Guide SG187
Auto Retry



Package
8 SOICN
Documentation
Benefits
Document Number
Title
Description
• Low noise emission serial interface
MC33661
Data Sheet
Local Area Network (LIN) Enhanced
Physical Interface with Selectable
Slew-Rate
SG1002
Selector Guide
Analog Product Selector Guide
SG187
Selector Guide
Automotive Product Selector Guide
AN2467
Application Note
Power Quad Flat No-lead Package
• Low system cost
• Industry Standard Communication protocol
• Bus diagnostic and wakeup
Questions
• Do you need a low speed serial
communication interface?
• Do you need a communication interface
compliant to LIN specifications?
• Do you need to reduce the noise emission
on your network?
• What is your maximum communication
speed?
• What is the maximum supply current?
98ASB42564B
8-PIN SOICN
Learn More: For current information about Freescale products,
please visit www.freescale.com.
Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat & Tm. Off.
SMARTMOS is a trademark of Freescale Semiconductor, Inc. All other product or service names are the property
of their respective owners. © Freescale Semiconductor, Inc., 2009-2012. All rights reserved.
Document Number: MC33661FS, Rev 3.0