ATMEL P16V8A

Features
• Industry-standard architecture
•
•
•
•
•
•
•
•
•
– Emulates Many 20-pin PALs®
– Low-cost, easy to use software tools
High speed electrically-erasable programmable logic devices (EE PLD)
– 5ns maximum pin-to-pin delay
Low power, 100μA pin controlled power-down mode option
CMOS and TTL compatible inputs and outputs
– I/O pin keeper circuits
Advanced flash technology
– Reprogrammable
– 100% tested
High reliability CMOS process
– 20 year data retention
– 100 erase/write cycles
– 2,000V ESD protection
– 200mA latchup immunity
Commercial and industrial temperature ranges
Dual-in-line and surface mount packages in standard pinouts
PCI compliant
Green (ROHS compliant) package options available
High Performance
Electrically-erasable
Programmable
Logic Devices
Atmel ATF16V8C
Description
The Atmel® ATF16V8C is a high performance EECMOS programmable logic device (PLD)
that utilizes the Atmel proven electrically-erasable (EE) Flash memory technology. Offered
options include speeds down to 5ns and a 100μA pin-controlled power-down mode. All
speed ranges are specified over the full 5V ± 10% range for industrial temperature ranges,
and 5V ± 5% for commercial range 5V devices.
The ATF16V8C incorporates a superset of the generic architectures, which allows direct
replacement of the 16R8 family and most 20-pin combinatorial PLDs. Eight outputs are
each allocated eight product terms. Three different modes of operation are configured automatically with software, and allow highly complex logic functions to be realized.
The ATF16V8C can significantly reduce total system power, thereby enhancing system reliability and reducing power supply costs. When pin 4 is configured as the power-down
control pin, supply current drops to less than 100μA whenever the pin is high. If the powerdown feature isn't required for a particular application, pin 4 may be used as a logic input.
Also, the pin-keeper circuits eliminate the need for internal pull-up resistors along with their
attendant power consumption.
0425H–PLD–3/11
Figure 0-1.
1. Includes optional PD control pin
Pin configurations
Function
CLK
Clock
I
Logic inputs
I/O
Bidirectinoal buffers
OE
Output enable
VCC
+5V supply
PD
Power-down
I/CLK
I1
I2
PD/I3
I4
I5
I6
I7
I8
GND
2
1
2
3
4
5
6
7
8
9
10
DIP/SOIC
Top view
20
19
18
17
16
15
14
13
12
11
VCC
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I9/OE
I/CLK
I1
I2
PD/I3
I4
I5
I6
I7
I8
GND
1
2
3
4
5
6
7
8
9
10
PLCC
Top view
20
19
18
17
16
15
14
13
12
11
VCC
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I9/OE
I2
I1
I/CLK
VCC
I/O
TSSOP
Top view
PD/I3
I4
I5
I6
I7
4
5
6
7
8
3
2
1
20
19
Pin name
18
17
16
15
14
9
10
11
12
13
Figure 0-2.
I/O
I/O
I/O
I/O
I/O
I8
GND
I9/OE
I/O
I/O
Note:
Block diagram
Atmel ATF16V8C
0425H–PLD–3/11
Atmel ATF16V8C
1.
Absolute maximum ratings*
*NOTICE:
Temperature under bias . . . . . . . . . . . . . . . . . . . . . . . . -40C to +85C
Storage temperature . . . . . . . . . . . . . . . . . . . . . . . . . .-65C to +150C
Voltage on any pin with respect to ground . . . . . -2.0V to +7.0V(1)
Voltage on input pins with respect to ground
during programming . . . . . . . . . . . . . . . . . . . . . . . . -2.0V to +14.0V(1)
Note:
Programming voltage with
respect to ground . . . . . . . . . . . . . . . . . . . . . . . . . . . -2.0V to +14.0V(1)
2.
Stresses beyond those listed under “Absolute
maximum ratings” may cause permanent damage to
the device. This is a stress rating only, and functional
operation of the device at these or any other conditions
beyond those indicated in the operational sections of
this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may
affect device reliability.
1. Minimum voltage is -0.6V DC, which may undershoot
to -2.0V for pulses of less than 20ns. Maximum output pin voltage is VCC + 0.75V DC, which may
overshoot to 7.0V for pulses of less than 20ns.
DC and AC characteristics
Table 2-1.
DC and AC operating conditions
Commercial
Industrial
0C - 70C
-40C - 85C
5V ± 5%
5V ± 10%
Operating temperature (Ambient)
VCC power supply
Table 2-2.
DC characteristics
Symbol
Parameter
Condition
IIL
Input or I/O low leakage current
IIH
Max
Units
0  VIN  VIL (Max)
-10.0
μA
Input or I/O high leakage current
3.5  VIN  VCC
10.0
μA
ICC1(1)
15MHz, VCC = Max,
VIN = 0, VCC, outputs open
Com.
115
mA
Power supply current, standby
Ind.
130
mA
IPD
Power supply current,
Power-down mode
VCC = Max, VIN = 0, VCC
IOS
Output short circuit current
VOUT = 0.5V;
VCC = 5V; TA = 25°C
VIL
Input low voltage
Min < VCC < Max
VIH
Input high voltage
VOL
Output low voltage
VCC = Min; All outputs
IOL = 24mA
VOH
Output high voltage
VCC = Min
IOL = -4.0mA
IOL
Output low current
VCC = Min
IOH
Note:
Output high current
VCC = Min
Min
Typ
Com.
10
100
μA
Ind.
10
105
μA
-150
mA
-0.5
0.8
V
2.0
VCC + 1
V
0.5
V
Com., Ind.
2.4
V
Com.
24.0
mA
Ind.
12.0
mA
Com., Ind.
-4.0
mA
1. All ICC parameters measured with outputs open
3
0425H–PLD–3/11
Figure 3.
Note:
AC waveforms
1. Timing measurement reference is 1.5V. Input AC driving levels are 0.0V and 3.0V, unless otherwise specified.
Table 3-1.
AC characteristics
-5
-10
Symbol
Parameter
tPD
Input or feedback to non-registered output
tCF
Clock to feedback
tCO
Clock to output
1
tS
Input or feedback setup time
3
5
7.5
ns
tH
Input hold time
0
0
0
ns
tP
Clock period
6
8
12
ns
tW
Clock width
3
4
6
ns
fMAX
4
-7
Min
Max
Min
Max
Min
Max
Units
1
5
3
7.5
3
10
ns
6
ns
7
ns
3
4
3
2
5
2
External feedback 1/(tS + tCO)
142
100
68
MHz
Internal feedback 1/(tS + tCF)
166
125
74
MHz
No feedback 1/(tP)
166
125
83
MHz
tEA
Input to output enable – product term
2
6
3
9
3
10
ns
tER
Input to output disable – product term
2
5
2
9
2
10
ns
tPZX
OE pin to output enable
2
5
2
6
2
10
ns
tPXZ
OE pin to output disable
1.5
5
1.5
6
1.5
10
ns
Atmel ATF16V8C
0425H–PLD–3/11
Atmel ATF16V8C
Table 3-2.
Power-down AC characteristics(1)(2)(3)
-5
-7
Symbol
Parameter
Min
tIVDH
Valid Input before PD High
5.0
7.5
10
ns
tGVDH
Valid OE before PD High
0
0
0
ns
tCVDH
Valid Clock before PD High
0
0
0
ns
tDHIX
Input Don’t Care after PD High
5.0
7.5
10
ns
tDHGX
OE Don’t Care after PD High
5.0
7.5
10
ns
tDHCX
Clock Don’t Care after PD High
5.0
7.5
10
ns
tDLIV
PD Low to Valid Input
5.0
7.5
10
ns
tDLGV
PD Low to Valid OE
15.0
20.0
25
ns
tDLCV
PD Low to Valid Clock
15.0
20.0
25
ns
tDLOV
PD Low to Valid Output
20.0
25.0
30
ns
Note:
Max
Min
-10
Max
Min
Max
Units
1. Output data is latched and held
2. HI-Z outputs remain HI-Z
3. Clock and input transitions are ignored
4.
Input test waveforms and measurement levels:
tR, tF < 1.5ns (10% to 90%)
5.
Output test loads
5.0V
R1 = 200
OUTPUT
PIN
R2 = 200
6.
CL = 50 pF
Pin capacitance
Table 6-1.
Pin capacitance
Typ
Max
Units
CIN
5
8
pF
VIN = 0V
COUT
6
8
pF
VOUT = 0V
Note:
Conditions
1. Typical values for nominal supply voltage. This parameter is only sampled and is not 100% tested.
5
0425H–PLD–3/11
7.
Power-up reset
Registers of the ATF16V8C are designed to reset during power-up. At a point delayed slightly from VCC crossing VRST, all
registers will be reset to the low state. As a result, the registered output state will always be high on power-up.
This feature is critical for state machine initialization. However, due to the asynchronous nature of reset and the uncertainty
of how VCC actually rises in the system, the following conditions are required:
1.
2.
3.
9.
The VCC rise must be monotonic, from below 0.7V
After reset occurs, all input and feedback setup times must be met before driving the clock term high, and
The signals from which the clock is derived must remain stable during tPR
Figure 8.
Power-up reset
Table 8-1.
Power-up reset parameters
Parameter
Description
Typ
Max
Units
tPR
Power-up
Reset Time
600
1,000
ns
VRST
Power-up
Reset Voltage
3.8
4.5
V
Power-down mode
The ATF16V8C includes an optional pin controlled powerdown feature. Device pin 4 may be configured as the powerdown pin. When this feature is enabled and the power-down pin is high, total current consumption drops to less than
100μA. In the power-down mode, all output data and internal logic states are latched and held. All registered and
combinatorial output data remains valid. Any outputs that were in a high-Z state at the onset of power-down will remain at
high-Z. During power-down, all input signals except the power-down pin are blocked. The input and I/O pin-keeper circuits
remain active to insure that pins do not float to indeterminate levels. This helps to further reduce system power.
Selection of the power-down option is specified in the ATF16V8C logic design file. The logic compiler will include this option
selection in the otherwise standard 16V8 JEDEC fuse file. When the power-down feature is not specified in the design file,
pin 4 is available as a logic input, and there is no power-down pin. This allows the ATF16V8C to be programmed using any
existing standard 16V8 fuse file.
Note:
10.
Some programmers list the JEDEC-compatible 16V8C (No PD used) separately from the non-JEDEC compatible 16V8CEXT.
(EXT for extended features.)
Registered output preload
Registers of the ATF16V8C are provided with circuitry to allow loading of each register with either a high or a low. This
feature will simplify testing since any state can be forced into the registers to control test sequencing. A JEDEC file with
preload is generated when a source file with vectors is compiled. Once downloaded, the JEDEC file preload sequence will
be done automatically by approved programmers.
6
Atmel ATF16V8C
0425H–PLD–3/11
Atmel ATF16V8C
11.
Security fuse usage
A single fuse is provided to prevent unauthorized copying of the ATF16V8C fuse patterns. Once programmed, fuse verify
and preload are inhibited. However, the 64-bit user signature remains accessible.
The security fuse will be programmed last, as its effect is immediate.
12.
Input and I/O pin-keeper circuits
The ATF16V8C contains internal input and I/O pin-keeper circuits. These circuits allow each ATF16V8C pin to hold its
previous value even when it is not being driven by an external source or by the device’s output buffer. This helps insure
that all logic array inputs are at known, valid logic levels. This reduces system power by preventing pins from floating to
indeterminate levels. By using pin-keeper circuits rather than pull-up resistors, there is no DC current required to hold the
pins in either logic state (high or low).
These pin-keeper circuits are implemented as weak feedback inverters, as shown in the Input Diagram below. These
keeper circuits can easily be overdriven by standard TTL- or CMOS-compatible drivers. The typical overdrive current
required is 40μA.
Figure 13.
Input diagram
Figure 14.
I/O diagram
7
0425H–PLD–3/11
15.
Functional logic diagram description
The logic option and functional diagrams describe the ATF16V8C architecture. Eight configurable macrocells can be
configured as a registered output, combinatorial I/O, combinatorial output, or dedicated input.
The ATF16V8C can be configured in one of three different modes. Each mode makes the ATF16V8C look like a different
device. Most PLD compilers can choose the right mode automatically. The user can also force the selection by supplying
the compiler with a mode selection. The determining factors would be the usage of register versus combinatorial outputs
and dedicated outputs versus outputs with output enable control.
The ATF16V8C universal architecture can be programmed to emulate many 20-pin PAL devices. These architectural
subsets can be found in each of the configuration modes described in the following pages. The user can download the
listed subset device JEDEC programming file to the PLD programmer, and the ATF16V8C can be configured to act like the
chosen device. Check with your programmer manufacturer for this capability.
Unused product terms are automatically disabled by the compiler to decrease power consumption. A security fuse, when
programmed, protects the content of the ATF16V8C. Eight bytes (64 fuses) of user signature are accessible to the user
for purposes such as storing project name, part number, revision, or date. The user signature is accessible regardless of the
state of the security fuse.
Table 15-1.
Compiler mode selection
Registered
ABEL, Atmel-ABEL
With PD ENABLE
CUPL, Atmel-CUPL
With PD ENABLE
LOG/iC
Complex
Simple
Auto select
P16V8R
P16V8C
P16V8AS
P16V8
P16V8PDR(1)
P16V8PDC(1)
P16V8PD(1)
P16V8PDS(1)
G16V8MS
G16V8MA
G16V8AS
G16V8A
G16V8CPMS
G16V8CPMA
G16V8CPAS
G16V8CP
GAL16V8_R(2)
GAL16V8_C7(2)
GAL16V8_C8(2)
GAL16V8
OrCAD-PLD
“Registered”
“Complex”
“Simple”
GAL16V8A
PLDesigner
P16V8R
P16V8C
P16V8C
P16V8A
Synario/Atmel-Synario
NA
NA
NA
ATF16V8C ALL
With PD ENABLE
NA
NA
NA
ATF16V8C (PD) ALL(1)
G16V8R
G16V8C
G16V8AS
G16V8
Tango-PLD
Note:
1. Please call Atmel PLD Hotline at (408) 436-4333 for more information
2. Only applicable for version 3.4 or lower
16.
Macrocell configuration
Software compilers support the three different OMC modes as different device types. These device types are listed in the
table below. Most compilers have the ability to automatically select the device type, generally based on the register usage
and output enable (OE) usage. Register usage on the device forces the software to choose the registered mode. All
combinatorial outputs with OE controlled by the product term will force the software to choose the complex mode. The
software will choose the simple mode only when all outputs are dedicated combinatorial without OE control. The different
device types listed in the table can be used to override the automatic device selection by the software. For further details,
refer to the compiler software manuals.
When using compiler software to configure the device, the user must pay special attention to the following restrictions in
each mode.
In registered mode, pin 1 and pin 11 are permanently configured as clock and output enable, respectively. These pins
cannot be configured as dedicated inputs in the registered mode.
In complex mode, pin 1 and pin 11 become dedicated inputs and use the feedback paths of pin 19 and pin 12
respectively. Because of this feedback path usage, pin 19 and pin 12 do not have the feedback option in this mode.
8
Atmel ATF16V8C
0425H–PLD–3/11
Atmel ATF16V8C
In simple mode, all feedback paths of the output pins are routed via the adjacent pins. In doing so, the two inner most pins
(pins 15 and 16) will not have the feedback option as these pins are always configured as dedicated combinatorial output.
16.1
Atmel ATF16V8C registered mode
PAL device emulation/PAL replacement. The registered mode is used if one or more registers are required. Each
macrocell can be configured as either a registered or combinatorial output or I/O, or as an input. For a registered output or
I/O, the output is enabled by the OE pin, and the register is clocked by the CLK pin. Eight product terms are allocated to
the sum term. For a combinatorial output or I/O, the output enable is controlled by a product term, and seven product
terms are allocated to the sum term. When the macrocell is configured as an input, the output enable is permanently
disabled.
Any register usage will make the compiler select this mode. The following registered devices can be emulated using this
mode:
16R8
16R6
16R4
Figure 17.
Notes:
16RP8
16RP6
16RP4
Registered configuration for registered mode(1)(2)
1. Pin 1 controls common CLK for the registered outputs.
Pin 11 controls common OE for the registered outputs.
Pin 1 and Pin 11 are permanently configured as CLK and OE.
2. The development software configures all the architecture control bits and checks for proper pin usage automatically.
Figure 18.
Notes:
Combinatorial configuration for registered mode(1)(2)
1. Pin 1 and Pin 11 are permanently configured as CLK and OE.
2. The development software configures all the architecture control bits and checks for proper pin usage automatically.
9
0425H–PLD–3/11
Figure 19.
Note:
10
Registered mode logic diagram
* Input not available if power-down mode is enabled
Atmel ATF16V8C
0425H–PLD–3/11
Atmel ATF16V8C
20.
Atmel ATF16V8C complex mode
PAL device emulation/PAL replacement. In the complex mode, combinatorial output and I/O functions are possible.
Pins 1 and 11 are regular inputs to the array. Pins 13 through 18 have pin feedback paths back to the AND-array, which
makes full I/O capability possible. Pins 12 and 19 (outermost macrocells) are outputs only. They do not have input
capability. In this mode, each macrocell has seven product terms going to the sum term and one product term enabling the
output.
Combinatorial applications with an OE requirement will make the compiler select this mode. The following devices can be
emulated using this mode:
16L8
16H8
16P8
Figure 21.
22.
Complex Mode Option
Atmel ATF16V8C simple mode
PAL device emulation/PAL replacement. In the simple mode, eight product terms are allocated to the sum term. Pins
15 and 16 (center macrocells) are permanently configured as combinatorial outputs. Other macrocells can be either inputs
or combinatorial outputs with pin feedback to the AND-array. Pins 1 and 11 are regular inputs.
The compiler selects this mode when all outputs are combinatorial without OE control. The following simple PALs can be
emulated using this mode:
10L8 10H8 10P8
12L6 12H6 12P6
14L4 14H4 14P4
16L2 16H2 16P2
Figure 23.
Simple mode option
0
1
11
0425H–PLD–3/11
Figure 24.
Note:
12
Complex mode logic diagram
* Input not available if power-down mode is enabled
Atmel ATF16V8C
0425H–PLD–3/11
Atmel ATF16V8C
Note:
Simple mode logic diagram
Note:
* Input not available if power-down mode is enabled
13
0425H–PLD–3/11
14
Atmel ATF16V8C
0425H–PLD–3/11
Atmel ATF16V8C
15
0425H–PLD–3/11
16
Atmel ATF16V8C
0425H–PLD–3/11
Atmel ATF16V8C
25.
Ordering information
tPD (ns)
tS (ns)
tCO (ns)
Atmel ordering code*
Package
Operation range
5
3
4
ATF16V8C-5JX
20J
Commercial
(0C to 70C)
7.5
5
5
ATF16V8C-7JU
ATF16V8C-7PU
ATF16V8C-7SU
20J
20P3
20S
Industrial
(-40C to 85C)
5
3
4
ATF16V8C-5JC
20J
Commercial
(0C to 70C)
ATF16V8C-7JC
ATF16V8C-7PC
ATF16V8C-7SC
ATF16V8C-7XC
20J
20P3
20S
20X
Commercial
(0C to 70C)
ATF16V8C-7JI
ATF16V8C-7PI
ATF16V8C-7SI
ATF16V8C-7XI
20J
20P3
20S
20X
Industrial
(-40C to 85C)
ATF16V8C-10JI
20J
Industrial
(-40C to 85C)
7.5
10
5
7.5
5
7
Using “C” Product for Industrial
To use commercial product for Industrial temperature ranges, down-grade one speed grade from the “I” to the “C”
device (7ns “C” = 10ns “I”) and de-rate power by 30%.
Notes:
1. *Shaded parts are being obsoleted in 2011
2. The suffix, “U” and “X” as part of the ordering code, implies the package is ROHS compliant and lead free
Package type
20J
20-lead, Plastic J-leaded Chip Carrier (PLCC)
20P3
20-lead, 0.300" Wide, Plastic Dual Inline Package (PDIP)
20S
20-lead, 0.300" Wide, Plastic Gull-Wing Small Outline (SOIC)
20X
20-lead, 4.4 mm Wide, Plastic Thin Shrink Small Outline (TSSOP)
17
0425H–PLD–3/11
26.
Package Drawings
20J – PLCC
PIN NO. 1
1.14(0.045) X 45˚
1.14(0.045) X 45˚
0.318(0.0125)
0.191(0.0075)
IDENTIFIER
e
E1
E
D2/E2
B1
B
A2
D1
A1
D
A
0.51(0.020)MAX
45˚ MAX (3X)
COMMON DIMENSIONS
(Unit of Measure = mm)
Notes:
1. This package conforms to JEDEC reference MS-018, Variation AA.
2. Dimensions D1 and E1 do not include mold protrusion.
Allowable protrusion is .010"(0.254 mm) per side. Dimension D1
and E1 include mold mismatch and are measured at the extreme
material condition at the upper or lower parting line.
3. Lead coplanarity is 0.004" (0.102 mm) maximum.
SYMBOL
MIN
NOM
MAX
A
4.191
–
4.572
A1
2.286
–
3.048
A2
0.508
–
–
D
9.779
–
10.033
D1
8.890
–
9.042
E
9.779
–
10.033
E1
8.890
–
9.042
D2/E2
7.366
–
8.382
B
0.660
–
0.813
B1
0.330
–
0.533
e
NOTE
Note 2
Note 2
1.270 TYP
10/04/01
R
18
2325 Orchard Parkway
San Jose, CA 95131
TITLE
20J, 20-lead, Plastic J-leaded Chip Carrier (PLCC)
DRAWING NO.
REV.
20J
B
Atmel ATF16V8C
0425H–PLD–3/11
Atmel ATF16V8C
20P3 – PDIP
D
PIN
1
E1
A
SEATING PLANE
A1
L
B
B1
e
E
COMMON DIMENSIONS
(Unit of Measure = mm)
C
eC
eB
Notes:
1. This package conforms to JEDEC reference MS-001, Variation AD.
2. Dimensions D and E1 do not include mold Flash or Protrusion.
Mold Flash or Protrusion shall not exceed 0.25 mm (0.010").
SYMBOL
MIN
NOM
MAX
5.334
A
–
–
A1
0.381
–
–
D
24.892
–
26.924
E
7.620
–
8.255
E1
6.096
–
7.112
B
0.356
–
0.559
B1
1.270
–
1.551
L
2.921
–
3.810
C
0.203
–
0.356
eB
–
–
10.922
eC
0.000
–
1.524
e
NOTE
Note 2
Note 2
2.540 TYP
1/23/04
R
2325 Orchard Parkway
San Jose, CA 95131
TITLE
20P3, 20-lead (0.300"/7.62 mm Wide) Plastic Dual
Inline Package (PDIP)
DRAWING NO.
20P3
REV.
D
19
0425H–PLD–3/11
20S – SOIC
20
Atmel ATF16V8C
0425H–PLD–3/11
Atmel ATF16V8C
20X – TSSOP
Dimensions in Millimeters and (Inches).
Controlling dimension: Millimeters.
JEDEC Standard MO-153 AC
INDEX MARK
PIN
1
4.50 (0.177) 6.50 (0.256)
4.30 (0.169) 6.25 (0.246)
6.60 (.260)
6.40 (.252)
0.65 (.0256) BSC
0.30 (0.012)
0.19 (0.007)
1.20 (0.047) MAX
0.15 (0.006)
0.05 (0.002)
SEATING
PLANE
0.20 (0.008)
0.09 (0.004)
0º ~ 8º
0.75 (0.030)
0.45 (0.018)
10/23/03
R
2325 Orchard Parkway
San Jose, CA 95131
TITLE
20X, (Formerly 20T), 20-lead, 4.4 mm Body Width,
Plastic Thin Shrink Small Outline Package (TSSOP)
DRAWING NO.
REV.
20X
C
21
0425H–PLD–3/11
27.
22
Revision history
Doc. rev.
Date
0425H
03/2011
Comments
Added green (ROHS compliant) package options
Removed lead based packaged from ordering section
Atmel ATF16V8C
0425H–PLD–3/11
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131
USA
Tel: (+1) (408) 441-0311
Fax: (+1) (408) 487-2600
www.atmel.com
Atmel Asia Limited
Unit 01-5 & 16, 19F
BEA Tower, Millennium City 5
418 Kwun Tong Road
Kwun Tong, Kowloon
HONG KONG
Tel: (+852) 2245-6100
Fax: (+852) 2722-1369
Atmel Munich GmbH
Business Campus
Parkring 4
D-85748 Garching b. Munich
GERMANY
Tel: (+49) 89-31970-0
Fax: (+49) 89-3194621
Atmel Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
JAPAN
Tel: (+81) (3) 3523-3551
Fax: (+81) (3) 3523-7581
© 2011 Atmel Corporation. All rights reserved. / Rev.: 0425H–PLD–3/11
Atmel®, logo and combinations thereof, and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel
products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY
RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE
THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to
make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not
be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.