Custom Connector System 181-012 Fiber Optic Pin Terminus Size 16 Front Release 181-012-126 Product Series Basic Number Dash Number (Table I) .94 (23.9) O-Ring .54 (13.7) .16 (4.1) A Dia .077 (2.0) Dia Ferrule Spring Spring Clip .116 (3.0) Dia Crimp Sleeve P/n 265-002 (See Note 5) APPLICATION NOTES 1. 2. Assembly packaged in plastic bag and tag identified with manufacturer's name and part number. Material/Finish: Ferrule: Zirconia Ceramic/N.A. Protective Cover: Spring Alloy/Nickel Terminus Assembly: Stainless Steel/Passivate Spring Material: Stainless Steel Passivate Spring Clip: Spring Alloy/N.A. O-Ring: Fluorosilicone Crimp Sleeve: Brass Alloy/Nickel © 2006 Glenair, Inc. 3. 4. 5. Alignment Sleeve with Protective Cover and Crimp Sleeve may be ordered separately (Table II). Consult factory for termination and assembly tools/procedures. Metric dimensions (mm) are in parentheses. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] H-4 www.glenair.com Custom Connector System 181-012 Fiber Optic Pin Terminus Size 16 Front Release TABLE I: DASH NUMBER Assembly Dash No. Fiber Size Core/Cladding A Dia (mm) 125 9/125 (Singlemode) .125 126 50/125 .126 126 62.5/125 .126 142 100/140 .142 156 62.5/125/155 (Polyimide) .156 175 100/140/172 (Polyimide) .175 233 200/225 .233 236 200/230 .236 280 200/280 .286 440 400/440 .448 TABLE II: TERMINUS ACCESSORIES Assembly Dash No. 265-002 Crimp Sleeve 182-015 Removal Tool 182-005P © 2006 Glenair, Inc. Terminus Accessories Pin terminus Polishing Tool 182-014 Insertion Tool, 90° 182-013 Insertion Tool, Straight 182-012 Crimp Tool CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] H-5 www.glenair.com