IPC-1752-2_v1.1_SOIC18_OSE

This document is a declaration of the substances within the manufacturer listed item. Note: if the item is an assembly
with lower level parts, the declaration encompasses all lower level materials for which the manufacturer has
© Copyright 2005. IPC, Bannockburn, Illinois. All rights reserved under engineering responsibility.
both international and Pan-American copyright conventions.
Adobe Reader version 7.0.5 is required to complete this declaration.
Material Composition Declaration
1752-2
IPC Web Site for Information on IPC-1752 Standard
http://www.ipc.org/IPC-175x
1.1
Form Type *
Distribute
Declaration Class *
Class 6 - RoHS Yes/No, Homogeneous Materials and Mfg Informat
Supplier Information
Company Name *
Company Unique ID
Unique ID Authority
Response Date *
Cypress Semiconductor CorpCypress
Contact Name *
Title - Contact
Phone - Contact *
2009-06-01
Email - Contact *
Richard Oshiro
Quality Systems Director
Authorized Representative * Title - Representative
408 943 2102
Phone - Representative *
[email protected]
Email - Representative *
Glorioso Lutrinia
Requester Item Number
EH & S Manager
632 812 8161
[email protected]
Mfr Item Number
Mfr Item Name
Effective Date
SOIC 18
SOIC 18
2009-06-01
Alternate Recommendation
Version
Response Document ID
Duplicate
Contact -> Authorized Representative
Supplier Comments or URL for Additional Information
Manufacturing Site
Weight *
UOM
OSE T
493
mg
Package
QTP
No.
060304
Alternate Item Comments
Unit Type
Each
Manufacturing Process Information
Terminal Plating / Grid Array Material
Matte Tin (Sn)
Terminal Base Alloy
CU Alloy
J-STD-020 MSL Rating
3
Peak Process Body Temperature Max Time at Peak Temperature Number of Reflow Cycles
260 C
40 seconds 3
Comments
Compliant to RoHS Requirements; 300 mils
* Required Field
CAS Registry Number(R) is a Registered Trademark of the American Chemical Society
Form enabled by Adobe
Save the fields in
this form to a file
Export Data
Import fields from a
file into this form
Import Data
Clear all of the
fields on this form
Reset Form
Lock the fields on this
form to prevent changes
RoHS Material Composition Declaration
Declaration Type *
Lock Supplier Fields
Detailed
RoHS Directive RoHS Definition: Quantity limit of 0.1% by mass (1000 PPM) in homogeneous material for: Lead (Pb), Mercury, Hexavalent Chromium, Polybrominated Biphenyls (PBB),
2002/95/EC
Polybrominated Diphenyl Ethers (PBDE) and quantity limit of 0.01% by mass (100 PPM) of homogeneous material for Cadmium
Please indicate whether any homogeneous material (as defined by the RoHS Directive, EU 2002/95/EC and implemented by the laws of the European Union member states) of the part identified on this form contains lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls and/or polybrominated diphenyl ethers (each a “RoHS restricted substance”) in excess of the applicable quantity limit identified above. If a homogeneous material within the part contains a RoHS restricted substance in
excess of an applicable quantity limit, please indicate below which, if any, RoHS exemption you believe may apply. If the part is an assembly with lower level components, the declaration shall encompass all such components. Supplier certifies that it
gathered the information it provides in this form using appropriate methods to ensure its accuracy and that such information is true and correct to the best of its knowledge and belief, as of the date that Supplier completes this form. Supplier acknowledges that
Company will rely on this certification in determining the compliance of its products with European Union member state laws that implement the RoHS Directive. Company acknowledges that Supplier may have relied on information provided by others in
completing this form, and that Supplier may not have independently verified such information. However, in situations where Supplier has not independently verified information provided by others, Supplier agrees that, at a minimum, its suppliers have provided
certifications regarding their contributions to the part, and those certifications are at least as comprehensive as the certification in this paragraph. If the Company and the Supplier enter into a written agreement with respect to the identified part,the terms and
conditions of that agreement, including any warranty rights and/or remedies provided as part of that agreement, will be the sole and exclusive source of the Supplier’s liability and the Company’s remedies for issues that arise regarding information the Supplier
provides in this form. In the absence of such written agreement, the warranty rights and/or remedies of Supplier's Standard Terms and Conditions of Sale applicable to such part shall apply.
Supplier Acceptance * Accepted
RoHS Declaration * 1 - Item(s) does not contain RoHS restricted substances per the definition above
Exemptions: If the declared item does not contain RoHS restricted substances per the definition above except for defined RoHS exemptions, then select the corresponding response in the RoHS Declaration
above and choose all applicable exemptions.
Declaration Signature
Instructions: Complete all of the required fields on all pages of this form. Select the "Accepted" on the Supplier Acceptance drop-down. This will display the signature area. Digitally sign
the declaration (if required by the Requester) and click on Submit Form to have the form returned to the Requester.
Supplier Digital Signature
Glorioso Lutrinia
* Required Field
Digitally signed by Glorioso Lutrinia
DN: cn=Glorioso Lutrinia, o=Cypress Semiconductor Corporation, ou,
[email protected], c=PH
Date: 2009.06.22 18:52:14 +08'00'
CAS Registry Number(R) is a Registered Trademark of the American Chemical Society
Form enabled by Adobe
Homogeneous Material Composition Declaration for Electronic Products
SubItem Instructions: The presence of any JIG Level A or B substances must be declared. [1] indicate the subpart in which the substance is located, [2] provide a description of the
homogeneous material [3], enter the weight of the homogeneous material.
Substance Instructions: [A] select the Level (JIG A, JIG B, Requester or Supplier) [B] select the substance category (JIG or Requester) or enter a value (Supplier). [C] select the
substance (JIG) or enter the substance and CAS (Other). [D] select a RoHS exemption, if applicable [E] enter the weight of the substance or the PPM concentration [F] Optionally enter the
positive (+) and negative (-) tolerance in percent (Note: percent tolerance values are expected to cover a 3 sigma range of distribution unless otherwise noted).
Line Functions: +I Inserts a New Item /SubItem +M Inserts a new Material
Item/SubItem
Name
Homogeneous
Material
+I -I Lead Frame
+M -M Base Material
Weight
Unit of
Measure
129.7
mg
Level
+C Inserts a new Substance Category
Substance Category
+S Inserts a new Substance
Substance
CAS
- Deletes the element line
Exempt Weight
Unit of Tolerance
PPM
Measure +
+C -C Supplier
Copper
+S -S Copper
7440-50-8
126.5
mg
256,39
+C -C Supplier
Iron
+S -S Iron
7440-67-7
3
mg
6,045
+C -C A
Lead/Lead Compound +S -S Lead
7439-92-1
0
mg
18
+C -C Supplier
Silver
+S -S Silver
7440-22-4
0.2
mg
386
+I -I Lead Finish
+M -M External Plating 1.1
mg
+C -C Supplier
Tin
+S -S Tin
7440-31-5
1.1
mg
2,220
+I -I Die Attach
+M -M Adhesive
mg
+C -C Supplier
Phenolic Resin
+S -S Phenolic Resin
Trade Secre
0
mg
30
+C -C Supplier
Silver
+S -S Silver
7440-22-4
0.5
mg
973
+C -C Supplier
Curing & Hardening A+S -S Curing & Hardening Ag Trade Secre
0
mg
30
+C -C Supplier
Epoxy resin
+S -S Epoxy resin
Trade Secre
0.1
mg
182
0.6
+I -I Die
+M -M Circuit
3.5
mg
+C -C Supplier
Silicon
+S -S Silicon
7440-21-3
3.5
mg
7,093
+I -I Wire
+M -M Interconnect
0.3
mg
+C -C Supplier
Gold
+S -S Gold
7440-57-5
0.3
mg
709
+I -I Mold Compound
+M -M Encapsulation
358.2
mg
+C -C Supplier
Epoxy Resin
+S -S Epoxy Resin
Trade Secre
26.9
mg
54,443
+C -C Supplier
Silica
+S -S Silica
60676-86-0
311.6
mg
631,54
+C -C Supplier
Phenol Resin
+S -S Phenol Resin
Trade Secre
19.7
mg
39,925
* Required Field
CAS Registry Number(R) is a Registered Trademark of the American Chemical Society
Form enabled by Adobe