SIM-012ST Sensors High power chip sensor, side view type SIM-012ST The SIM-012ST is ultra small size and high power ohip sensor. Original technology, original structure and original Optical design enable to use Automatic moantinig machine, Reflow, ultra smallsize, High power. zExternal dimensions (Units : mm) zApplications Optical control equipment Light source for remote control devices Note) 1.Unspecified tolerance shall be + − 0.2. 2.Dimension in parenthesis are show for reference. 0.25 zFeatures 1) High power by φ2 lenze. 2) Emitting pore can have 7time high power then substruk type with parabola structure. 3) Ultra-compact surface mount package. (3mmx3mmx2mm) 4) It is possible to do Refliw. 1 2 2 2-0.4 3 0.8 2 3 R1 Internal connection diagram 2 1 zAbsolute maximum ratings (Ta = 25°C) Parameter Symbol Limits Unit Forward current IF 40 mA Reverse voltage VR 5 V power dissipation PD 60 mW Pulse forward current IFP∗ 0.5 A Operating temperature Topr −30~+85 °C Storage temperature Tstg −40~+100 °C ∗ Pulse width=0.1msec, duty ratio 1% 1/3 SIM-012ST Sensors zElectrical and optical characteristics (Ta = 25°C) Parameter Symbol Min. Typ. Unit Max. Conditions Optical output PO − 3.5 − mW IF=20mA Emitting strength IE 0.9 − 7.1 mW/sr IF=20mA Forward voltage VF − 1.2 1.5 V IF=20mA Reverse current IR − − 10 µA VR=3V peak light emitting wavelength λP − 950 − nm IF=20mA Spectral line half width ∆λ − 40 − nm IF=20mA Half-viewing angle θ1 / 2 − ±12 − deg IF=20mA Pesponse time tr·tf − 1.0 − µs IF=20mA fC − 1.0 − MHz IF=20mA Cut-off frrequency zElectrical and optical characteristic curves 8 50 40 30 20 10 0 −20 0 20 40 60 80 25°C 50°C 30 75°C 20 10 AMBIENT TEMPERATURE : Ta (°C) 1 FORWARD VOLTAGE : VF (V) 2 1000 6 4 2 0 0 10 20 30 40 FORWARD CURRENT : IF (mA) Fig.2 Forward current vs. forward voltage Fig.1 Forward current faloff Fig.3 Emitting strength vs. forward currnt 100 RELATIVE OPTICAL OUTPUT : PO (%) RELATIVE EMITTING STRENGTH : IE (%) −25°C 0°C 40 0 0 100 EMITTING STRENGTH : IE (mW/sr) FORWARD CURRENT : IF (mA) FORWARD CURRENT : IF (mA) 50 100 10 −50 −25 0 25 50 75 100 AMBIENT TEMPERATURE : Ta (°C) 80 60 40 20 0 900 920 940 960 980 1000 OPTICAL WAVELENGTH : λ (nm) Fig.4 Relative emitting strength vs.ambient temperature Fig.5 Wavelength 2/3 SIM-012ST Sensors − 90 0 100 + RELATIVE EMITTING STRENGTH (%) RELATIVE EMITTING STRENGTH (%) 100 80 70 60 50 40 30 20 10 0 −90 −60 −30 0 30 60 90 − 90 0 + 80 70 60 50 40 30 20 10 0 −90 −60 −30 0 30 60 ANGULAR DISPLACEMENT : θ (deg) ANGULAR DISPLACEMENT : θ (deg) Fig.6 Directional pattem(1) Fig.7 Directional pattem(2) 90 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0