RSA6.1J4 Diodes ESD Protection diode RSA 6.1J4 zApplication ESD protection zExternal dimensions (Unit : mm) zLand size figure (Unit : mm) 0.4 0.13±0.05 0.25 0.15 1.2±0.1 (4) zConstruction Silicon epitaxial planar (1) (2) 0.5 0.5 1.6±0.1 (5) 0.5 0～0.1 0.5 EMD5 (3) 1.0±0.1 0.15 0.25 0.3 1.55 0.22±0.05 zFeatures 1) Ultra small mold type. (EMD5) 2) High reliability. 0.45 1.6±0.1 zStructure 0.5±0.05 ROHM : EMD5 JEITA : SC-75A Size dot (year week factory) zTaping specifications (Unit : mm) φ1.5±0.1 0 2.0±0.05 0.3±0.1 1PIN φ0.8±0.1 4.0±0.1 8.0±0.2 1.65±0.01 0～0.1 1.65±0.1 1.65±0.1 5.5±0.2 3.5±0.05 1.75±0.1 4.0±0.1 0.65±0.1 zAbsolute maximum ratings (Ta=25°C) Param eter Sym bol Lim its Unit P pk P pk 10 80 150 W W -55 to +150 ℃ Peak puls e power-1 (tp=10×1000us ) P eak puls e power-2 (tp=8×20us ) J unction tem perature Tj Ts tg S torage tem perature ℃ zElectrical characteristics (Ta=25°C) Param eter Zener voltage Sym bol Min. Typ. Max. Unit VZ 6.1 - 7.20 V Conditions IZ=1m A R evers e current IR - - 1.0 µA VR =3.0V Forward voltage VF - - 1.0 V IF=100m A C apacitance between term inals Ct - 35 - pF f=1MHz,VR =0V Rev.B 1/2 RSA6.1J4 Diodes zElectrical characteristic curves (Ta=25°C) 1000 10 Ta=125℃ Ta=150℃ Ta=-25℃ 0.1 1000 Ta=125℃ f=1MHz 10 Ta=75℃ 1 0.1 Ta=25℃ 0.01 Ta=-25℃ 0.001 0.01 CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=25℃ REVERSE CURRENT:IR (nA) ZENER CURRENT:Iz(mA) Ta=75℃ 1 Ta=150℃ 100 100 10 0.0001 6 6.5 7 7.5 ZENER VOLTAGE:Vz(V) Vz-Iz CHARACTERISTICS 0 8 0.5 1 2 2.5 0 3 6.5 0.14 0.12 0.1 0.08 0.06 AVE:0.0190nA 0.04 AVE:6.684V 6.4 TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) 1 1 ZENER CURRENT(mA) Zz-Iz CHARACTERISTICS 10 2.5 3 Ta=25℃ f=1MHz VR=0V n=10pcs 42 41 40 39 38 37 36 35 1000 10 2 43 0 IR DISRESION MAP 100 1.5 44 0.02 Vz DISRESION MAP 0.1 CAPACITANCE BETWEENTERMINALS:Ct(pF) 6.6 1 45 Ta=25℃ VR=3V n=30pcs 0.16 REVERSE CURRENT:IR(nA) 6.7 0.5 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 0.2 0.18 Ta=25℃ IZ=1mA n=30pcs 6.8 DYNAMIC IMPEDANCE:Zz(Ω) 1.5 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 6.9 ZENER VOLTAGE:Vz(Ｖ) 1 0.00001 0.001 AVE:37.82pF Ct DISRESION MAP Rth(j-a) 100 Rth(j-c) Mounted on epoxy board IM=10mA IF=100mA 10 1ms time 300us 1 0.001 0.01 0.1 1 10 100 TIME:t(s) Rth-t CHARACTERISTICS 1000 Rev.B 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1