MIL-DTL 24308 280-006 MIL-DTL-24308/9 Hermetic Glass-Sealed D-Subminiature Receptacle Connector Style Shell Size 280 - 006 MIL-DTL-24308/9 D-Subminiature Hermetic R.062 Typ TERMINATION vIEW Contact Style P = Solder Cup X = Eyelet K 1 A Flange Type A = Solid B = Two #4-40 Lockposts Class H = Standard Hermetic K = Space Grade Hermetic ENGAGEMENT vIEW .238 Max K R.093 Typ 10° Typ D H Ø.040±.001 F C B A See Note 2 25° Typ Eyelets G SOLDER CUP ORIENTATION SIZES 1-4 P SIZE 5 .046 .032 .161 Max #4-40 Unc-2b X .125 Min Full Thread .335 .316 FLANGE TYPE A FLANGE TYPE B E Insert Arrangement Shown Are For Reference Only APPLICATION NOTES H 1. To be identified with manufacturer’s name, part number and date code, space permitting. 2. Contact Style: Eyelet or Solder Cup (See Part Number Development). 3. Material/Finish: Shell: Z1 = Stainless steel/passivated. FT = Cold rolled steel/fused tin plate. Z16 = Stainless steel/nickel plated, dull finish Insulators: Glass bead/N.A. Contacts: Pins, Alloy 52/gold plated © 2009 Glenair, Inc. 4. Performance: DWV - 750 VAC Pin-to-Shell I.R. - 5,000 MegOhms Min @ 500 VDC Hermeticity <1 x 10-7 cc He/sec @ 1 atmosphere differential 5. Glenair 280-006 will mate with any QPL MIL-DTL-24308/1, /2 and /23 receptacle of the same size and arrangement. 6. All dimensions are typical for flange types “A” and “B”. “C” dim is not applicable to flange type “A”. 7. Metric dimensions (mm) are indicated in parentheses. CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com H-8 E-Mail: [email protected] 5B Glass-Sealed D-Subminiature Receptacle 1 E MOD CODES ed Leak Rate 2 3 1 2 3 4 5 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 11 12 13 6 7 8 9 9 10 11 12 13 14 15 14 15 16 17 18 19 20 21 22 23 24 25 15 CONTACTS 25 CONTACTS 9 CONTACTS s Helium per second 4 s Helium per second MIL-DTL 24308 280-006 MIL-DTL-24308/9 Hermetic e ticity Mod Code 5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 –585A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 33 18 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 37 CONTACTS s Helium per second HERMETIC LEAK RATE MOD CODES Designator Required Leak Rate 1 x 10-10 cc’s Helium per second –585B 1 x 10-9 cc’s Helium per second –585C 1 x 10-8 cc’s Helium per second 50 CONTACTS TABLE I: CONNECTOR DIMENSIONS TION CODES Shell Size ng Plus Outgassing1 cessing 2 Dim Dim Dim Dim Dim Dim Dim Dim Dim A B C D E F G H K ± .015 (± 0.4) ± .004 (± 0.1) ± .005 (± 0.1) ± .004 (± 0.1) ± .010 (± 0.3) ± .010 (± 0.3) ± .010 (± 0.3) ± .006 (± 0.2) ± .010 (± 0.3) 1.213 (30.8) .667 (16.9) .984 (25.0) .330 (8.4) .498 (12.6) .725 (18.4) .369 (9.4) .094 (2.4) .235 (6.0) 1.541 (39.2) .993 (25.2) 1.312 (33.3) .330 (8.4) .498 (12.6) .932 (23.7) .369 (9.4) .094 (2.4) .235 (6.0) Thermal vacuum3 Outgassing 4 2.088 (53.2) 1.535 (39.0) 1.852 (47.0) .330 (8.4) .498 (12.6) 1.497 (38.0) .369 (9.4) .103 (2.6) .230 (5.8) 2.729 (69.4) 2.183 (55.4) 2.500 (63.5) .330 (8.4) .498 (12.6) 2.125 (54.0) .369 (9.4) .103 (2.6) .230 (5.8) 5 2.635 (67.1) 2.079 (52.8) 2.406 (61.1) .441 (11.2) .610 (15.5) 2.000 (50.8) .500 (12.7) .103 (2.6) .230 (5.8) 24 hrs. 125° C. Mod 429C RECOMMENDED PANEL CUTOUT SEE TABLE 2 Mod 429A C Mod 186M XA Xa Ø.120 XB Xb Yb YB Ya YA R.062 Max Typ FRONT MOUNT (STYLE B ONLY) REAR MOUNT 10° Typ TABLE II: PANEL CUT-OUT Style A Dim Dim XA YA .745 (18.9) .385 (9.8) Dim XB .799 (20.0) 2 .950 (24.1) .385 (9.8) 3 1.495 (38.0) .385 (9.8) 4 2.145 (54.5) 5 2.015 (51.2) Shell Sizes 1 © 2009 Glenair, Inc. Style B Dim YB .462 (11.7) Dim C .984 (25.0) 1.125 (31.8) .462 (11.7) 1.312 (33.3) 1.690 (42.9) .482 (12.2) 1.852 (47.0) .385 (9.8) 2.335 (59.3) .482 (12.2) 2.500 (63.5) .520 (13.2) 2.231 (56.7) .588 (14.9) 2.406 (61.1) CAGE CODE 06324 H Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com H-9 E-Mail: [email protected]