39 390-010 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type C - Direct Coupling - Low Profile CONNECTOR DESIGNATORS * 390 F S 010 M 16 10 E 6 Product Series A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 6 DIRECT COUPLING TYPE C OVERALL SHIELD TERMINATION Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Connector Designator Strain Relief Style (C, E) Angle and Profile A = 90 B = 45 S = Straight Cable Entry (Tables X, XI) Shell Size (Table I) Basic Part No. Finish (Table II) Length * A Thread (Table I) .937 (23.8) Approx O-Rings * Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) B (Table I) STYLE 2 (STRAIGHT See Note 1) J (Table III) J (Table III) E (Table IV) B (Table I) F (Table IV) G (Table IV) B (Table I) H (Table IV) STYLE C Medium Duty (Table X) Clamping Bars T Cable Range © 2005 Glenair, Inc. STYLE E Medium Duty (Table XI) X (See Note 5) Y Cable Range W CAGE Code 06324 Z Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 39 - Page 36 39 390-010 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type C - Direct Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) Dash No. 03 04 06 08 10 12 16 20 24 28 32 Dash No. 03 04 06 08 10 12 16 20 24 28 32 T Max 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.281 (32.5) 1.281 (32.5) 1.406 (35.7) 1.656 (42.1) 1.906 (48.4) 1.906 (48.4) 2.000 (50.8) Y Max .739 (18.8) .739 (18.8) .739 (18.8) .739 (18.8) .791 (20.1) .880 (22.4) .901 (22.9) 1.031 (26.2) 1.250 (31.8) 1.250 (31.8) 1.312 (33.3) © 2005 Glenair, Inc. TABLE IV: ELBOW DIMENSIONS Elbow E G F Size Max Max Max 04 .630 (16.0) 2.715 (69.0) .636 (16.2) 06 .630 (16.0) 2.775 (70.5) .710 (18.0) 08 .692 (17.6) 2.835 (72.0) .731 (18.6) 10 .755 (19.2) 3.554 (90.3) .825 (21.0) 12 .848 (21.5) 3.664 (93.1) .988 (25.1) 16 1.036 (26.3) 3.854 (97.9) 1.087 (27.6) 20 1.130 (28.7) 4.192 (106.5) 1.325 (33.7) 24 1.255 (31.9) 4.225 (107.3) 1.337 (34.0) 28 1.317 (33.5) 4.325 (109.9) 1.827 (46.4) 32 1.348 (34.2) 4.465 (113.4) 2.027 (51.5) H Max 2.725 (69.2) 2.845 (72.3) 2.865 (72.8) 3.564 (90.5) 3.654 (92.8) 3.824 (97.1) 4.122 (104.7) 4.275 (108.6) 4.525 (114.9) 4.575 (116.2) TABLE X: CABLE ENTRY Cable Range W X Max Max Min Ref .812 (20.6) .219 (5.6) .156 (4.0) .135 (3.4) .937 (23.8) .312 (7.9) .188 (4.8) .203 (5.2) 1.062 (27.0) .438 (11.1) .281 (7.1) .285 (7.2) 1.188 (30.2) .531 (13.5) .312 (7.9) .350 (8.9) 1.312 (33.3) .625 (15.9) .375 (9.5) .390 (9.9) 1.562 (39.7) .750 (19.1) .500 (12.7) .460 (11.7) 1.750 (44.5) .938 (23.8) .625 (15.9) .510 (13.0) 2.250 (57.2) 1.250 (31.8) .938 (23.8) .695 (17.7) 2.375 (60.3) 1.375 (34.9) 1.000 (25.4) .715 (18.2) 2.625 (66.7) 1.625 (41.3) 1.250 (31.8) .915 (23.2) 2.812 (71.4) 1.875 (47.6) 1.500 (38.1) 1.070 (27.2) TABLE XI: CABLE ENTRY Cable Range Z Max Max Min .219 (5.6) .812 (20.6) .156 (4.0) .312 (7.9) .937 (23.8) .188 (4.8) .438 (11.1) 1.062 (27.0) .281 (7.1) .531 (13.5) 1.188 (30.2) .312 (7.9) .625 (15.9) 1.312 (33.3) .375 (9.5) .750 (19.1) 1.562 (39.7) .500 (12.7) .938 (23.8) 1.750 (44.5) .625 (15.9) 1.250 (31.8) 2.250 (57.2) .938 (23.8) 1.375 (34.9) 2.375 (60.3) 1.000 (25.4) 1.625 (41.3) 2.625 (66.7) 1.250 (31.8) 1.875 (47.6) 2.812 (71.4) 1.500 (38.1) CAGE Code 06324 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. Saddles are bottomed on Clamp Ears. 6. When using Connector Designator B refer to pages 18 and 19 for part number development. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 39 - Page 37