Tools MS3480 - Connector Wrench MIL-DTL-5015 and MIL-DTL-83723 Series II MS3480-28 Dash No. Basic Part No. 5.625 (142.9) Approx. B GLENAIR, INC. B C D A Thread .375 (9.5) Approx E TABLE I Shell Dash Size No. 8S 8 10S, 10SL 10 12, 12S 12 14, 14S 14 16, 16S 16 18 18 20 20 22 22 24 24 28 28 32 32 36 36 40 40 A Thread Class 2A 1/2 -28 UNEF 5/8 -24 UNEF 3/4 -20 UNEF 7/8 -20 UNEF 1 -20 UNEF 1 1/8 -18 UNEF 1 1/4 -18 UNEF 1 3/8 -18 UNEF 1 1/2 -18 UNEF 1 3/4 -18 UNS 2 -18 UNS 2 1/4 -16 UN 2 1/2 -16 UN B Dia. ± .060 (1.5) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.750 (69.9) 2.750 (69.9) 2.750 (69.9) 2.750 (69.9) C Approx. .718 (18.2) .718 (18.2) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) .921 (23.4) D Approx. .687 (17.4) .687 (17.4) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) E +0 - .015 (.4) .370 (9.4) .448 (11.4) .557 (14.1) .682 (17.3) .807 (20.5) .932 (23.7) 1.058 (26.9) 1.182 (30.0) 1.307 (33.2) 1.526 (38.8) 1.776 (45.1) 1.995 (50.7) 2.245 (57.0) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: Aluminum alloy with electroless nickel finish. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 60-2