39 390-003 Water-Tight EMI/RFI Cable Sealing Backshell with Strain Relief Type A - Rotatable Coupling - Low Profile 390 F S 003 M 16 10 E 6 CONNECTOR DESIGNATORS Product Series A-F-H-L-S Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Connector Designator ROTATABLE COUPLING Strain Relief Style (C, E) Angle and Profile A = 90° B = 45° S = Straight TYPE A OVERALL SHIELD TERMINATION Cable Entry (Tables X, XI) Shell Size (Table I) Basic Part No. Finish (Table II) Length ± .060 (1.52) Minimum Order Length 2.0 Inch (See Note 4) Length * O-Rings A Thread (Table I) * Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 4) C Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) E (Table III) .88 (22.4) Max G (Table III) F (Table III) H (Table III) STYLE 2 (45° & 90° See Note 1) STYLE C Medium Duty (Table X) Clamping Bars T Cable Range © 2005 Glenair, Inc. STYLE E Medium Duty (Table XI) X (See Note 6) Y Cable Range W CAGE Code 06324 Z Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 39 - Page 18 www.glenair.com 39 390-003 Water-Tight EMI/RFI Cable Sealing Backshell with Strain Relief Type A - Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. A-F-L-S H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 28 32 36 Dash No. 03 04 06 08 10 12 16 20 24 28 32 Dash No. 03 04 06 08 10 12 16 20 24 28 32 E Max .457 (11.6) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .926 (23.5) .926 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) 1.207 (30.7) 1.238 (31.4) T Max 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.281 (32.5) 1.281 (32.5) 1.406 (35.7) 1.656 (42.1) 1.906 (48.4) 1.906 (48.4) 2.000 (50.8) F Max 1.602 (40.7) 1.662 (42.2) 1.722 (43.7) 2.062 (52.4) 2.172 (55.2) 2.362 (60.0) 2.362 (60.0) 2.512 (63.8) 2.512 (63.8) 2.562 (65.1) 2.662 (67.6) 2.752 (69.9) G Max .500 (12.7) .595 (15.1) .610 (15.5) .700 (17.8) .885 (22.5) .975 (24.8) .975 (24.8) 1.125 (28.6) 1.125 (28.6) 1.225 (31.1) 1.575 (40.0) 1.775 (45.1) TABLE X: CABLE ENTRY Cable Range X W Ref Min Max Max .156 (4.0) .135 (3.4) .812 (20.6) .219 (5.6) .203 (5.2) .188 (4.8) .937 (23.8) .312 (7.9) .281 (7.1) .285 (7.2) 1.062 (27.0) .438 (11.1) .350 (8.9) .312 (7.9) 1.188 (30.2) .531 (13.5) .375 (9.5) .390 (9.9) 1.312 (33.3) .625 (15.9) .460 (11.7) .500 (12.7) 1.562 (39.7) .750 (19.1) .510 (13.0) .625 (15.9) 1.750 (44.5) .938 (23.8) .695 (17.7) .938 (23.8) 2.250 (57.2) 1.250 (31.8) 1.000 (25.4) .715 (18.2) 2.375 (60.3) 1.375 (34.9) .915 (23.2) 1.250 (31.8) 2.625 (66.7) 1.625 (41.3) 1.500 (38.1) 1.070 (27.2) 2.812 (71.4) 1.875 (47.6) TABLE XI: CABLE ENTRY Cable Range Y Z Max Max Max Min .219 (5.6) .739 (18.8) .812 (20.6) .156 (4.0) .312 (7.9) .739 (18.8) .937 (23.8) .188 (4.8) .438 (11.1) .739 (18.8) 1.062 (27.0) .281 (7.1) .531 (13.5) .739 (18.8) 1.188 (30.2) .312 (7.9) .625 (15.9) .791 (20.1) 1.312 (33.3) .375 (9.5) .750 (19.1) .880 (22.4) 1.562 (39.7) .500 (12.7) .938 (23.8) .901 (22.9) 1.750 (44.5) .625 (15.9) 1.250 (31.8) 1.031 (26.2) 2.250 (57.2) .938 (23.8) 1.375 (34.9) 1.250 (31.8) 2.375 (60.3) 1.000 (25.4) 1.625 (41.3) 1.250 (31.8) 2.625 (66.7) 1.250 (31.8) 1.875 (47.6) 1.312 (33.3) 2.812 (71.4) 1.500 (38.1) © 2005 Glenair, Inc. H Max 1.612 (40.9) 1.732 (44.0) 1.752 (44.5) 2.072 (52.6) 2.162 (54.9) 2.332 (59.2) 2.332 (59.2) 2.442 (62.0) 2.442 (62.0) 2.612 (66.3) 2.862 (72.7) 2.862 (72.7) CAGE Code 06324 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. Interface O-Ring not supplied with connector designator A. 6. Saddles are bottomed on Clamp Ears. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 39 - Page 19 www.glenair.com