ARINC Series 400 (Cannon) 527-015 Solid Strain-Relief Backshell for Cannon DL2-96 Series Connectors 527-015 M 01 Basic Part No. Finish Symbol (Table II) Dash No. (Table I) 2.82 (71.6) Max 4.88 (124.0) Max Ref. 2.719 (69.1) Max Cable Range 1.625 (41.3) .969 (24.6) 1.125 (28.6) Backshell ID A B Plug (Shown for Ref.) Receptacle (Shown for Ref.) C .020 (.5) RFI/EMI Gasket 1.375 (34.9) Max Front Mount (Dash 01 & 02) .765 (19.4) .761 (19.3) .125 (3.2) Panel Ref. Rear Mount (Dash 03) #4-40 UNC Screw (4 Places) 2.282 (58.0) 2.278 (57.9) 2.875 (73.0) Max © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] G-8 ARINC Series 400 (Cannon) 527-015 Solid Strain-Relief Backshell for Cannon DL2-96 Series Connectors TABLE I: BACKSHELL DIMENSIONS & CONTACT STYLE Dash No. Connector/Contact Style 01 Front Mount/Crimp 02 Front Mount/Wire Wrap 03 Rear Mount/Crimp A Max Ref. 4.72 (119.9) 5.06 (128.5) 4.38 (111.3) B C Max Max 2.72 (69.1) .845 (21.5) 3.05 (77.5) 1.165 (29.6) 2.35 (59.7) .470 (11.9) TABLE II - FINISH OPTIONS Symbol B J M N NF T Finish Cadmium Plate, Olive Drab Iridite, Gold Over Cadmium Plate over Nickel Electroless Nickel Cadmium Plate, Olive Drab, Over Nickel Cadmium Plate, Olive Drab, Over Electroless Nickel (500 Hour Salt Spray) Cadmium Plate, Bright Dip Over Nickel (500 Hour Salt Spray) CONSULT FACTORY FOR OTHER AVAILABLE FINISHES 1. Metric dimensions (mm) are indicated in parentheses. 2. Bond RFI/EMI gasket to panel with conductive adhesive (Installed thickness not to exceed .045 (1.1)). 3. Material/Finish: Backshell, Adapter, Ferrules, and Clamp = Al Alloy/Table II Hardware = SST/Passivate Gasket = Metex/N.A. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] G-9