Conduit & Accessories M24758/12 Adapter for MIL-DTL-26482 Series I Connectors M24758/12-16-01-01-A Basic Part No. Material Designator: A = Aluminum B = Brass C = CRES 316 Conduit Size Code (See Table I) A-Thread Code (See Table II) .188 (4.8) A Thread D Dia Style Designator .188 (4.8) J .063 (1.6) Min .125 (3.2) L L A Thread E Dia K Dia D Dia K N Dia Dia E Dia C Thread .50 (12.7) Str. Knurl (Medium Coarse) .25 (6.4) C Thread Str. Knurl (Medium Coarse) STYLE 01 FOR USE WHEN E DIAMETER IS GREATER THAN K DIAMETER STYLE 03 FOR USE WHEN E DIAMETER IS EQUAL TO OR LESS THAN K DIAMETER STYLE 02 SAME AS STYLE 01 EXCEPT J DIMENSION IS ZERO 1. The M24758/12 adapter couples MIL-DTL-26482 Series I connectors (MS3110, MS3111, or MS3116 series) to M24758/2, M24758/3 or M24758/4 fittings. 2. For MIL-DTL-26482 series 2, the M24758/13 adapter may be used. 3. Metric dimensions (mm) are indicated in parentheses. 4. For complete dimensions see applicable Military Specification. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 71-18 www.glenair.com E-Mail: [email protected] Conduit & Accessories M24758/12 Adapter for MIL-DTL-26482 Series I Connectors TABLE I Conduit Size Code 02 03 04 05 06 08 10 12 16 20 24 C Thread (Class 2A) 0.438 - 28 UNEF 0.563 - 24 UNEF 0.688 - 24 UNEF 0.813 - 20 UNEF 0.938 - 20 UNEF 1.250 - 18 UNEF 1.563 - 18 UNEF 1.875 - 16 UN 2.375 - 16 UN 2.875 - 16 UN 3.375 - 16 UN L ±.02 .210 .250 .250 .310 .310 .370 .370 .430 .430 .430 .430 (.5) (5.3) (6.4) (6.4) (7.9) (7.9) (9.4) (9.4) (10.9) (10.9) (10.9) (10.9) K Dia Min. .250 (6.4) .370 (9.4) .500 (12.7) .620 (15.7) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) N Dia ±.02 (.5) .687 (17.4) .812 (20.6) .937 (23.8) 1.062 (27.0) 1.187 (30.1) 1.500 (38.1) 1.812 (46.0) 2.125 (54.0) 2.625 (66.7) 3.125 (79.4) 3.625 (92.1) TABLE II (A Thread Code and Adapter Dimensions) A Connector Thread Shell Code Size 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 © 2005 Glenair, Inc. A Thread (Class 2B) 0.438 - 28 UNEF 0.563 - 24 UNEF 0.688 - 24 UNEF 0.813 - 20 UNEF 0.938 - 20 UNEF 1.063 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF D Dia ±.02 (.5) .590 (15.0) .710 (18.0) .840 (21.3) .960 (24.4) 1.090 (27.7) 1.210 (30.7) 1.340 (34.0) 1.460 (37.1) 1.590 (40.4) CAGE Code 06324 E Dia ±.02 (.5) .340 (8.6) .450 (11.4) .570 (14.5) .680 (17.3) .810 (20.6) .930 (23.6) 1.060 (26.9) 1.180 (30.0) 1.310 (33.3) J Style 01 ±.02 (.5) .870 (22.1) .870 (22.1) .870 (22.1) .870 (22.1) .870 (22.1) 1.060 (26.9) 1.180 (30.0) 1.620 (41.1) 1.680 (42.7) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 71-19 www.glenair.com E-Mail: [email protected]