MIL-PRF 24758A MIL-PRF-24758-26 Adapter for Panel Termination M24758 - 26 C 32 Basic No. Panel Fitting Thread Size Code (Table II) Conduit Size Code (Table I) .690 (17.5) .188 (4.8) O-Ring B .250 (6.4) Max Panel L Panel Mounting Hole A Thread K Washer A thread Jam Nut C Thread NOTE: C Thread must not exceed A Thread. For example, avoid making a faulty part number such as M245758-26C28 D Flats APPLICATION NOTES 1. Assembly identified with manufacurer’s code identification number (Glenair, part number and classification code 490). 4. Material / Finish: Adapter, coupling nut, 316 / electroless nickel, matte finish 2. The M24758-26 adapter provides the capability of terminating a M24758-2, M24758-3 or M24758-4 fitting to a panel. 5. Metric dimensions (mm) are indicated in parentheses. 6. See M24758-2, -3, -4 torque values for C thread. 3. Configuration of adapter may change based on the variance of diameters E and K. © 2008 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] 52 www.glenair.com MIL-PRF 24758A MIL-PRF-24758-26 Adapter for Panel Termination TABLE I CONDUIT SIZE CODE C CLASS - 2A THREAD L +.03 (0.8) -.00 K DIA MIN A .438-28 UNEF .21 (5.25) .245 (6.22) B .688-24 UNEF .25 (6.35) .495 (12.57) C .938-20 UNEF .31 (7.87) .745 (18.92) D 1.250-18 UNEF .37 (9.40) .995 (25.27) E 1.563-18 UNEF .37 (9.40) 1.245 (31.62) F 1.875-16 UN .43 (10.92) 1.495 (37.97) G 2.375-16 UN .43 (10.92) 1.995 (50.67) H 2.875-16 UN .43 (10.92) 2.495 (63.37) J .563-24 UNEF .25 (6.35) .370 (9.40) K .813-20 UNEF .31 (7.87) .620 (15.75) L 3.375-16 UN .43 (10.92) 2.995 (76.07) TABLE Il DASH NO © 2008 Glenair, Inc. A CLASS - 2A THREAD B +.03 (0.8) -.00 D FLATS MAX SIZE CODE (TABLE I) 20 5/8-24 UNEF .630 (16.0) .875 (22.2) A 24 3/4-20 UNEF .750 (19.1) 1.000 (25.4) B 28 7/8-20 UNEF .880 (22.4) 1.125 (28.6) B 32 1-20 UNEF 1.000 (25.4) 1.250 (31.8) C 36 1 1/8-18 UNEF 1.130 (28.7) 1.375 (34.9) C 40 1 1/4-18 UNEF 1.250 (31.8) 1.500 (38.1) D 42 1 5/16-18 UNEF 1.310 (33.3) 1.625 (41.3) D 48 1 1/2-18 UNEF 1.500 (38.1) 1.750 (44.5) D 56 1 3/4-16 UN 1.750 (55.5) 2.000 (50.8) E 64 2-16 UN 2.000 (50.8) 2.250 (57.2) F CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] 53 www.glenair.com