37 370-008 Water-Tight Cable Sealing Backshell with Strain Relief Standard Profile - Rotatable Coupling 370 G S 008 M 17 10 C 6 Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Product Series CONNECTOR DESIGNATOR Connector Designator Strain Relief Style (C, E) G Angle and Profile A = 90° B = 45° S = Straight ROTATABLE COUPLING Cable Entry (Tables IV, V) Shell Size (Table I) Finish (Table II) Basic Part No. Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 5) Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 5) A Thread (Table I) C Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) G (Table III) E (Table III) Length ± .060 (1.52) 1.25 (31.8) Max F (Table III) H (Table III) STYLE 2 (45° & 90° See Note 1) STYLE C Medium Duty (Table IV) Clamping Bars J Cable Range © 2005 Glenair, Inc. STYLE E Medium Duty (Table V) L (See Note 3) M Cable K CAGE Code 06324 N Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 37 - Page 16 www.glenair.com 37 370-008 Water-Tight Cable Sealing Backshell with Strain Relief Standard Profile - Rotatable Coupling See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. Shell Size 11 13 15 17 19 23 25 29 33 TABLE III: ELBOW DIMENSIONS E G F Max Max Max 1.240 (31.5) .920 (23.4) 1.380 (35.1) 1.260 (32.0) .940 (23.9) 1.440 (36.6) 1.290 (32.8) .970 (24.6) 1.500 (38.1) 1.310 (33.3) .990 (25.1) 1.570 (39.9) 1.340 (34.0) 1.020 (25.9) 1.630 (41.4) 1.380 (35.1) 1.060 (26.9) 1.730 (43.9) 1.410 (35.8) 1.090 (27.7) 1.800 (45.7) 1.580 (40.1) 1.260 (32.0) 2.040 (51.8) 1.620 (41.1) 1.300 (33.0) 2.130 (54.1) Dash No. 03 04 06 08 10 12 16 20 24 28 32 Dash No. 03 04 06 08 10 12 16 20 24 28 32 J Max 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.281 (32.5) 1.281 (32.5) 1.406 (35.7) 1.656 (42.1) 1.906 (48.4) 1.906 (48.4) 2.000 (50.8) M Max .739 (18.8) .739 (18.8) .739 (18.8) .739 (18.8) .791 (20.1) .880 (22.4) .901 (22.9) 1.031 (26.2) 1.250 (31.8) 1.250 (31.8) 1.312 (33.3) H Max 1.060 (26.9) 1.120 (28.4) 1.190 (30.2) 1.250 (31.8) 1.330 (33.8) 1.410 (35.8) 1.480 (37.6) 1.720 (43.7) 1.810 (46.0) TABLE II: STANDARD FINISHES GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options TABLE IV: CABLE ENTRY Cable Range K L Max Ref Min Max .812 (20.6) .135 (3.4) .156 (4.0) .219 (5.6) .937 (23.8) .203 (5.2) .188 (4.8) .312 (7.9) 1.062 (27.0) .285 (7.2) .281 (7.1) .438 (11.1) 1.188 (30.2) .350 (8.9) .312 (7.9) .531 (13.5) 1.312 (33.3) .390 (9.9) .375 (9.5) .625 (15.9) 1.562 (39.7) .460 (11.7) .500 (12.7) .750 (19.1) 1.750 (44.5) .510 (13.0) .625 (15.9) .938 (23.8) 2.250 (57.2) .695 (17.7) .938 (23.8) 1.250 (31.8) 2.375 (60.3) .715 (18.2) 1.000 (25.4) 1.375 (34.9) 2.625 (66.7) .915 (23.2) 1.250 (31.8) 1.625 (41.3) 2.812 (71.4) 1.070 (27.2) 1.500 (38.1) 1.875 (47.6) TABLE V: CABLE ENTRY Cable Range N Max Min Max .812 (20.6) .156 (4.0) .219 (5.6) .937 (23.8) .188 (4.8) .312 (7.9) 1.062 (27.0) .281 (7.1) .438 (11.1) 1.188 (30.2) .312 (7.9) .531 (13.5) 1.312 (33.3) .375 (9.5) .625 (15.9) 1.562 (39.7) .500 (12.7) .750 (19.1) 1.750 (44.5) .625 (15.9) .938 (23.8) 2.250 (57.2) .938 (23.8) 1.250 (31.8) 2.375 (60.3) 1.000 (25.4) 1.375 (34.9) 2.625 (66.7) 1.250 (31.8) 1.625 (41.3) 2.812 (71.4) 1.500 (38.1) 1.875 (47.6) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G & H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Saddles are bottomed on Clamp Ears. 4. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 5. Consult factory for shorter lengths on straight backshells. Add “-445” to Specify Glenair’s Non-Detent, ("NESTOR") Spring-Loaded, Self-Locking Coupling. See Page 41 for Details. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 37 - Page 17 www.glenair.com