319 319-044 EMI/RFI Shield Sock Shrink Boot Adapter with Optional Shrink Boot Standard Profile - Self Locking - Rotatable Coupling 319 F J 044 M 16 06-6-4 T CONNECTOR DESIGNATORS Product Series Shrink Boot (Table IV - Omit for None) A-F-H-L-S Connector Designator SELF-LOCKING ROTATABLE COUPLING Length: S only (1/2 inch increments: e.g. 4 = 2 inches) Angle and Profile J = 90° H = 45° S = Straight Shield Length (1 inch increments: Minimum 6 inches) Cable Entry (Table IV) Basic Part No. Shell Size (Table I) Finish (Table II) A Thread (Table I) Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 6) Length * O-Ring * Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 6) E Typ. (Table I) STYLE 2 (STRAIGHT See Note 5) Cable Entry Anti-Rotation Device (Typ.) Single Layer Shield Typ. (Tinned Copper) H F (Table III) (Table III) G (Table III) 1.00 (25.4) Max J (Table III) .140/.130 (3.6/3.3) Typ. Shield Length (Approx.) STYLE 2 (45° & 90° See Note 5) © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 319 - Page 10 319 319-044 EMI/RFI Shield Sock Shrink Boot Adapter with Optional Shrink Boot Standard Profile - Self Locking - Rotatable Coupling See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: DIMENSIONS Shell Size Conn. Desig. A-F-L-S H 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 F Max .986 (25.0) 1.016 (25.8) 1.038 (26.4) 1.056 (26.8) 1.066 (27.1) 1.106 (28.1) 1.136 (28.9) 1.156 (29.4) 1.186 (30.1) G Max 1.045 (26.5) 1.075 (27.3) 1.097 (27.9) 1.125 (28.6) 1.145 (29.1) 1.165 (29.6) 1.195 (30.4) 1.215 (30.9) 1.245 (31.6) H Max 1.096 (27.8) 1.166 (29.6) 1.226 (31.1) 1.286 (32.7) 1.346 (34.2) 1.396 (35.5) 1.466 (37.2) 1.516 (38.5) 1.586 (40.3) TABLE II: STANDARD FINISHES GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Back Cover for Complete Finish Information and Additional Finish Options 1. Cable Entry is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 2. See Shrink Boot Reference Information (page 40). 3. Metric dimensions (mm) are indicated in parentheses. 4. O-Ring not supplied with Connector Designator A. 5. When maximum entry (page 21) is exceeded, Style 2 will be supplied. Dimensions F, G, H & J will not apply. Please consult factory. 6. Consult factory for shorter lengths on straight backshells. © 2005 Glenair, Inc. CAGE Code 06324 J Max 1.155 (29.3) 1.225 (31.1) 1.285 (32.6) 1.345 (34.2) 1.405 (35.7) 1.455 (37.0) 1.525 (38.7) 1.575 (40.0) 1.645 (41.8) TABLE IV: CABLE ENTRY/SHRINK BOOT Shrink Dash Cable Boot * No. Entry n/a 01 .188 (4.8) n/a 02 .250 (6.4) 202K121-25-0 03 .312 (7.9) 202K121-25-0 04 .375 (9.5) 202K121-25-0 05 .438 (11.1) 202K132-25-0 06 .500 (12.7) 202K132-25-0 07 .562 (14.3) 202K132-25-0 08 .625 (15.9) 202K142-25-0 09 .688 (17.5) 202K142-25-0 10 .750 (19.1) 202K142-25-0 11 .812 (20.6) 202K1532-25-0 12 .875 (22.2) 13 202K153-25-0 .938 (23.8) 202K153-25-0 14 1.000 (25.4) 15 202K163-25-0 1.250 (31.8) 202K174-25-0 16 1.500 (38.1) 17 n/a 1.750 (44.5) 18 n/a 2.000 (50.8) 19 n/a 1.125 (28.6) 20 n/a 1.375 (34.9) 21 n/a 1.625 (41.3) 22 n/a 1.062 (27.0) 23 n/a 1.188 (30.2) 24 n/a 1.875 (47.6) * Raychem Shrink Boot Supplied with "T" Option (see Part Number Development) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 319 - Page 11