5015 Type Connectors 257-005 Connector Receptacle Assembly Stainless Steel Harsh Environment With Printed Circuit Contacts 257 - 005 H 2 - 14S - 5 P W M M = Molding Adapter (Omit for None) Product Series Basic Number Alternate Insert Position, See Page 28 (Omit for Normal) H = Hermetic (Omit for Standard, substitute dash) 2 = Receptacle Assembly Contact Style; P = Pin S = Socket (Non-Hermetic Only) Shell Size (Table I) Insert Arrangement Dash No., See Page 28 .170 (4.3) (See Note 3) E .500 (12.7) Max panel .065/.060 (1.7/1.5) Dia (See Note 3) A Thread B Dia .450 (11.4) Polarizing Key RECOMMENDED PANEL CUT-OUT F 1.820 (46.2) Max D C Insert Arrangement with Solder Pot Contacts (Page 28) TABLE I Shell Size 10SL 12 14S 18 20 24 28 A Thread Class 2A 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 1/8 - 18 UNEF 1 1/4 - 18 UNEF 1 1/2 - 18 UNEF 1 3/4 - 18 UNEF B Dia Max 1.030 (26.2) 1.160 (29.5) 1.280 (32.5) 1.660 (42.2) 1.780 (45.2) 2.030 (51.6) 2.280 (57.9) C Dia + .010 (0.3) -.000 (0) .653 (16.6) .760 (19.3) .885 (22.5) 1.135 (28.8) 1.260 (32.0) 1.510 (38.4) 1.760 (44.7) D + .010 (0.3) -.000 (0) .585 (14.9) .710 (18.0) .835 (21.2) 1.085 (27.6) 1.210 (30.7) 1.460 (37.1) 1.710 (43.4) E Flats .870 (22.1) .995 (25.3) 1.120 (28.4) 1.495 (38.0) 1.620 (41.1) 1.870 (47.5) 2.120 (53.8) F Ref 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.730 (43.9) 1.870 (47.5) 2.165 (55.0) 2.448 (62.2) 1. Metric dimensions (mm) are indicated in parentheses. 2. Electrical safety limits must be established by the user. Peak voltages, switching surges, etc., should be used to determine the safety of the application. 3. Applies to size 16 contacts only. Consult factory for other sizes. © 2003 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 32