IPT SE Series Bayonet Lock Connectors IPT 06 SE...SR Straight Plug Connector with Backshell, Cable Clamp and Bushing IPT G 06 SE 18-11 S Z SR XX MIL-C-26482 Series l Type Mod Code Options See Table II Grounding Finger (Omit for Standard) Cable Clamp and Bushing Alternate Insert Rotation (W, X, Y, Z) Omit for Normal 06 - Straight Plug Contact Gender P - Pin S - Socket Connector Class SE - Crimp Contact/Environmental Shell Size and Insert Arrangements 3 Max. D3 H L D1 APPLICATION NOTES 1. Straight plug with cable clamp and bushing for cable protection. 2. Connector Class “SE” (crimp contact/environmental)––Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber. © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] A-24 www.glenair.com IPT SE Series Bayonet Lock Connectors IPT 06 SE...SR Straight Plug Connector with Backshell, Cable Clamp and Bushing TABLE I: DIMENSIONS Shell size D3 + 0.3 - 0.7 D1 Max. H Max. L Max. Maximum Weight in Grams 8 19.8 3.2 21.1 61.3 22 10 23.5 4.8 22.7 61.3 24 12 26.5 7.9 25.9 61.3 30 14 30.0 9.5 29.0 61.3 40 16 33.1 12.7 30.6 64.3 47 18 35.3 15.9 37.4 64.3 62 20 38.8 15.9 37.4 70.0 79 22 42.0 19.1 42.1 70.0 97 24 45.1 20.3 44.5 71.9 104 TABLE II: MODIFICATION CODES Shell Finish (Omit for Standard Cad/Olive Drab Finish) Assembly with Accessories (Omit for Standard Version) F2 - Bright Nickel Plating (RoHs) Key Polarization (Omit for N version) W, X, Y, Z = Alternates F6 - Black Electrodeposited Paint (RoHs) N0 - Connector Less Backshell F7 - Black Zn-Co Plating (RoHs) GXXX - Custom Designed Connector F8 - Olive Drab Zn-Co Plating STANDARD FINISHES (For QQ-A-591 Aluminum Shells) Requirements IAW RoHS Not IAW RoHS G3 Cadmium with Olive F8 Zinc Cobalt with F2 Electrolytic Nickel F6 Black Non Conductive F7 Black Conductive Drab Passivation Olive Drab Passivation Thermal Shock Salt Spray After Thermal Shock Electical Conductivity -40°C + 100°C -55°C + 125°C -55°C + 125°C -55°C + 125°C -40°C + 100°C 24 hour 500 hour 500 hour 500 hour 200 hour Very Good NO Very Good Very Good Good Abrasion Resistance Very Good Very Good Good Very Good Good © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] A-25 www.glenair.com