LITTELFUSE V111HF34

Varistor Products
Industrial High Energy Terninal Varistors > HB34, HF34 & HG34 Series
RoHS
HB34, HF34 and HG34 Varistor Series
Description
The HB34, HF34, and HG34 Series of transient surge
suppressors are industrial high-energy Metal-Oxide
Varistors (MOVs). They are designed to provide surge
suppression in the AC mains outdoor and service entrance
environment (distribution panels) of buildings. Applications
also include industrial heavy motors, controls, and power
supplies such as used in the oil-drilling, mining, and
transportation fields, including HVAC and motor/generator
applications.
The HB34 Series provides rigid terminals for throughhole solder mounting on printed circuit boards, thereby
eliminating the need for screw mounting. The HF34
Series has the same rigid through-hole terminals as the
HB34 with the addition of mounting holes for bolt-down
mounting and longer terminals to allow for additional
mounting flexibility. The HG34 has formed feet with
mounting holes for vertical bolt-down mounting.
Agency Approvals
Agency
Agency File Number
E320116
-3
See Ratings and Specifications table for part numbers.
t -FBE'SFF)BMPHFO
Free and RoHS
Compliant available
t )JHIQFBLQVMTF
current capability
ITM = 40,000A
t 8JEFPQFSBUJOH
voltage range
VM(AC)RMS 110V to 750V
t 3JHJEUFSNJOBMTGPS
secure through-hole
solder mounting
t )JHIFOFSHZBCTPSQUJPO
capability
8TM = 220J to 1050J
t /PEFSBUJOHVQUP
85ºC ambient
Absolute Maximum Ratings
t'PSSBUJOHTPGJOEJWJEVBMNFNCFSTPGBTFSJFTTFF%FWJDF3BUJOHTBOE4QFDJmDBUJPOTDIBSU
Continuous
Steady State Applied Voltage:
Hx34 Series
Units
AC Voltage Range (VM(AC)RMS)
110 to 750
V
%$7PMUBHF3BOHF7.%$
)
UP
V
40000
A
Transients:
1FBL1VMTF$VSSFOU*TM)
For 8/20μT$VSSFOU8BWF4FF'JHVSF
Single Pulse Energy Range
220 to 1050
J
Operating Ambient Temperature Range (TA)
-55 to +85
ºC
Storage Temperature Range (TSTG)
'PSNT$VSSFOU8BWF8TM)
-55 to +125
ºC
Temperature Coefficient (aV) of Clamping Voltage (VC) at Specified Test Current
<0.01
%/ºC
)J1PU&ODBQTVMBUJPO$0"5*/(*TPMBUJPO7PMUBHF$BQBCJMJUZ
2500
V
1000
MΩ
%JFMFDUSJDNVTUXJUITUBOEJOEJDBUFE%$WPMUBHFGPSPOFNJOVUFQFS.*-45%.FUIPE
$0"5*/(*OTVMBUJPO3FTJTUBODF
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This
is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied.
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/hb34.html or /hf34 or /hg34.thml
for current information.
HB34, HF34 and HG34 Varistor Series
Revision: February 21, 2011
HBx/HFx/HGx
HI–ENERGY MOV’S
Series
Features
Varistor Products
Industrial High Energy Terminal Varistors > HB34, HF34 & HG34 Series
HB34 Series Ratings & Specifications
Maximum Rating (85°C)
Lead–free
Model
and RoHS
Size
Compliant Models
Disc
Dia.
(mm)
Part Number
Continuous
Specifications (25°C)
Transient
VRMS
V%$
Energy
(2ms)
VM(AC)
V.%$
WTM
Peak
Current
8 x 20μs
ITM
Varistor Voltage at 1mA
DC Test Current
Min
V/%$
Max
Maximum
Clamping Voltage
VC at 200A
Current (8/20μs)
Typical
Capacitance
VC
f = 1MHz
(V)
(V)
(J)
(A)
(V)
(V)
(V)
(V)
(pF)
V111HB34
34
110
148
220
40,0001
156
173
288
11,600
V131HB34
34
130
175
270
40,0002
184
200
228
345
10,000
3
220
248
375
V141HB34
34
140
188
40,000
4
V151HB34
34
150
200
300
40,000
212
240
268
405
8,000
V181HB34
34
180
240
330
40,000
254
282
310
468
6,800
V201HB34
34
200
265
350
40,000
283
314
345
533
6,350
V251HB34
34
250
330
370
40,000
354
650
5,000
V271HB34
34
275
370
400
40,000
430
473
730
4,500
V301HB34
34
300
410
430
40,000
433
478
526
780
4,100
V321HB34
34
320
420
460
40,000
462
510
561
830
3,800
V331HB34
34
330
435
475
40,000
467
570
843
3,750
V351HB34
34
350
460
500
40,000
550
604
3,600
7)#
34
385
510
550
40,000
545
604
663
1000
3,500
V421HB34
34
420
560
600
40,000
610
680
748
1,130
3,000
V441HB34
34
440
587
620
40,000
622
1,150
V481HB34
34
480
640
650
40,000
670
750
825
1,240
2,700
V511HB34
34
510
675
700
40,000
735
820
1,350
2,500
V551HB34
34
550
710
755
40,000
778
864
1,404
V571HB34
34
570
730
770
40,000
805
1000
1,480
2,200
V661HB34
34
660
850
40,000
1050
1160
1,720
2,000
V681HB34
34
680
875
40,000
1068
1173
1,777
V751HB34
34
750
1050
40,000
1080
1200
1320
2,000
1,800
/05&"WFSBHFQPXFSEJTTJQBUJPOPGUSBOTJFOUTOPUUPFYDFFE8
1FBLDVSSFOUBQQMJFTUPBQQMJDBUJPOTSBUFEVQUP7RMS1FBLDVSSFOUJTL"GPSBQQMJDBUJPOTHSFBUFSUIBO7
1FBLDVSSFOUBQQMJFTUPBQQMJDBUJPOTSBUFEVQUP7RMS1FBLDVSSFOUJTL"GPSBQQMJDBUJPOTHSFBUFSUIBO7
1FBLDVSSFOUBQQMJFTUPBQQMJDBUJPOTSBUFEVQUP7RMS1FBLDVSSFOUJTL"GPSBQQMJDBUJPOTHSFBUFSUIBO7
1FBLDVSSFOUBQQMJFTUPBQQMJDBUJPOTSBUFEVQUP7RMS1FBLDVSSFOUJTL"GPSBQQMJDBUJPOTHSFBUFSUIBO7
©2011 Littelfuse, Inc.
HB34, HF34 and HG34 Varistor Series
Revision: February 21, 2011
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/hb34 or /hf34 or /hg34.html
for current information.
Varistor Products
Industrial High Energy Terninal Varistors > HB34, HF34 & HG34 Series
HF34 Series Ratings & Specifications
Continuous
Specifications (25°C)
Transient
VRMS
V%$
Energy
(2ms)
VM(AC)
V.%$
WTM
Peak
Current
8 x 20 μs
ITM
Varistor Voltage at 1mA
DC Test Current
Min
V/%$
Max
Maximum
Clamping Voltage
VC at 200A
Current (8/20μs)
Typical
Capacitance
VC
f = 1MHz
(V)
(V)
(J)
(A)
(V)
(V)
(V)
(V)
(pF)
V111HF34
34
110
148
220
40,0001
156
173
288
11,600
V131HF34
34
130
175
270
40,0002
184
200
228
345
10,000
3
220
248
375
V141HF34
34
140
188
40,000
4
V151HF34
34
150
200
300
40,000
212
240
268
405
8,000
V181HF34
34
180
240
330
40,000
254
282
310
468
6,800
V201HF34
34
200
265
350
40,000
283
314
345
533
6,350
V251HF34
34
250
330
370
40,000
354
650
5,000
V271HF34
34
275
370
400
40,000
430
473
730
4,500
V301HF34
34
300
410
430
40,000
433
478
526
780
4,100
V321HF34
34
320
420
460
40,000
462
510
561
830
3,800
V331HF34
34
330
435
475
40,000
467
570
843
3,750
V351HF34
34
350
460
500
40,000
550
604
3,600
7)'
34
385
510
550
40,000
545
604
663
1,000
3,500
V421HF34
34
420
560
600
40,000
610
680
748
1,130
3,000
V441HF34
34
440
587
620
40,000
622
1,150
V481HF34
34
480
640
650
40,000
670
750
825
1,240
2,700
V511HF34
34
510
675
700
40,000
735
820
1,350
2,500
V551HF34
34
550
710
755
40,000
778
864
1,404
V571HF34
34
570
730
770
40,000
805
1000
1,480
2,200
V661HF34
34
660
850
40,000
1050
1160
1,720
2,000
V681HF34
34
680
875
40,000
1068
1173
1777
V751HF34
34
750
1050
40,000
1080
1200
1320
2,000
1,800
/PUF
1FBLDVSSFOUBQQMJFTUPBQQMJDBUJPOTSBUFEVQUP7RMS1FBLDVSSFOUJTL"GPSBQQMJDBUJPOTHSFBUFSUIBO7
1FBLDVSSFOUBQQMJFTUPBQQMJDBUJPOTSBUFEVQUP7RMS1FBLDVSSFOUJTL"GPSBQQMJDBUJPOTHSFBUFSUIBO7
1FBLDVSSFOUBQQMJFTUPBQQMJDBUJPOTSBUFEVQUP7RMS1FBLDVSSFOUJTL"GPSBQQMJDBUJPOTHSFBUFSUIBO7
1FBLDVSSFOUBQQMJFTUPBQQMJDBUJPOTSBUFEVQUP7RMS1FBLDVSSFOUJTL"GPSBQQMJDBUJPOTHSFBUFSUIBO7
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/hb34.html or /hf34 or /hg34.thml
for current information.
HB34, HF34 and HG34 Varistor Series
Revision: February 21, 2011
HBx/HFx/HGx
HI–ENERGY MOV’S
Series
Maximum Rating (85°C)
Lead–free
Model
and RoHS
Size
Compliant Models
Disc
Dia.
(mm)
Part Number
Varistor Products
Industrial High Energy Terminal Varistors > HB34, HF34 & HG34 Series
HG34 Series Ratings & Specifications
Maximum Rating (85°C)
Lead–free
Model
and RoHS
Size
Compliant Models
Disc
Dia.
(mm)
Part Number
Continuous
Specifications (25°C)
Transient
Peak
Current
8 x 20 μs
Varistor Voltage at 1mA
DC Test Current
Maximum
Clamping Voltage
VC at 200A
Current (8/20μs)
Typical
Capacitance
f = 1MHz
VRMS
V%$
Energy
(2ms)
VM(AC)
V.%$
WTM
ITM
Min
V/%$
Max
VC
(V)
(V)
(J)
(A)
(V)
(V)
(V)
(V)
(pF)
V111HG34
34
110
148
220
40,0001
156
173
288
11,600
V131HG34
34
140
175
270
40,0002
184
200
228
345
10,000
V141HG34
34
130
188
40,0003
220
248
375
4
V151HG34
34
150
200
300
40,000
212
240
268
405
8,000
V181HG34
34
180
240
330
40,000
254
282
310
468
6,800
V201HG34
34
200
265
350
40,000
283
314
345
533
6,350
V251HG34
34
250
330
370
40,000
354
650
5,000
V271HG34
34
275
370
400
40,000
430
473
730
4,500
V301HG34
34
300
410
430
40,000
433
478
526
780
4,100
V321HG34
34
320
420
460
40,000
462
510
561
830
3,800
V331HG34
34
330
435
475
40,000
467
570
843
3,750
V351HG34
34
350
460
500
40,000
550
604
3,600
V331HG34
34
385
510
550
40,000
545
604
663
1,000
3,500
V421HG34
34
420
560
600
40,000
610
680
748
1,130
3,000
V441HG34
34
440
587
620
40,000
622
1,150
V481HG34
34
480
640
650
40,000
670
750
825
1,240
2,700
V511HG34
34
510
675
700
40,000
735
820
1,350
2,500
V551HG34
34
550
710
755
40,000
778
864
1,404
V571HG34
34
570
730
770
40,000
805
1000
1,480
2,200
V661HG34
34
660
850
40,000
1050
1160
1,720
2,000
V681HG34
34
680
875
40,000
1068
1173
1,777
V751HG34
34
750
1050
40,000
1080
1200
1320
2,000
1,800
/PUF
1FBLDVSSFOUBQQMJFTUPBQQMJDBUJPOTSBUFEVQUP7RMS1FBLDVSSFOUJTL"GPSBQQMJDBUJPOTHSFBUFSUIBO7
1FBLDVSSFOUBQQMJFTUPBQQMJDBUJPOTSBUFEVQUP7RMS1FBLDVSSFOUJTL"GPSBQQMJDBUJPOTHSFBUFSUIBO7
1FBLDVSSFOUBQQMJFTUPBQQMJDBUJPOTSBUFEVQUP7RMS1FBLDVSSFOUJTL"GPSBQQMJDBUJPOTHSFBUFSUIBO7
1FBLDVSSFOUBQQMJFTUPBQQMJDBUJPOTSBUFEVQUP7RMS1FBLDVSSFOUJTL"GPSBQQMJDBUJPOTHSFBUFSUIBO7
©2011 Littelfuse, Inc.
HB34, HF34 and HG34 Varistor Series
Revision: February 21, 2011
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/hb34 or /hf34 or /hg34.html
for current information.
Varistor Products
Industrial High Energy Terninal Varistors > HB34, HF34 & HG34 Series
Peak Pulse Current Test Waveform
PERCENT OF PEAK VALUE
Power Dissipation Ratings
100
90
50
10
O1
T
TIME
T1
T2
Figure 1
Figure 2
017JSUVBM0SJHJOPG8BWF
55JNFGSPNUPPG1FBL
T1 = Rise Time = 1.25 x T
T2%FDBZ5JNF
Example - For an 8/20 μT$VSSFOU8BWFGPSN
8μs = T1 = Rise Time
20μs = T2%FDBZ5JNF
Should transients occur in rapid succession, the
average power dissipation result is simply the energy
(watt-seconds) per pulse times the number of pulses
per second. The power so developed must be within
UIFTQFDJmDBUJPOTTIPXOPOUIF%FWJDF3BUJOHTBOE
Specifications Table for the specific device. The operating
values must be derated as shown in above.
Clamping Voltage for HB34, HF34 and HG34 Series
Surge Current Rating Curves for HB34, HF34 and HG34 Series
10000
50,000
1
TA = -55 C to 85C
Maximum Clamping Voltage
HB34, HF34, and HG34 series
20,000
10,000
V751
V551
V571
1000
V481
V141 V131
V111
5,000
10 2
2,000
10 3
1,000
100
10
10mA
100mA
Current - AMPS
1A
V391
10A
100A 1000A
V351 V331 V321 V301 V271
Figure 3
10000A
10 4
200
20
V151
100
1mA
10 6
50
V441
V421
500
10 5
100000A
INDEFINITE
20
100
1,000
10,000
IMPULSE DURATION (μs)
V251 V201 V181
Figure 4
/05&*GQVMTFSBUJOHTBSFFYDFFEFEBTIJGUPG7/%$
(at specified current) of more than
+/-10% could result. This type of shift, which normally results in a decrease of V/%$
, may
result in the device not meeting the original published specifications, but it does not
prevent the device from continuing to function, and to provide ample protection.
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/hb34.html or /hf34 or /hg34.thml
for current information.
HB34, HF34 and HG34 Varistor Series
Revision: February 21, 2011
HBx/HFx/HGx
HI–ENERGY MOV’S
Series
V511
Hx34
V681
SURGE CURRENT (A)
V661
Voltage VOLTS
2
10
Varistor Products
Industrial High Energy Terminal Varistors > HB34, HF34 & HG34 Series
Wave Solder Profile
Lead–free Profile
Non Lead–free Profile
300
300
250
TEMPERATURE (ºC)
250
TEMPERATURE (ºC)
Maximum Wave 260C
Maximum Wave 240C
200
150
100
200
150
100
50
50
0
0
0
0.5
1
Figure 5
1.5
2
2.5
3
3.5
0
4
0.5
1
Figure 6
TIME(MINUTES)
1.5
2
2.5
3
3.5
Physical Specifications
Environmental Specifications
Lead Material
Tin-plated Copper
Operating/Storage
Temperature
-55°C to +85°C/-55°C to +125°C
Soldering
Characteristics
4PMEFSBCJMJUZQFS.*-o45%o
Method 208E
Humidity Aging
+85°C, 85% RH, 1000 hours
+/-10% Voltage
Insulating Material
Cured, flame retardant epoxy polymer
NFFUT6-7oSFRVJSFNFOUT
Thermal Shock
+85°C to -40°C 5 times
+/-10% Voltage
Solvent Resistance
.*-o45%o.FUIPE'
Moisture Sensitivity
-FWFM+o45%o$
Device Labeling
4
TIME(MINUTES)
-'1BSU/VNCFSBOEEBUFDPEF
©2011 Littelfuse, Inc.
HB34, HF34 and HG34 Varistor Series
Revision: February 21, 2011
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/hb34 or /hf34 or /hg34.html
for current information.
Varistor Products
Industrial High Energy Terninal Varistors > HB34, HF34 & HG34 Series
Dimensions (mm)
HB34 Series Thickness and Terminal Offset Dimensions
HB34 Series
42.5
MAX
47.5
MAX
22.0 +/- 1.0
2.30
+/- 0.2
2.5 TO
5.0
0.55
+/- 0.1
6.0 +/- 0.1
Part Type
T Body Thickness
(Max)
S Mounting
Terminal Offset
V111HB34
V131HB34
V141HB34
V151HB34
V181HB34
V201HB34
V251HB34
V271HB34
V301HB34
V321HB34
V331HB34
V351HB34
7)#
V421HB34
V441HB34
V481HB34
V511HB34
V551HB34
V571HB34
V661HB34
V681HB34
V751HB34
5.5
5.7
5.8
6.0
6.0
6.1
6.4
6.7
7.0
7.3
7.6
7.8
8.0
8.3
8.8
10.2
10.4
10.7
5.30 -/+ 0.65
5.50 -/+ 0.65
5.70 -/+ 0.65
6.10 -/+ 0.65
6.10 -/+ 0.65
6.25 -/+ 0.65
6.50 -/+ 0.65
6.70 -/+ 0.65
7.20 -/+ 0.85
7.50 -/+ 0.85
7.85 -/+ 0.85
8.25 -/+ 1.00
8.60 -/+ 1.00
8.55 -/+ 1.5
8.85 -/+ 1.5
10.35 -/+ 1.5
10.65 -/+ 1.5
T
S
/05&%JNFOTJPOJONNJTUZQJDBMVOMFTTPUIFSXJTFTQFDJmFE
HF34 Series Thickness and Terminal Offset Dimensions
HF34 Series
T max
37.0 max
56 max
12.7 typ
3.7+/- 0.25
Dia 3.81 +/- 0.08
25.4 +/- 0.5
S
0.51 +/- 0.1
7.06 +/- 0.2
Part Type
T Body Thickness
(Max)
S Mounting
Terminal Offset
V111HF34
V131HF34
V141HF34
V151HF34
V181HF34
V201HF34
V251HF34
V271HF34
V301HF34
V321HF34
V331HF34
V351HF34
7)'
V421HF34
V441HF34
V481HF34
V511HF34
V551HF34
V571HF34
V661HF34
V681HF34
V751HF34
5.5
5.7
5.8
6.0
6.0
6.1
6.4
6.7
7.0
7.3
7.6
7.8
8.0
8.3
8.8
10.2
10.4
10.7
2.0 -/+ 0.65
2.1 -/+ 0.65
2.2 -/+ 0.65
2.4 -/+ 0.65
2.5 -/+ 0.65
2.6 -/+ 0.65
2.7 -/+ 0.85
3.2 -/+ 0.85
3.4 -/+ 0.85
3.5 -/+ 0.85
4.2 -/+ 0.85
4.4 -/+ 0.85
4.5 -/+ 0.85
4.8 -/+ 1.0
5.2 -/+ 1.0
5.5 -/+ 1.0
5.7 -/+ 1.5
6.5 -/+ 1.5
6.7 -/+ 1.5
7.3 -/+ 1.5
/PUF5FSNJOBM.BUFSJBM5JOoQMBUFE$PWFS
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/hb34.html or /hf34 or /hg34.thml
for current information.
HB34, HF34 and HG34 Varistor Series
Revision: February 21, 2011
HBx/HFx/HGx
HI–ENERGY MOV’S
Series
37.0 MAX
Varistor Products
Industrial High Energy Terminal Varistors > HB34, HF34 & HG34 Series
Dimensions (mm)
HG34 Series Thickness and Terminal Offset Dimensions
HG34 Series
T max
37.0 max
46 max
0.51 +/- 0.1
7.06 +/- 0.2
S
25.4 +/- 0.5
Dia 3.81 +/- 0.08
/PUF5FSNJOBM.BUFSJBM5JOoQMBUFE$PWFS
Part Type
T Body Thickness
(Max)
S Mounting
Terminal Offset
V111HG34
V131HG34
V141HG34
V151HG34
V181HG34
V201HG34
V251HG34
V271HG34
V301HG34
V321HG34
V331HG34
V351HG34
7)(
V421HG34
V441HG34
V481HG34
V511HG34
V551HG34
V571HG34
V661HG34
V681HG34
V751HG34
5.5
5.7
5.8
6.0
6.0
6.1
6.4
6.7
7.0
7.3
7.6
7.8
8.0
8.3
8.8
10.2
10.4
10.7
6.0 -/+ 0.65
5.8 -/+ 0.65
5.6 -/+ 0.65
5.5 -/+ 0.65
5.4 -/+ 0.65
5.4 -/+ 0.65
5.2 -/+ 0.65
4.7 -/+ 0.85
4.5 -/+ 0.85
4.4 -/+ 0.85
4.1 -/+ 0.85
3.8-/+ 0.85
3.5 -/+ 0.85
3.3 -/+ 0.85
3.1 -/+ 1.0
2.7 -/+ 1.0
2.4 -/+ 1.0
2.2 -/+ 1.5
1.4 -/+ 1.5
1.2 -/+ 1.5
0.6 -/+ 1.5
%JNFOTJPOTJONN
Part Numbering System
V 25 1 HB 34
VARISTOR DESIGNATOR
DISC SIZE (mm)
SERIES DESIGNATOR
MAX AC RMS WORKING VOLTAGE
(First Significant Digits) VM(AC)
HB: HB34 Series
HF: HF34 Series
HG: HG34 Series
VM(AC VOLTAGE
DECADE MULTIPLIER
©2011 Littelfuse, Inc.
HB34, HF34 and HG34 Varistor Series
Revision: February 21, 2011
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/hb34 or /hf34 or /hg34.html
for current information.