Dummy Stowage Receptacles M28840/7 Dummy Stowage Receptacle Mating Connector MIL-C-28840 M28840/7 G 1 Basic Part No. Key Positions (1, 2, 3, 4, 5 or 6) Shell Size Designator C .898 / .878 (22.8 / 22.3) B .130 / .100 (3.3 / 2.5) A Thread D Dia 4 Holes TABLE I Shell E Shell Size Thread Designator Size Ref. 11 0.750-0.1P-0.2L-DS A 13 0.875-0.1P-0.2L-DS B 15 1.062-0.1P-0.2L-DS C 17 1.125-0.1P-0.2L-DS D 19 1.312-0.1P-0.2L-DS E 23 1.500-0.1P-0.2L-DS F 25 1.625-0.1P-0.2L-DS G 29 1.812-0.1P-0.2L-DS H 33 2.000-0.1P-0.2L-DS J B Dim .750 (19.1) .843 (21.4) .968 (24.6) 1.015 (25.8) 1.140 (29.0) 1.281 (32.5) 1.392 (35.4) 1.568 (39.8) 1.734 (44.0) C Max 1.043 (26.5) 1.158 (29.4) 1.278 (32.5) 1.403 (35.6) 1.528 (38.8) 1.738 (44.1) 1.838 (46.7) 2.158 (54.8) 2.348 (59.6) D Max .130 (3.3) .130 (3.3) .130 (3.3) .130 (3.3) .130 (3.3) .130 (3.3) .157 (4.0) .157 (4.0) .183 (4.6) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Finish is cadmium olive drab over electroless nickel (500 hour salt spray). © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 65-4