Special Connectors 247-045 Dual Bay Micro-D Filter Connector Right Angle (90°) Printed Circuit Board Mount 2.515 (63.9) 1.465 (37.2) 4x R .060 (1.5) .450 (11.4) .330 (8.4) 45° 1.330 (33.8) .865 (22.0) .865 (22.0) .050 (1.3) 6x R .090 (2.3) .320 .145 .055 (8.1) .400 .225 (3.7) (1.4) (10.2) (5.7) .145 .055 .223 (5.66) Position 1 .250 (6.4) Socket 1 7x 2-56 UNC-2A Threaded Insert IAW MS122095 2.605 (66.2) 2.660 (67.6) .108 (2.7) 2.215 (56.3) -R- .536 (13.6) .100 (2.5) .002 (.05) .020 .100 (.5) (2.5) .083 (2.1) 4x .100 .050 .865 (22.0) .096 (2.4) .270 (6.9) Dual Bay Please Consult Factory for Additional Insert Arrangements and Other Options to This Custom Connector Design APPLICATION NOTES 1. Interpret Drawing IAW ASME-Y-14.5 Insulation Resistance - 5000 MegOhms min. at 100 VDC Dielectric Withstand Voltage - 200 VDC Insertion Loss 10 dB @ 10 MHz 25 dB @ 100 MHz 40 dB @ 1 GHz 50 dB @ 10 GHz 2. Interface Dimensions IAW MIL-DTL-83513/04-C G 3. Materials and Finishes: Shell - Aluminum Alloy / Tin over Nickel IAW ASTM-B-545 Insulators and Potting Trays - Liquid Crystal Polymer Contacts - Copper Alloy / Gold over Nickel Leads - 25 AWG Copper / Gold Plated Interfacial Seals - Flourosilicone Hardware - Stainless Steel / Passivated Potting - HYSOL EE4215, or 2850FT 5. Each assembly to be shipped with 4 rear panel mount jackposts for mounting to a .020 thick panel. (See Detail B) 4. Electrical Parameters: Capacitace - Pins 9, 24, 27, 29, 34, 37 and 39 are internally grounded to shell. All remaining pins are to be 16-22.5 nF © 2008 Glenair, Inc. 6. Part supplied with EMI Spring installed. 7. Metric Dimensions (mm) are indicated in parentheses. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] G-6 www.glenair.com Special Connectors 247-045 Dual Bay Micro-D Filter Connector Right Angle (90°) Printed Circuit Board Mount See Detail A +/- .725 (18.4) .025 (.6) .374 (9.5) .196 (5.0) .090 (2.286) .115 (2.9) +/- .015 (.4) .018 (.46) (25 AWG) Solder Dip Exposed Tails .002 (.05) .023 (.6) .046 (1.2) .156 (4.0) Detail A 1 2-56 UNC 2A .050 (1.3) .033 (.8) 12 .365 (9.3) .119 (3.0) +/- .003 (.08) 2-56 UNC 2B 21 11 45° .014 (.36) +/- .003 (.08) .188 (4.8) +/- .005 (.13) Detail B 33 22 42 32 Mating Face Contact Identification G Termination Contact Identification © 2008 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] G-7 www.glenair.com