MIL-C-24308 D-Subminiature 557-262 EMI/RFI Banding Backshell Assembly for MIL-C-24308 Connectors 557 262 M 2 C B Basic Number Retainer Clips & Jackscrews Jackscrew Options: (Omit for None) Finish (Table III) Cable Entry (Table II) Product Series Shell Size (Table I) G F .380 (9.7) See Note 2 .380 (9.7) D "C" Option E .035 (0.9) Connector shown for Reference Only A C .125/.115 (3.2/2.3) 2 Places B .125 (3.2) Radius 2 Places NOTES: 1. Metric dimensions (mm) are indicated in parentheses. 2. End Fitting may be brazed on per MIL-B-7883B, Type V, Grade B. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-92 MIL-C-24308 D-Subminiature 557-262 EMI/RFI Banding Backshell Assembly for MIL-C-24308 Connectors TABLE I: BACKSHELL & CONNECTOR INTERFACE DIMENSIONS Shell Size 1 2 3 4 5 A 1.203 1.531 2.078 2.718 2.625 (30.6) (38.9) (52.8) (69.0) (66.7) .500 .500 .500 .500 .609 B (12.7) (12.7) (12.7) (12.7) (15.5) C +.005 (0.1) .984 (25.0) 1.312 (33.3) 1.852 (47.0) 2.500 (63.5) 2.406 (61.1) D 1.570 (39.9) 1.650 (41.9) 1.930 (49.0) 2.070 (52.6) 2.050 (52.1) F .125 (3.2) .187 (4.7) .265 (6.7) .312 (7.9) .390 (9.9) .415 (10.5) .500 (12.7) .525 (13.3) G .205 .267 .360 .392 .485 .510 .580 .620 Max Entry Size 06 06 06 06 08 TABLE III: FINISH OPTIONS TABLE II: CABLE ENTRY Entry Size 01 02 03 04 05 06 07 08 .440 .440 .500 .500 .440 E (11.2) (11.2) (12.7) (12.7) (11.2) Symbol B C* G* J (5.2) (6.8) (9.1) (10.0) (12.3) (13.0) (14.7) (15.7) LF M N NC NF T U** ZN Finish Cadmium Plate/Olive Drab Black Anodize Anodic Hard Coat Gold Iridite over Cadmium Plate over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Electroless Nickel Cadmium Plate/Olive Drab over Electroless Nickel Zinc Cobalt/Dark Olive Drab Cadmium Plate/Olive Drab over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Cadmium Plate/Black Zinc-Nickel Alloy/Olive Drab *Anodize finish is not suitable for EMI shielding or grounding applications. **Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes. Metric dimensions (mm) are indicated in parentheses © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-93