Composite Junction Boxes Series 140-104 Small Low-Profile Box A Product Series Basic Part Number 140 - Composite Boxes 140 B Small Low-Profile Series 140-104 CostSaver Composite Junction Box XMS TABLE II: MATERIAL COLOR & FINISH OPTIONS Sym Material & Color Finish Options B G – XO and XMS XO and XMS XM, XW and XZN Thermoplastic / Black Thermoplastic / Grey Thermoplastic / NA Finish Symbol (See Table I) Finish Description No Plating (Non-Conductive Finish) Internal Surfaces - Electroless Nickel External Surfaces - See Table II XM All Surfaces – Electroless Nickel XW All Surfaces – Cadmium Olive Drab over Electroless Nickel XZN All Surfaces – Zinc Nickel/Black XMT 2000 Hour Corrosion Resistant Ni-PTFE, NickelFluorocarbon Polymer. 1000 Hour GreyTM TABLE III: KEY DIMENSIONS Box Series Number External Dimensions Internal Dimensions (with Aluminum Mounting Plate Installed, if applicable) Low-Profile 140-104 5.86 (149) x 5.86 (149) x 2.13 (54) 4.90 (124) x 4.90 (124) x 1.53 (39) F G XMS - 0000 TABLE I: FINISHES Symbol XO E 104 Material Color Symbol (See Table II) C D G Dash Number NOTES © 2009 Glenair, Inc. 1. Use Dash Number 0000 for Basic Box with No Additional Options Beyond Your Specified Finish. 0000 Basic Box Includes #6-32 UNC Fasteners. 2. Box Series Numbers are for reference only. Please complete the worksheet on E-14 and call the factory for part number assignment for your specific box configuration. 3. Metric dimensions (mm) are in parenthesis and for reference only CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] E-26 Composite Junction Boxes Series 140-104 Small Low-Profile Box SIDE A 6.68 (169.7) Max A 6.25 (158.8) 5.86 (148.8) Max 3.75 (95.3) B SIDE D 4.75 (120.7) 3.75 (95.3) 5.86 (148.8) Max SIDE B C SIDE C Mounting Hole (4 Places) .190 (4.8) Diameter EMI/RFI Tongue and Groove Environmental Seal .26 (6.6) 2.13 (54.1) Assembly Identified with Manufacturer's Name and Part Number E SIDES A & C .52 (13.2) Ref Mounting Boss accommodates #6-32 Screw (4 Places) D Mounting Plate (Optional) F SIDES B & D © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] E-27 G