IPT Series Bayonet Lock Connectors IPT 08 EM Plug Connector with 90° Backshell with MS 3057 Cable Clamp IPT G 08 EM 18-11 S Z C XX MIL-C-26482 Series l Type Mod Code Options See Table II Grounding Finger (Omit for Standard) Contact Type C - Crimp (Omit for Solder Cup) 08 - 90° Plug Connector/Backshell Class EM - Environmental Plug Connector with Wire Sealing Grommet and 90° Backshell Alternate Insert Rotation (W, X, Y, Z) Omit for Normal Contact Gender P - Pin S - Socket Shell Size and Insert Arrangements G C APPLICATION NOTES 1. Plug with 90° backshell, sealing grommet and 90° Backshell suitable for MS3057 cable clamp. 2. Connector/Backshell Class “EM” (environmental)––Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber. © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] B-106 www.glenair.com IPT Series Bayonet Lock Connectors IPT 08 EM Plug Connector with 90° Backshell with MS 3057 Cable Clamp TABLE I: DIMENSIONS Shell size C Max. G Max. H ±1 L ±1 17.5 19.05 37 32 8 10 22.0 21.80 37 32 12 27.0 26.20 40 35 14 28.0 29.40 43 38 16 33.0 32.55 50 41 18 35.0 35.35 50 44 20 35.0 38.90 50 48 22 43.0 42.10 53 51 24 43.0 45.10 53 56 TABLE II: MODIFICATION CODES Shell Finish (Omit for Standard Cad/Olive Drab Finish) Assembly with Accessories (Omit for Standard Version) F2 - Bright Nickel Plating (RoHs) Key Polarization (Omit for N version) W, X, Y, Z = Alternates F6 - Black Electrodeposited Paint (RoHs) N0 - Connector Less Backshell F7 - Black Zn-Co Plating (RoHs) GXXX - Custom Designed Connector F8 - Olive Drab Zn-Co Plating STANDARD FINISHES (For QQ-A-591 Aluminum Shells) Requirements IAW RoHS Not IAW RoHS F2 Electrolytic Nickel F6 Black Non Conductive F7 Black Conductive G3 Cadmium with Olive F8 Zinc Cobalt with Drab Passivation Olive Drab Passivation Thermal Shock Salt Spray After Thermal Shock Electical Conductivity Abrasion Resistance © 2008 Glenair, Inc. -40°C + 100°C -55°C + 125°C -55°C + 125°C -55°C + 125°C -40°C + 100°C 24 hour 500 hour 500 hour 500 hour 200 hour Very Good Very Good NO Very Good Very Good Good Very Good Very Good Good Good U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] B-107 www.glenair.com