2300 Series Bobbin Wound Surface Mount Inductors SELECTION GUIDE (UNSHIELDED TYPES) Order Code FEATURES RoHS compliant Up to 2.1A IDC 2.2μH to 220μH Optional integral EMI shield Low RDC Surface mount Compact size Tape and reel packaging DESCRIPTION The 2300 series is a range of bobbin-wound, surface-mount inductors designed for use in switching power supply, and power line filter circuits. The parts are suitable for any application requiring a high saturation current in a miniature surface-mount footprint. Where EMI is a critical factor, the devices are available with an integral ferrite EMI shield. Inductance Range (1kHz, 100mVAC) DC Current1 DC Resistance Nom. μH Min. - Max. μH Max. A Max. Ω 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 1.7 - 2.8 2.3 - 3.9 3.6 - 6.0 5.1 - 8.6 7.6 - 12.7 11.3 - 18.9 16.8 - 28.1 24.6 - 41.0 34.6 - 57.6 51.0 - 85.0 74.2 - 124 2.10 1.80 1.48 1.22 1.02 0.86 0.74 0.64 0.55 0.49 0.43 0.040 0.058 0.068 0.102 0.138 0.210 0.361 0.497 0.683 1.051 1.281 Inductance (1kHz, 100mVAC) Inductance Range (1kHz, 100mVAC) DC Current1 DC Resistance Nom. μH Min. - Max. μH Max. A Max. Ω 2.2 3.3 4.7 6.8 10 12 15 18 22 27 33 39 47 56 68 100 150 220 1.8 - 3.0 2.7 - 4.5 3.8 - 6.4 5.2 - 8.6 7.5 - 12.6 9.4 - 15.6 11.4 - 19.0 13.6 - 22.6 16.0 - 26.7 20.0 - 33.3 24.4 - 40.7 29.3 - 48.8 34.6 - 57.7 42.4 - 70.6 50.9 - 84.9 75.8 - 126 112 - 187 167 - 279 2.10 1.80 1.60 1.40 1.18 1.08 0.96 0.88 0.80 0.72 0.65 0.60 0.54 0.50 0.45 0.37 0.30 0.25 0.025 0.031 0.044 0.064 0.087 0.107 0.131 0.143 0.175 0.218 0.241 0.370 0.460 0.509 0.641 0.782 1.190 2.280 232R2C 233R3C 234R7C 236R8C 23100C 23150C 23220C 23330C 23470C 23680C 23101C SELECTION GUIDE (SHIELDED TYPES) J-STD-020C reflow Backward compatible with Sn/Pb soldering systems Inductance (1kHz, 100mVAC) Order Code 23S2R2C 23S3R3C 23S4R7C 23S6R8C 23S100C 23S120C 23S150C 23S180C 23S220C 23S270C 23S330C 23S390C 23S470C 23S560C 23S680C 23S101C 23S151C 23S221C ABSOLUTE MAXIMUM RATINGS Operating free air temperature range -40°C to 85°C Storage temperature range -40°C to 125°C SOLDERING INFORMATION2 Peak reflow temperature 250˚C Pin finish Hot dipped tin For full details go to www.murata-ps.com/rohs www.murata-ps.com Specifications typical at TA = 25°C 1 The maximum DC current is the value at which the inductance falls to 75% of its nominal value or when its temperature rise reaches 40°C, whichever is sooner. 2 For further information, please visit www.murata-ps.com/rohs Technical enquiries - email: [email protected], tel: +44 (0)1908 615232 KMP_2300C_B02 Page 1 of 4 2300 Series Bobbin Wound Surface Mount Inductors MECHANICAL DIMENSIONS UNSHIELDED TYPES SHIELDED TYPES 4.0 (0.157) 5.6 (0.220) XXXC XXXC 3.2 (0.126) 3.2 (0.126) 0.7 (0.028) 4.5 (0.177) 1.7 (0.067) 6.0 (0.236) 5.3 (0.209) Unless otherwise stated all dimensions in mm (inches) ±0.25 (0.01). Package Weight 0.20g Typ. Hatching represents solder pads. www.murata-ps.com R1.0 (0.039) 6.2 (0.244) 1.7 (0.067) 5.0 (0.197) 4.5 (0.177) R1.0 (0.039) Unless otherwise stated all dimensions in mm (inches) ±0.25 (0.01). Package Weight 0.34g Typ. Hatching represents solder pads. Technical enquiries - email: [email protected], tel: +44 (0)1908 615232 KMP_2300C_B02 Page 2 of 4 2300 Series Bobbin Wound Surface Mount Inductors TAPE & REEL SPECIFICATIONS TAPE OUTLINE DIMENSIONS - UNSHIELDED PARTS 1.75 (0.069) 4.00 (0.157) 2.00 (0.079) Ø1.50+0.10-0.00 (0.059+0.004-0.00) 5.50±0.05 (0.217±0.002) 100C 12.00±0.30 (0.472±0.012) Cover tape 0.60 (0.024) Max. 3.60 (0.142) 8.00 (0.315) Direction of unreeling All dimensions in mm (inches) TAPE OUTLINE DIMENSIONS - SHIELDED PARTS 2.00 (0.079) 1.75 (0.069) Ø1.50+0.10-0.00 (0.059+0.004-0.00) 4.00 (0.157) 5.50±0.05 (0.217±0.002) 100C 12.00±0.30 (0.472±0.012) Cover tape 0.60 (0.024) Max. 3.60 (0.142) 8.00 (0.315) Direction of unreeling All dimensions in mm (inches) www.murata-ps.com Technical enquiries - email: [email protected], tel: +44 (0)1908 615232 KMP_2300C_B02 Page 3 of 4 2300 Series Bobbin Wound Surface Mount Inductors TAPE & REEL SPECIFICATIONS REEL OUTLINE DIMENSIONS Ø330.5 (13.012) Max.* R50 (1.97) Min. Ø 11.9-15.4 (0.469-0.606)* 13.50 0.531 Ø 12.80 0.504 Leader Section 400 (15.748) Min. 100 (3.937) Min. 1.50 (0.059) Min. 18.4 (0.724) Max.† Goods Enclosure Section 12.4-12.6 (0.488-0.496)† Trailer Section 160 (6.299) Min. Ø20.20 (Ø0.795) Min. All dimension in mm (inches) * Includes flange distortion at outer edge † Measured at hub USA: Mansfield (MA), Tel: (800) 233 2765, email: [email protected] Canada: Toronto, Tel: (866) 740 1232, email: [email protected] Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 www.murata-ps.com email: [email protected] ISO 9001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2008 Murata Power Solutions, Inc. www.murata-ps.com UK: Milton Keynes, Tel: +44 (0)1908 615232, email: [email protected] France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: [email protected] Germany: München, Tel: +49 (0)89-544334-0, email: [email protected] Japan: Tokyo, Tel: 3-3779-1031, email: [email protected] Osaka, Tel: 6-6354-2025, email: [email protected] Website: www.murata-ps.jp China: Shanghai, Tel: +86 215 027 3678, email: [email protected] Guangzhou, Tel: +86 208 221 8066, email: [email protected] Technical enquiries - email: [email protected], tel: +44 (0)1908 615232 KMP_2300C_B02 Page 4 of 4