VISHAY MRCN10XXXFXXXKE3

MRCN
Vishay Techno
Resistor/Capacitor Networks, Molded SIP
FEATURES
•
•
•
•
•
•
•
Custom schematics available.
NPO or X7R capacitors for line terminator.
Wide operating temperature range.
Molded epoxy case.
Solder coated copper terminals.
Solderability per MIL-STD-202 method 208E.
Marking resistance to solvents per MIL-STD-202 method 215.
ELECTRICAL SPECIFICATIONS - RESISTORS
ELECTRICAL SPECIFICATIONS - CAPACITORS
Resistance Range: 50 ohms to 1 kilohm. Others available.
Type: NPO or X7R.
NPO Capacitance Range Standard: 33 pF - 3900 pF, other
values available.
X7R Capacitance Range: 470 pF - 0.1 µF, other values
available.
Tolerance: NPO Type = ± 10 %, ± 20 %.
X7R Type = ± 10 %, ± 20 %. Tighter tolerance available.
Consult factory at +1-909-923-3313.
Voltage Rating: 50 VDC. Higher voltage available.
Resistance Tolerance: ± 2 %, ± 5 % standard.
± 1 % available.
Temperature Coefficient of Resistance: ± 150 ppm/°C.
Operating Temperature Range: - 55 °C to + 125 °C.
Operating Voltage: 50 VDC maximum. Higher voltage
available.
SCHEMATICS
DIMENSIONS in inches [millimeters]
SCHEMATIC 10
R
C
R
R
R
R
R
0.150 ± 0.010
[3.81 ± 0.254]
#1 Pin
3
2
1
4
5
6
7
8
A
Pin #1 Identifier
B
10K ECL terminator network
0.020 ± 0.002
[0.508 ± 0.051]
SCHEMATIC 20
C
C
C
R
R
R
1
2
3
0.020 ± 0.002
[0.508± 0.051]
0.125 ± 0.015
[3.18 ± 0.381]
C
n
n-1
4
(Seating
Plane)
0.100 ± 0.005
[2.54 ± 0.127]
Non-Cumulative
0.010 ± 0.002
[0.254 ± 0.051]
SCHEMATIC 30
C
R
R
1
3
2
C
R
R
4
5
R
6
7
NUMBER
OF PINS
A
± 0.010 [0.254]
B
± 0.010 [0.254]
C
± 0.010 [0.254]
8
0.780 [19.81]
0.345 [8.26]
0.040 [1.02]
10
1.040 [26.42]
0.346 [8.79]
0.075 [1.91]
R
8
9
10
100K ECL terminator network
NOTE: Custom schematics available.
ORDERING INFORMATION
MRCN
XX
XX
MODEL NUMBER SCHEMATIC
OF PINS
XXX
X
XXX
X
e3
RESISTANCE
VALUE (Ohms)
RESISTANCE
TOLERANCE
CAPACITANCE
VALUE (pF)
CAPACITANCE
TOLERANCE*
LEAD
TERMINATION
First two digits are
significant, third digit signifies
number of zeros to follow.
F=±1%
G=±2%
J=±5%
First two digits are significant,
third digit signifies number of
zeros to follow.
K = ± 10 %
M = ± 20 %
e3 = SnAg
95/5
*Tighter tolerance available.
Document Number: 68008
Revision: 01-Aug-05
www.vishay.com
1
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1