MSP Vishay Dale Thick Film Resistor Networks, Single-In-Line, Molded SIP FEATURES • Isolated, bussed and dual terminator schematics available • 0.195" (4.95 mm) “A” or 0.350" (8.89 mm) “C” maximum seated height • Thick film resisitive elements • Low temperature coefficient (- 55 °C to + 125 °C) ± 100 ppm/°C • Rugged, molded case construction • Reduces total assembly costs • Compatible with automatic insertion equipment and reduces PC board space • Wide resistance range (10 Ω to 2.2 MΩ) • Available in tube pack or side-by-side pack • Compliant to RoHS directive 2002/95/EC STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL/ PROFILE SCHEMATIC A C A C A C MSPxxx01 MSPxxx03 MSPxxx05 MAXIMUM WORKING VOLTAGE (3) VDC TCR POWER RATING TEMPERATURE RESISTANCE ELEMENT COEFFICIENT TRACKING (1) TOLERANCE (2) RANGE P70 °C (- 55 °C to + 125 °C) (- 55 °C to + 125 °C) ±% Ω ± ppm/°C W ± ppm/°C 0.20 10 to 2.2M 1, 2, 5 100 50 0.25 0.30 10 to 2.2M 1, 2, 5 100 50 0.40 0.20 10 to 2.2M 1, 2, 5 100 150 0.25 100 100 100 Notes (1) Tighter tracking available (2) ± 2 % standard, ± 1 % and ± 5 % available (3) Continuous working voltage shall be P x R or maximum working voltage, whichever is less GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MSP06A031K00GDA (preferred part numbering format) M GLOBAL MODEL MSP S P 0 6 A 0 3 1 K 0 0 G D TOLERANCE RESISTANCE VALUE CODE A = “A” profile 01 = Bussed R=Ω 06 = 6 pin F=±1% K = kΩ C = “C” profile 03 = Isolated 08 = 8 pin G=±2% M = MΩ 00 = Special 09 = 9 pin J=±5% 10R0 = 10 Ω 10 = 10 pin S = Special 680K = 680 kΩ 1M00 = 1.0 MΩ Historical Part Number example: MSP06A03102G (will continue to be accepted) A PACKAGING SPECIAL EJ = Lead (Pb)-free, tube DA = Tin/lead, tube Blank = Standard (Dash Number) (Up to 3 digits) From 1 to 999 as applicable PIN COUNT PACKAGE HEIGHT SCHEMATIC MSP 06 A 03 102 G D03 HISTORICAL MODEL PIN COUNT PACKAGE HEIGHT SCHEMATIC RESISTANCE VALUE TOLERANCE CODE PACKAGING New Global Part Numbering: MSP08C05131AGDA (preferred part numbering format) M GLOBAL MODEL MSP S P 0 8 C 0 5 1 3 1 A G D RESISTANCE TOLERANCE VALUE CODE A = “A” profile 05 = Dual 3 digit 06 = 6 pin F=±1% impedance C = “C” profile terminator 08 = 8 pin G=±2% code, followed 09 = 9 pin J=±5% by alpha modifier 10 = 10 pin (see Impedance Codes table) Historical Part Number example: MSP08C05221331G (will continue to be accepted) PACKAGING SPECIAL EJ = Lead (Pb)-free, tube DA = Tin/lead, tube Blank = Standard (Dash Number) (Up to 3 digits) From 1 to 999 as applicable PIN COUNT PACKAGE HEIGHT SCHEMATIC MSP HISTORICAL MODEL 08 C PIN COUNT PACKAGE HEIGHT A 05 221 331 G D03 SCHEMATIC RESISTANCE VALUE 1 RESISTANCE VALUE 2 TOLERANCE PACKAGING * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 31510 Revision: 10-Jun-10 For technical questions, contact: [email protected] www.vishay.com 1 MSP Vishay Dale Thick Film Resistor Networks, Single-In-Line, Molded SIP DIMENSIONS in inches (millimeters) 0.090 (2.29) Max. A Max. 0.015 (0.381) Min. Pin #1 0.040 ± 0.010 (1.02 ± 0.254) D Max. 0.016 ± 0.003 (0.406 ± 0.076) B C Equal Space 0.100 ± 0.010 (2.54 ± 0.254) Non-Accumulative GLOBAL MODEL 0.135 + 0.015 - 0.010 (3.43 + 0.381 - 0.254) 0.012 ± 0.003 (0.305 ± 0.076) A (Max.) B C MSP06 0.590 (14.99) 0.500 (12.70) 5 MSP08 0.790 (20.07) 0.700 (17.78) 7 MSP10 0.990 (25.15) 0.900 (22.86) 9 MSP09 0.890 (22.61) 0.800 (20.32) 8 D (Max.) MSPxxA = 0.195 (4.95) MSPxxC = 0.350 (8.89) 0.195 (4.95) only TECHNICAL SPECIFICATIONS PARAMETER UNIT MSP SERIES Package Power Rating Maximum at + 25 °C and + 70 °C See Derating Curves Voltage Coefficient of Resistance Veff Dielectric Strength < 50 ppm typical VAC 200 Isolation Resistance (03 Schematic) Ω > 100 M Operating Temperature Range °C - 55 to + 125 Storage Temperature Range °C - 55 to + 150 MECHANICAL SPECIFICATIONS Marking Resistance to Solvents Permanency testing per MIL-STD-202, Method 215 Solderability Per MIL-STD-202, Method 208E, RMA flux Body Molded epoxy Terminals Copper alloy, solder plated MSP06C = 0.7 g MSP08C = 0.9 g MSP10C = 1.1 g MSP06A = 0.4 g MSP08A = 0.5 g MSP09A = 0.55 g MSP10A = 0.6 g Weight IMPEDANCE CODES CODE R1 (Ω) R2 (Ω) CODE R1 (Ω) R2 (Ω) 500B 82 130 141A 270 270 750B 120 200 181A 330 390 800C 130 210 191A 330 470 990A 160 260 221B 330 680 101C 180 240 281B 560 560 111C 180 270 381B 560 1.2K 121B 180 390 501C 620 2.7K 121C 220 270 102A 1.5K 3.3K 131A 220 330 202B 3K 6.2K www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 31510 Revision: 10-Jun-10 MSP Thick Film Resistor Networks, Single-In-Line, Molded SIP Vishay Dale CIRCUIT APPLICATIONS 01 Schematic 5, 7, 8 (1) or 9 resistors with one pin common The MSPxxx01 circuit contains 5, 7, 8 (1) or 9 nominally equal resistors, each connected between a common pin (pin no. 1) and a discrete PC board pin. Commonly used in the following applications: • "Wired OR" Pull-up • MOS/ROM Pull-up/Pull-down • Power Gate Pull-up • Open Collector Pull-up • TTL Input Pull-down • TTL Unused Gate Pull-up 1 2 3 n-1 Note (1) Available in “A” Profile only n Standard E-24 resistance values stocked. Consult factory. 03 Schematic 3, 4 or 5 isolated resistors The MSPxxx03 circuit contains 3, 4 or 5 resistors of nominally equal value in a compact package. Each resistor is connected to two discrete PC pins. Standard E-24 resistance values stocked. Consult factory. 1 2 3 4 n-1 n 05 Schematic Pulse squaring and TTL dual-line terminators R2 The MSPxxx05 circuits contain 4, 6, 7 (2) or 8 series pair of resistors. Each series pair is connected between two common lines. The junction of these resistor pairs is connected to the input terminals. R1 The 05 circuits are designed for TTL dual-line termination and pulse squaring. Note (2) Available in “A” Profile only Many dual terminator resistance values stocked. Consult factory. 1 2 Document Number: 31510 Revision: 10-Jun-10 3 n-1 n For technical questions, contact: [email protected] www.vishay.com 3 MSP Vishay Dale Thick Film Resistor Networks, Single-In-Line, Molded SIP 1.90 “C” Profile MSP10A Package 1.50 1.15 Power Rating (Watts) Power Rating (Watts) “A” Profile MSP08A Package MSP06A Package 3.00 MSP10C Package 2.50 MSP08C Package 2.00 1.50 0.45 MSP06C Package Single Resistor 03 0.30 0.60 01 and 05 - 50 Single Resistor 03 0.38 + 25 Derating + 70 + 125 + 150 01 and 05 - 50 Ambient Temperature °C Derating + 25 + 70 + 125 + 150 Ambient Temperature C “A” PROFILE + 70 °C PACKAGE RATINGS “C” PROFILE + 70 °C PACKAGE RATINGS MSP10A 1.25 W MSP10C 1.60 W MSP09A 1.12 W MSP08C 1.30 W MSP08A 1.00 W MSP06C 1.00 W MSP06A 0.75 W Note • Higher power ratings available. Contact factory. PERFORMANCE CONDITIONS MAX. ΔR (TYPICAL TEST LOTS) 1.5 x rated power, applied 1.5 h “ON” and 0.5 h “OFF” for 100 h ± 4 h at + 25 °C ambient temperature ± 0.50 % ΔR 5 cycles between - 65 °C and + 125 °C ± 0.50 % ΔR 2.5 x rated working voltage 5 s ± 0.25 % ΔR 45 min at full rated working voltage at - 65 °C ± 0.25 % ΔR 240 h with humidity ranging from 80 % RH to 98 % RH ± 0.50 % ΔR Leads immersed in + 260 °C solder to within 1/16" of device body for 10 s ± 0.25 % ΔR Total of 18 shocks at 100 g's ± 0.25 % ΔR Vibration 12 h at maximum of 20 g's between 10 Hz and 2000 Hz ± 0.25 % ΔR Load Life 1000 h at + 70 °C, rated power applied 1.5 h “ON”, 0.5 h “OFF” for full 1000 h period. Derated according to the curve. ± 1.00 % ΔR Terminal Strength 4.5 pound pull for 30 s ± 0.25 % ΔR Insulation Resistance 10 000 MΩ (minimum) - - - TEST Power Conditioning Thermal Shock Short Time Overload Low Temperature Operation Moisture Resistance Resistance to Soldering Heat Shock Dielectric Withstanding Voltage www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 31510 Revision: 10-Jun-10 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000