VISHAY IM02EB100K

IM
www.vishay.com
Vishay Dale
Inductors, Commercial, Molded, Axial Leaded
FEATURES
• Wide inductance range in small package
• Flame retardant coating
• Precision performance, excellent reliability,
sturdy construction
• Epoxy molded construction provides superior
moisture protection
• Compliant to RoHS Directive 2011/65/EU
ELECTRICAL SPECIFICATIONS
Inductance Tolerance: ± 1 %, ± 3 %, ± 5 %, ± 10 %,
± 20 %, oter tolerances available on request
Insulation Resistance: 1000 M minimum per
MIL-STD-202, method 302, test condition B
Dielectric Strength: Per MIL-STD-202, method 301:
1000 VAC for IM-2, IM-4, IM-6, IM-8, IM-9 and IM-10
200 VAC for IM-1
TEST EQUIPMENT
MECHANICAL SPECIFICATIONS
Terminal Strength: Per MIL-STD-202, method 211, test
condition A: For IM-1, 3 lb pull; for IM-2, IM-4, IM-6, IM-8,
IM-9 and IM-10, 5 lb pull and twist
Weight: IM-1 = 0.25 g maximum, IM-2 = 0.30 g maximum,
IM-4 = 0.65 g maximum, IM-6 = 0.95 g maximum,
IM-8 = 1.5 g maximum, IM-9 = 2.0 g maximum,
IM-10 = 2.5 g maximum
(1)
• H/P 4342A Q-meter
• Measurements corporation megacycle meter, model 59
• Wheatstone bridge
Note
(1) Test procedure per MIL-PRF-15305
INDUCTANCE RANGE AND MILITARY STANDARD
MATERIAL SPECIFICATIONS
Encapsulant: Epoxy
Standard Terminals: IM-1 and IM-2: 24 AWG; IM-4, IM-6
and IM-9: 22 AWG; IM-8: 21 AWG; IM-10: 20 AWG, tinned
copper
MODEL
IM-1
IM-2
ENVIRONMENTAL PERFORMANCE
TEST
CONDITIONS
SPECIFICATIONS
Barometric
C
MIL-STD-202, method 105
Pressure
Thermal Shock
A-1
MIL-STD-202, method 107
Flammability
MIL-STD-202, method 111
Overload
MIL-PRF-15305
Low Temperature
MIL-PRF-15305
Storage
Resistance to
A
MIL-STD-202, method 210
Soldering Heat
Resistance to
MIL-STD-202, method 215
Solvents
IM-4
IM-6
IM-8
IM-9
IM-10
INDUCTANCE RANGE (μH)
MIN.
MAX.
0.10
100
0.022
0.082
0.10
1
1.2
27
33
1000
0.15
4.7
5.6
33
36
240
270
1800
0.10
2.7
3.3
27
33
220
270
1000
1100
3600
68
150
3900
10 000
DIMENSIONS in inches [millimeters]
C
Typ.
B
D Dia.
MODEL
IM-1
IM-2
IM-4
IM-6
IM-8
IM-9
IM-10
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Revision: 21-Feb-12
A (DIA.)
0.086 [2.18]
0.070 [1.78]
0.105 [2.67]
0.085 [2.16]
0.165 [4.19]
0.145 [3.68]
0.200 [5.08]
0.180 [4.57]
0.225 [5.72]
0.205 [5.21]
0.260 [6.60]
0.240 [6.10]
0.250 [6.35]
0.230 [5.84]
A Dia.
B
0.210 [5.33]
0.190 [4.83]
0.260 [6.60]
0.240 [6.10]
0.385 [9.78]
0.365 [9.27]
0.450 [11.43]
0.430 [10.92]
0.570 [14.48]
0.550 [13.97]
0.570 [14.48]
0.550 [13.97]
0.750 [19.05]
0.730 [18.54]
C (TYP.)
1.62 [41.15]
1.38 [35.05]
1.63 [41.40]
1.25 [31.75]
1.63 [41.40]
1.25 [31.75]
1.63 [41.40]
1.25 [31.75]
1.63 [41.40]
1.25 [31.75]
1.63 [41.40]
1.25 [31.75]
1.63 [41.40]
1.25 [31.75]
D (DIA.)
0.0215 [0.546]
0.0185 [0.470]
0.0215 [0.546]
0.0185 [0.470]
0.027 [0.686]
0.023 [0.584]
0.027 [0.686]
0.023 [0.584]
0.030 [0.762]
0.026 [0.660]
0.027 [0.686]
0.023 [0.584]
0.034 [0.864]
0.030 [0.762]
Document Number: 34030
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IM
www.vishay.com
Vishay Dale
Revision: 21-Feb-12
DCR MAX.
()
0.13
0.15
0.18
0.21
0.25
0.38
0.49
0.59
0.62
0.18
0.20
0.22
0.25
0.28
0.49
0.56
0.72
0.85
1.2
1.5
2.1
2.8
3.2
4.4
5.2
3.0
3.4
3.8
4.3
4.7
5.2
6.8
8.2
10.0
11.5
16.0
17.5
0.025
0.03
0.035
0.04
0.045
0.05
0.06
0.07
0.08
0.09
0.10
0.12
0.14
0.16
0.22
0.30
0.35
0.50
0.60
0.85
1.0
RATED DC CURRENT
(mA) (2)
895
835
760
705
645
525
460
420
410
510
485
465
435
410
310
290
257
236
198
178
150
130
122
104
95
126
118
112
105
100
95
83.5
76
69
64
54.5
52
2400
2200
2000
1900
1800
1700
1500
1400
1350
1270
1200
1105
1025
960
815
700
650
545
495
415
385
IRON CORE
SRF MIN.
(MHz) (1)
680.0
650.0
560.0
540.0
500.0
440.0
410.0
380.0
340.0
250.0
215.0
200.0
190.0
170.0
150.0
135.0
130.0
110.0
100.0
95.0
88.0
78.0
69.0
52.0
47.0
31.0
26.0
23.0
20.0
17.0
15.0
13.5
12.5
11.5
10.5
10.0
9.5
900.0
875.0
850.0
825.0
800.0
775.0
750.0
725.0
680.0
640.0
600.0
550.0
510.0
430.0
410.0
365.0
330.0
300.0
275.0
250.0
230.0
PHENOLIC CORE
IND.
TEST FREQUENCY Q
TOL.
Q
MODEL
(μH)
(%)
MIN.
(MHz)
IM-1
0.10
± 10
35
25.0
IM-1
0.12
± 10
35
25.0
IM-1
0.15
± 10
35
25.0
IM-1
0.18
± 10
35
25.0
IM-1
0.22
± 10
30
25.0
IM-1
0.27
± 10
30
25.0
IM-1
0.33
± 10
25
25.0
IM-1
0.39
± 10
25
25.0
IM-1
0.47
± 10
25
25.0
IM-1
0.56
± 10
40
25.0
IM-1
0.68
± 10
40
25.0
IM-1
0.82
± 10
40
25.0
IM-1
1.0
± 10
40
25.0
IM-1
1.2
± 10
35
7.9
IM-1
1.5
± 10
40
7.9
IM-1
1.8
± 10
40
7.9
IM-1
2.2
± 10
45
7.9
IM-1
2.7
± 10
45
7.9
IM-1
3.3
± 10
45
7.9
IM-1
3.9
± 10
50
7.9
IM-1
4.7
± 10
55
7.9
IM-1
5.6
± 10
55
7.9
IM-1
6.8
± 10
55
7.9
IM-1
8.2
± 10
45
7.9
IM-1
10.0
± 10
45
7.9
IM-1
12.0
± 10
40
2.5
IM-1
15.0
± 10
40
2.5
IM-1
18.0
± 10
40
2.5
IM-1
22.0
± 10
45
2.5
IM-1
27.0
± 10
45
2.5
IM-1
33.0
± 10
45
2.5
IM-1
39.0
± 10
45
2.5
IM-1
47.0
± 10
45
2.5
IM-1
56.0
± 10
45
2.5
IM-1
68.0
± 10
45
2.5
IM-1
82.0
± 10
45
2.5
IM-1
100.0
± 10
45
2.5
IM-2
0.022
± 10
50
50.0
IM-2
0.027
± 20
40
25.0
IM-2
0.033
± 10
40
25.0
IM-2
0.039
± 10
40
25.0
IM-2
0.047
± 10
40
25.0
IM-2
0.056
± 10
40
25.0
IM-2
0.068
± 10
40
25.0
IM-2
0.082
± 10
40
25.0
IM-2
0.10
± 10
40
25.0
IM-2
0.12
± 10
40
25.0
IM-2
0.15
± 10
38
25.0
IM-2
0.18
± 10
35
25.0
IM-2
0.22
± 10
33
25.0
IM-2
0.27
± 10
33
25.0
IM-2
0.33
± 10
30
25.0
IM-2
0.39
± 10
30
25.0
IM-2
0.47
± 10
30
25.0
IM-2
0.56
± 10
30
25.0
IM-2
0.68
± 10
28
25.0
IM-2
0.82
± 10
28
25.0
IM-2
1.0
± 10
25
25.0
Notes
(1) Measured with full length lead
(2) Rated DC current based on maximum temperature rise as shown in table
PHENOLIC CORE
STANDARD ELECTRICAL SPECIFICATIONS
Document Number: 34030
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IM
www.vishay.com
Vishay Dale
Revision: 21-Feb-12
RATED DC CURRENT
(mA) (2)
590
535
455
395
355
270
250
230
185
175
155
130
155
150
145
140
135
130
125
110
100
92
88
84
66
61
57
52
47
45
40
36
35
30
29
28
2450
1810
1400
1225
1150
1100
900
785
650
600
525
435
385
300
280
260
495
395
360
290
265
240
FERRITE CORE
DCR MAX.
()
0.18
0.22
0.30
0.40
0.55
0.85
1.0
1.2
1.8
2.0
2.7
3.7
2.7
2.8
3.1
3.3
3.5
3.4
3.6
4.5
5.7
6.7
7.3
8
13
15
17
21
25
28
35
42
46
60
65
72
0.03
0.055
0.09
0.12
0.135
0.15
0.22
0.29
0.42
0.50
0.65
0.95
1.20
2.0
2.30
2.60
0.32
0.50
0.60
0.90
1.10
1.40
PHENOLIC CORE
SRF MIN.
(MHz) (1)
150.0
140.0
125.0
115.0
100.0
90.0
80.0
75.0
65.0
60.0
55.0
50.0
40.0
35.0
30.0
25.0
20.0
24.0
22.0
20.0
18.0
15.0
14.0
13.0
12.0
11.0
10.0
9.0
8.0
7.0
6.5
6.0
5.0
4.0
3.8
3.4
525.0
450.0
360.0
310.0
280.0
250.0
220.0
200.0
180.0
160.0
150.0
135.0
120.0
110.0
100.0
90.0
60.0
55.0
50.0
45.0
42.0
40.0
IRON CORE
IND.
TEST FREQUENCY Q
TOL.
Q
MODEL
(μH)
(%)
MIN.
(MHz)
IM-2
1.2
± 10
25
7.9
IM-2
1.5
± 10
28
7.9
IM-2
1.8
± 10
30
7.9
IM-2
2.2
± 10
30
7.9
IM-2
2.7
± 10
37
7.9
IM-2
3.3
± 10
45
7.9
IM-2
3.9
± 10
45
7.9
IM-2
4.7
± 10
45
7.9
IM-2
5.6
± 10
50
7.9
IM-2
6.8
± 10
50
7.9
IM-2
8.2
± 10
55
7.9
IM-2
10.0
± 10
55
7.9
IM-2
12.0
± 10
45
2.5
IM-2
15.0
± 10
40
2.5
IM-2
18.0
± 10
50
2.5
IM-2
22.0
± 10
50
2.5
IM-2
27.0
± 10
50
2.5
IM-2
33.0
± 10
45
2.5
IM-2
39.0
± 10
45
2.5
IM-2
47.0
± 10
45
2.5
IM-2
56.0
± 10
45
2.5
IM-2
68.0
± 10
50
2.5
IM-2
82.0
± 10
50
2.5
IM-2
100.0
± 10
50
2.5
IM-2
120.0
± 10
30
0.79
IM-2
150.0
± 10
30
0.79
IM-2
180.0
± 10
30
0.79
IM-2
220.0
± 10
30
0.79
IM-2
270.0
± 10
30
0.79
IM-2
330.0
± 10
30
0.79
IM-2
390.0
± 10
30
0.79
IM-2
470.0
± 10
30
0.79
IM-2
560.0
± 10
30
0.79
IM-2
680.0
± 10
30
0.79
IM-2
820.0
± 10
30
0.79
IM-2
1000.0
± 10
30
0.79
IM-4
0.15
± 20
50
25
IM-4
0.22
± 20
50
25
IM-4
0.33
± 20
45
25
IM-4
0.47
± 20
45
25
IM-4
0.56
± 10
50
25
IM-4
0.68
± 10
50
25
IM-4
0.82
± 10
50
25
IM-4
1.0
± 10
50
25
IM-4
1.2
± 10
33
7.9
IM-4
1.5
± 10
33
7.9
IM-4
1.8
± 10
33
7.9
IM-4
2.2
± 10
33
7.9
IM-4
2.7
± 10
33
7.9
IM-4
3.3
± 10
33
7.9
IM-4
3.9
± 10
33
7.9
IM-4
4.7
± 10
33
7.9
IM-4
5.6
± 10
45
7.9
IM-4
6.8
± 10
50
7.9
IM-4
8.2
± 10
50
7.9
IM-4
10.0
± 10
55
7.9
IM-4
12.0
± 10
65
2.5
IM-4
15.0
± 10
65
2.5
Notes
(1) Measured with full length lead
(2) Rated DC current based on maximum temperature rise as shown in table
IRON CORE
STANDARD ELECTRICAL SPECIFICATIONS
Document Number: 34030
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IM
www.vishay.com
Vishay Dale
Revision: 21-Feb-12
SRF MIN.
(MHz) (1)
34.0
30.0
25.0
19.0
15.5
14.5
13.7
13.0
12.7
12.0
11.5
11.0
10.5
10.3
10.0
9.5
8.9
8.7
8.5
8.0
7.5
7.0
6.5
6.2
5.9
5.7
5.4
5.1
4.8
4.5
4.2
3.9
3.7
3.5
3.3
3.1
2.9
2.7
2.5
2.3
2.1
2.0
1.9
1.8
1.7
1.6
510.0
510.0
510.0
450.0
415.0
380.0
350.0
320.0
300.0
270.0
DCR MAX.
()
2.25
2.50
2.60
3.0
2.50
2.60
2.70
2.75
2.85
3.00
3.15
3.30
3.70
3.90
4.30
4.50
4.90
5.20
5.45
6.05
6.40
6.75
7.10
7.45
7.80
11.0
11.5
12.0
15.5
16.3
17.1
17.9
18.8
24.7
25.9
27.2
28.6
30.0
31.5
33.1
43.5
45.7
49.0
52.5
54.0
56.7
0.020
0.025
0.030
0.030
0.035
0.050
0.065
0.080
0.085
0.125
RATED DC CURRENT
(mA) (2)
185
175
170
165
180
176
172
170
167
164
160
156
147
143
136
133
128
124
121
114
111
108
106
103
101
129
125
123
108
105
102
100
98
85
83
81
79
77
76
74
64
63
61
59
58
56
3600
3300
3000
2900
2800
2400
2000
1800
1700
1450
PHENOLIC CORE
IND.
TEST FREQUENCY Q
TOL.
Q
MODEL
(μH)
(%)
MIN.
(MHz)
IM-4
18.0
± 10
75
2.5
IM-4
22.0
± 10
75
2.5
IM-4
27.0
± 10
60
2.5
IM-4
33.0
± 10
65
2.5
IM-4
36.0
±5
60
2.5
IM-4
39.0
±5
60
2.5
IM-4
43.0
±5
60
2.5
IM-4
47.0
±5
55
2.5
IM-4
51.0
±5
55
2.5
IM-4
56.0
±5
55
2.5
IM-4
62.0
±5
55
2.5
IM-4
68.0
±5
55
2.5
IM-4
75.0
±5
55
2.5
IM-4
82.0
±5
50
2.5
IM-4
91.0
±5
50
2.5
IM-4
100.0
±5
50
2.5
IM-4
110.0
±5
60
0.79
IM-4
120.0
±5
65
0.79
IM-4
130.0
±5
65
0.79
IM-4
150.0
±5
65
0.79
IM-4
160.0
±5
65
0.79
IM-4
180.0
±5
65
0.79
IM-4
200.0
±5
65
0.79
IM-4
220.0
±5
65
0.79
IM-4
240.0
±5
65
0.79
IM-4
270.0
±5
65
0.79
IM-4
300.0
±5
65
0.79
IM-4
330.0
±5
65
0.79
IM-4
360.0
±5
65
0.79
IM-4
390.0
±5
65
0.79
IM-4
430.0
±5
65
0.79
IM-4
470.0
±5
65
0.79
IM-4
510.0
±5
65
0.79
IM-4
560.0
±5
65
0.79
IM-4
620.0
±5
65
0.79
IM-4
680.0
±5
55
0.79
IM-4
750.0
±5
55
0.79
IM-4
820.0
±5
55
0.79
IM-4
910.0
±5
55
0.79
IM-4
1000.0
±5
55
0.79
IM-4
1100.0
±5
30
0.25
IM-4
1200.0
±5
30
0.25
IM-4
1300.0
±5
30
0.25
IM-4
1500.0
±5
30
0.25
IM-4
1600.0
±5
30
0.25
IM-4
1800.0
±5
30
0.25
IM-6
0.10
± 20
55
25.0
IM-6
0.12
± 20
55
25.0
IM-6
0.15
± 20
55
25.0
IM-6
0.18
± 20
55
25.0
IM-6
0.22
± 20
50
25.0
IM-6
0.27
± 20
50
25.0
IM-6
0.33
± 20
50
25.0
IM-6
0.39
± 20
50
25.0
IM-6
0.47
± 20
50
25.0
IM-6
0.56
± 10
50
25.0
Notes
(1) Measured with full length lead
(2) Rated DC current based on maximum temperature rise as shown in table
IRON CORE
STANDARD ELECTRICAL SPECIFICATIONS
Document Number: 34030
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IM
www.vishay.com
Vishay Dale
Revision: 21-Feb-12
DCR MAX.
()
0.150
0.205
0.290
0.400
0.485
0.740
0.970
1.20
0.140
0.155
0.210
0.280
0.375
0.440
0.605
1.05
1.20
1.95
2.20
2.75
3.5
3.8
4.0
4.4
4.7
5.3
6.0
5.0
5.8
6.6
7.4
8.2
8.7
9.1
9.6
10.0
10.6
11.1
11.6
12.3
13.0
13.7
14.4
15.1
15.8
16.5
21.0
22.0
23.0
25.0
26.0
28.0
29.0
RATED DC CURRENT
(mA) (2)
1300
1100
930
785
700
580
505
460
990
870
745
645
560
540
440
370
310
255
240
205
185
176
170
164
156
143
133
124
118
114
112
110
107
105
102
100
97
95
93
91
88
85
83
81
79
78
78
76
75
72
70
68
67
IRON CORE
SRF MIN.
(MHz) (1)
250.0
210.0
200.0
180.0
170.0
150.0
140.0
120.0
70.0
65.0
60.0
50.0
50.0
48.0
42.0
36.0
30.0
30.0
24.0
22.0
20.0
18.0
16.0
15.0
12.0
10.0
8.0
6.0
5.4
5.0
4.7
5.6
5.3
5.0
4.7
4.5
4.3
4.0
3.8
3.6
3.5
3.4
3.3
3.1
2.9
2.8
2.8
2.7
2.6
2.4
2.3
2.2
2.1
IRON CORE
IND.
TEST FREQUENCY Q
TOL.
Q
MODEL
(μH)
(%)
MIN.
(MHz)
IM-6
0.68
± 10
45
25.0
IM-6
0.82
± 10
40
25.0
IM-6
1.0
± 10
40
25.0
IM-6
1.2
± 10
30
7.9
IM-6
1.5
± 10
30
7.9
IM-6
1.8
± 10
30
7.9
IM-6
2.2
± 10
30
7.9
IM-6
2.7
± 10
30
7.9
IM-6
3.3
± 10
30
7.9
IM-6
3.9
± 10
30
7.9
IM-6
4.7
± 10
30
7.9
IM-6
5.6
± 10
30
7.9
IM-6
6.8
± 10
30
7.9
IM-6
8.2
± 10
30
7.9
IM-6
10.0
± 10
30
7.9
IM-6
12.0
± 10
50
2.5
IM-6
15.0
± 10
55
2.5
IM-6
18.0
± 10
60
2.5
IM-6
22.0
± 10
60
2.5
IM-6
27.0
± 10
65
2.5
IM-6
33.0
± 10
75
2.5
IM-6
39.0
± 10
75
2.5
IM-6
47.0
± 10
75
2.5
IM-6
56.0
± 10
75
2.5
IM-6
68.0
± 10
75
2.5
IM-6
82.0
± 10
75
2.5
IM-6
100.0
± 10
65
2.5
IM-6
120.0
± 10
65
0.79
IM-6
150.0
± 10
65
0.79
IM-6
180.0
± 10
65
0.79
IM-6
220.0
± 10
65
0.79
IM-6
270.0
±5
65
0.79
IM-6
300.0
±5
65
0.79
IM-6
330.0
±5
65
0.79
IM-6
360.0
±5
65
0.79
IM-6
390.0
±5
65
0.79
IM-6
430.0
±5
65
0.79
IM-6
470.0
±5
65
0.79
IM-6
510.0
±5
65
0.79
IM-6
560.0
±5
65
0.79
IM-6
620.0
±5
60
0.79
IM-6
680.0
±5
60
0.79
IM-6
750.0
±5
60
0.79
IM-6
820.0
±5
60
0.79
IM-6
910.0
±5
60
0.79
IM-6
1000.0
±5
60
0.79
IM-8
1100.0
±5
60
0.25
IM-8
1200.0
±5
60
0.25
IM-8
1300.0
±5
60
0.25
IM-8
1500.0
±5
65
0.25
IM-8
1600.0
±5
65
0.25
IM-8
1800.0
±5
65
0.25
IM-8
2000.0
±5
65
0.25
Notes
(1) Measured with full length lead
(2) Rated DC current based on maximum temperature rise as shown in table
PHENOLIC CORE
STANDARD ELECTRICAL SPECIFICATIONS
Document Number: 34030
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IM
www.vishay.com
Vishay Dale
DCR MAX.
()
30.0
31.0
33.0
35.0
38.0
40.0
3.3
3.5
3.8
4.7
5.3
44.0
46.0
48.0
50.0
53.0
56.0
59.0
62.0
65.0
68.0
72.0
RATED DC CURRENT
(mA) (2)
66
64
62
61
58
57
168
162
155
142
132
61
59
58
57
56
54
52
51
50
49
47
IRON CORE
SRF MIN.
(MHz) (1)
2.0
1.9
1.8
1.7
1.6
1.5
13.0
11.7
10.7
9.3
8.3
1.45
1.40
1.35
1.30
1.25
1.20
1.15
1.10
1.05
1.00
0.95
IRON CORE
IND.
TEST FREQUENCY Q
TOL.
Q
MODEL
(μH)
(%)
MIN.
(MHz)
IM-8
2200.0
±5
70
0.25
IM-8
2400.0
±5
70
0.25
IM-8
2700.0
±5
70
0.25
IM-8
3000.0
±5
70
0.25
IM-8
3300.0
±5
70
0.25
IM-8
3600.0
±5
70
0.25
IM-9
68.0
± 10
70
2.5
IM-9
82.0
± 10
65
2.5
IM-9
100.0
± 10
65
2.5
IM-9
120.0
± 10
75
0.79
IM-9
150.0
± 10
75
0.79
IM-10
3900.0
±5
80
0.25
IM-10
4300.0
±5
80
0.25
IM-10
4700.0
±5
80
0.25
IM-10
5000.0
±5
80
0.25
IM-10
5600.0
±5
80
0.25
IM-10
6200.0
±5
80
0.25
IM-10
6800.0
±5
80
0.25
IM-10
7500.0
±5
80
0.25
IM-10
8200.0
±5
80
0.25
IM-10
9100.0
±5
80
0.25
IM-10
10 000.0
±5
80
0.25
Notes
(1) Measured with full length lead
(2) Rated DC current based on maximum temperature rise as shown in table
IRON CORE
STANDARD ELECTRICAL SPECIFICATIONS
MAXIMUM TEMPERATURE RISE
OPERATING TEMPERATURE RANGE
IM-1
0.10 ìH to .47 ìH = 35 °C at + 90 °C ambient
- 55 °C to + 125 °C
0.56 ìH to 1000 ìH = 15 °C at + 90 °C ambient
- 55 °C to + 105 °C
0.022 ìH to 1.0 ìH = 35 °C at + 90 °C ambient
- 55 °C to + 125 °C
IM-2
IM-4
IM-6
1.2 ìH to 27 ìH = 15 °C at + 90 °C ambient
- 55 °C to + 105 °C
33 ìH to 1000 ìH = 15 °C at + 90 °C ambient
- 55 °C to + 105 °C
0.15 ìH to 4.7 ìH = 35 °C at + 90 °C ambient
- 55 °C to + 125 °C
5.6 ìH to 33 ìH = 15 °C at + 90 °C ambient
- 55 °C to + 105 °C
36 ìH to 240 ìH = 15 °C at + 90 °C ambient
- 55 °C to + 105 °C
270 ìH to 1800 ìH = 35 °C at + 90 °C ambient
- 55 °C to + 125 °C
0.1 ìH to 2.7 ìH = 35 °C at + 90 °C ambient
- 55 °C to + 125 °C
3.3 ìH to 1000 ìH = 15 °C at + 90 °C ambient
- 55 °C to + 105 °C
= 15 °C at + 90 °C ambient
- 55 °C to + 105 °C
IM-8, IM-9, IM-10
ORDERING INFORMATION
IM-2
10 μH
± 10 %
ER
e2
MODEL
INDUCTANCE
VALUE
INDUCTANCE
TOLERANCE
PACKAGE
CODE
JEDEC LEAD (Pb)-FREE
STANDARD
GLOBAL PART NUMBER
I
M
0
MODEL
Revision: 21-Feb-12
2
E
R
PACKAGE
CODE
1
0
INDUCTANCE
VALUE
0
K
INDUCTANCE
TOLERANCE
Document Number: 34030
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000