SHD220212 SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4067, REV B HERMETIC POWER MOSFET N-CHANNEL FEATURES: • 30 Volt, 0.019 Ohm MOSFET • Hermetically Sealed • Add a “C” after the SHD for ceramic seals (SHDC220212) • Surface Mount Package MAXIMUM RATINGS ALL RATINGS ARE AT TA = 25°C UNLESS OTHERWISE SPECIFIED. RATING GATE TO SOURCE VOLTAGE CONTINUOUS DRAIN CURRENT VGS = 10V, TC = 25°C VGS = 10V, TC = 100°C PULSED DRAIN CURRENT @ TC = 25°C OPERATING AND STORAGE TEMPERATURE THERMAL RESISTANCE JUNCTION TO CASE TOTAL DEVICE DISSIPATION @ TC = 25°C SYMBOL VGS ID MIN. - TYP. - UNITS Volts Amps - MAX. ± 20 13 9 40 +150 1.7 75 IDM TOP/TSTG RθJC PD -55 - BVDSS 30 - - Volts - - Amps °C °C/W Watts ELECTRICAL CHARACTERISTICS DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 250 μA DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = 7.3A VGS = 4.5V, ID = 3.7A GATE THRESHOLD VOLTAGE VDS = VGS, ID = 250μA ZERO GATE VOLTAGE DRAIN CURRENT, TJ = 25°C (VDS = 30V, VGS = 0V), TJ = 125°C GATE TO SOURCE LEAKAGE FORWARD VGS = 16V GATE TO SOURCE LEAKAGE REVERSE VGS = -16V TOTAL GATE CHARGE VGS = 10V, GATE TO SOURCE CHARGE VDS = 24V, GATE TO DRAIN CHARGE ID = 7.3A TURN ON DELAY TIME VDD = 15V, RISE TIME ID = 7.3A, TURN OFF DELAY TIME RG = 6.2Ω, FALL TIME VGS = 10V DIODE FORWARD VOLTAGE TJ = 25°C, IS = 7.3A VGS = 0V REVERSE RECOVERY TIME TJ = 25°C, IS = 7.3A, di/dt = 100A/μsec, REVERSE RECOVERY CHARGE VDD = 25V INPUT CAPACITANCE VGS = 0V, VDS = 25V, OUTPUT CAPACITANCE f = 1MHz REVERSE TRANSFER CAPACITANCE RDS(ON) VGS(th) IDSS 1.0 - - IGSS - - Qg Qgs Qgd td(ON) tr td(OFF) tf VSD - - - - 20 80 80 80 - trr - Qrr Ciss Coss Crss - Ω 0.019 0.030 3.0 25 250 100 -100 80 20 23 - Volts μA nA nC nsec 1.0 Volts 110 - nsec 300 1640 660 220 - μC ©2003 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • [email protected] • pF SHD220212 SENSITRON DATA SHEET 4067, REV. B MECHANICAL DIMENSIONS: in Inches / mm LCC-5 PINOUT TABLE DEVICE TYPE N Channel Mosfet PIN 1 DRAIN PIN 2 GATE PIN 3 SOURCE DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2003 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • [email protected] •