NT IA PL M ■ *R oH S CO Features ■ ■ ■ Surface Mount 3 mm Square Single-Turn Cermet / Sealed Compatible with surface mount manufacturing processes Rotor stop for “in-circuit” adjustment 100 cycle rotational and seal life Patent #5043695 assembly for seal integrity ■ Plastic housing for RF applications ■ RoHS compliant* - see processing information on lead free surface mount trimmers ■ 3313 - 3 mm Trimming Potentiometer Electrical Characteristics Standard Resistance Range ........................10 ohms to 2 megohms (see standard resistance table) Resistance Tolerance ............±20 % std. End Resistance.......1 % or 3 ohms max. (whichever is greater) Contact Resistance Variation .......................................3 % or 3 ohms Adjustability Voltage Divider...........................±0.1 % Rheostat ....................................±0.2 % Resolution.....................................Infinite Insulation Resistance ................500 vdc. 100 megohms min. Dielectric Strength Sea Level ..................................500 vac 70,000 Feet...............................350 vac Adjustment Angle ...................220° nom. Environmental Characteristics Max. Soldering Exposure ..................................260 °C/5 seconds Power Rating (200 volts max.) 70 °C ....................................0.125 watt 125 °C .........................................0 watt Operating Temp. Range .....................................-55 °C to +125 °C Temperature Coefficient .....................≤100 ohms ±150 ppm/°C; >100 ohms ±100 ppm/°C Seal Test........................85 °C Fluorinert† Humidity .......MIL-STD 202, Method 106 (no vibration) TRS ±3 %; IR 10 megohms Vibration ......20 G TRS ±1 %; VRS ±1 % Shock ........100 G TRS ±1 %; VRS ±1 % Load Life ...............................1000 hours @ 70 °C Rated Power;TRS ± 3 % Rotational Life ......100 cycles TRS ±3 % Thermal Shock ...........................5 cycles TRS ±2 %; VRS ±1 % Physical Characteristics Mechanical Angle ..................250 ° nom. Torque ...............................50 g-cm max. Stop Strength...................200 g-cm min. Pushover Strength (“S” only) ...........1.6 Kilograms (3.5 lbs) minimum Flammability ...........................U.L. 94V-0 Weight...........................Approx. 0.01 oz. Marking ........................Resistance code and date code Wiper................50 % (Actual TR) ±10 % Standard Packaging J Style .......................1000 pcs./7 ” reel S Style.........................200 pcs./7 ” reel Adjustment Tool ..............................H-91 Product Dimensions 3313J-1 3.2 ± 0.2 (.126 ± .008) 2 ADJ. SLOT 0.52 WIDE (.020) 1.93 LONG X (.076) 0.51 DEEP X (.020) 3.5 ± 0.2 (.138 ± .008) 3 1 3313X-1 3.2 ± 0.2 (.126 ± .008) 2 ADJ. SLOT 0.52 WIDE (.020) 1.93 LONG X (.076) 0.51 DEEP X (.020) 3.5 ± 0.2 (.138 ± .008) 1 3 3313X-2 3313J-2 3.2 ± 0.2 (.126 ± .008) 2 ADJ. CROSS SLOT 0.45 WIDE (.018) 0.51 DEEP X (.020) 3.5 ± 0.2 (.138 ± .008) 3 1 1 1.68 (.066) 1.3 ± 0.1 (.051 ± .004) REF. 0.58 (.023) 1.50 ± 0.15 (.059 ± .006) 1.5 ± 0.15 (.059 ± .006) 2 PLCS ADJ. SLOT 0.52 WIDE (.020) 1.93 LONG X (.076) 0.51 DEEP X (.020) 3.5 ± 0.2 (.138 ± .008) 1.42 (.056) 1.68 (.066) 1.47 ± 0.15 (.058 ± .006) 3.2 ± 0.2 (.126 ± .008) 2 3 1.42 (.056) 1.3 ± 0.1 (.051 ± .004) 0.58 (.023) REF. 0.66 ± 0.1 2 PLCS (.026 ± .004) 2.3 ± 0.2 (.091 ± .008) 2.3 ± 0.2 (.091 ± .008) 2.2 ± 0.2 (.087 ± .008) 2.2 ± 0.2 (.087 ± .008) 0.15 (.006) 0.15 (.006) RECOMMENDED LAND PATTERN 1.6 (.063) 1.60 (.063) 1.1 (.043) 0.6 (.024) 1.6 (.063) 0.65 (.026) 2 4.5 (.177) CCW WIPER 3 1 CW CLOCKWISE 1.1 (.043) 0.6 (.024) TOLERANCES: ± 0.25 (.010) EXCEPT WHERE NOTED DIMENSIONS ARE: MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex. †“Fluorinert” is a registered trademark of 3M Co. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 3313 - 3 mm Trimming Potentiometer 3313J/X Packaging Specifications Product Dimensions 3313S-1 Position Rotor As Shown Within ±11° Of Centerline Of Terminal 2 3.61 ± .20 (.142 ± .008) 3.02 (.119) 3 2 3313S-2 1 ADJ. SLOT .52 ± 0.03 WIDE (.020 ± .001) X 1.93 ± 0.03 LONG (.076 ± .001) X .51 ± 0.06 DEEP (.020 ± .002) Position Rotor As Shown Within ±11° Of Centerline Of Terminal 2 3.61 (.142) 3.02 (.119) 3 2 1 ADJ. SLOT .45 ± 0.03 WIDE (.018 ± .001) X 1.93 ± 0.03 LONG (.076 ± .001) X .51 ± 0.06 DEEP (.020 ± .002) 4.0 ± 0.10 (.157 ± .004) .30 ± 0.10 (.012 ± .004) 2.0 ± 0.10 (.079 ± .004) 0.71 ± 0.20 TYP (.028 ± .008) 1.15 TYP (.045) 7.50 ± 0.10 (.295 ± .004) 12.00 ± 0.10 (.472 ± .004) 4.00 ± .10 (.157 ± .004) 1.5 ± 0.10 (.059 ± .004) 3.8 ± 0.2 (.150 ± .008) 1.5 ± 0.20 (.059 ± .008) 1.5 ± .10 DIA. (.059 ± .004) 1.5 ± 0.20 DIA. (.059 ± .008) 1.75 ± 0.10 (.069 ± .004) 12.0 ± 0.20 (.472 ± .008) 16.00 ± .30 (.630 ± .012) TAPE 2.67 (.105) 5.35 (.211) 0.15 ± 0.03 (.006 ± .001) 5° ± 2° 4.20 ± .020 (.165 ± .008) 2.00 ± .010 (.079 ± .004) 178.0 ± 2.03 DIA. (7.008 ± .080) 1.30 (.051) 5.80 ± 0.10 (.228 ± .004) .40 MAX. (.016) 5.52 ± 0.18 (.217 ± .007) 4.0 ± 0.10 (.157 ± .004) 3.71 (.146) 2.77 (.109) 2.50 ± .10 (.098 ± .004) 3313S Packaging Specifications EQUAL SPACED 1.78 (.070) 3 PLCS MIN. 60.0 ± 2.0 (2.362 ± .079) 13.0 ± 0.51 DIA. (.512 ± .020) 21.01 ± 0.79 (.827 ± .031) Meets EIA 481 12.40 + 2.00/ -.000 (.488 + .079/ -.000) 4.10 ± 0.20 (.161 ± .008) TAPE 2.67 (.105) 177.8 ± 2.03 DIA. (7.000 ± .080) EQUAL SPACED 1.78 (.070) 3 PLCS MIN. 13.00 ± 0.51 DIA. (.512 ± .020) 60.0 ± 2.0 (2.330 ± .080) 21.01 ± 0.79 (.827 ± .031) 16.40 + 2.00/ -.000 (.646 + .079/ -.000) REEL REEL Standard Resistance Table 2.39 (.094) TOLERANCES: ± 0.25 (.010) EXCEPT WHERE NOTED DIMENSIONS ARE: RECOMMENDED LAND PATTERN 1.57 1.57 (.062) 3 PLCS (.062) MM (INCHES) How To Order 2.62 (.103) 3313 J - 1 - 502 E Model Style 2.39 (.094) 1.12 2 PLCS (.044) Standard or Modified Product Indicator -1 = Single Slot -2 = Cross Slot Resistance Code Embossed Tape 1000 pcs. / 7 ” Reel (J Style) 200 pcs. / 7 ” Reel (S Style) REV. 02/06 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Resistance (Ohms) 10 20 50 100 200 500 1,000 2,000 5,000 10,000 20,000 50,000 100,000 200,000 500,000 1,000,000 2,000,000 Part Marking Code A1 21 51 A2 22 52 A3 23 53 A4 24 54 A5 25 55 A6 26 Resistance Code 100 200 500 101 201 501 102 202 502 103 203 503 104 204 504 105 205 Popular distribution resistance values listed in boldface. Special resistances available.