PL IA NT Features S CO M ■ *R oH ■ ■ ■ ■ Applications Lead free as standard RoHS compliant* Low power loss & high efficiency High current capability Low profile package ■ ■ ■ ■ AC operated products Computer monitors Set top boxes Cable modems CD2320-B1200~B11000 Surface Mount Bridge Rectifier Diode General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Bourns offers Bridge Rectifier Diodes for rectification applications, in compact chip package 2320 size format, which offer PCB real estate savings and are considerably smaller than most competitive parts. The Bridge Rectifier Diodes offer a forward current of 1 A with a choice of repetitive peak reverse voltages between 200 V and 1000 V. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) CD2320Parameter Symbol Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Unit B1200 B1400 B1600 B1800 B11000 VRRM 200 400 600 800 1000 V VRMS 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 200 400 600 800 1000 V Maximum Average Forward Rectified Current (TA = 55 °C) I(AV) 1.0 A DC Reverse Current @ Rated DC Blocking Voltage (@TJ = 25 °C) IR 5 µA DC Reverse Current @ Rated DC Blocking Voltage (@TJ = 150 °C) IR 200 µA Typical Junction Capacitance1 CJ 25 pF Maximum Instantaneous Forward Voltage @ 1 A VF 1 V RθJL 110 °C/W IFSM 30 A Typical Thermal Resistance 2 Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Notes: 1 Measured @ 1.0 MHz and applied reverse voltage of 4.0 VDC. 2 Thermal resistance from junction to ambient and from junction to lead P.C.B. mounted on 0.2 ˝ x 0.2 ˝ (5.0 mm x 5.0 mm) copper pad areas. Thermal Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Operating Temperature Range Storage Temperature Range Symbol CD2320-B1200~B11000 Unit TJ -55 to +175 °C TSTG -55 to +175 °C *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. CD2320-B1200~B11000 Surface Mount Bridge Rectifier Diode Product Dimensions This is a lead free product, packaged with FRP substrate and is epoxy underfilled. The terminals are pure tin plated (lead free) and are solderable per MIL-STD-750, Method 2026. The package weighs approximately 0.07 g. The package and dimensions are shown below. A Dimensions B A 5.20 - 5.40 (0.205 - 0.213) B 4.10 - 4.30 (0.161 - 0.169) C 5.70 - 5.90 (0.224 - 0.232) D 1.00 - 1.20 (0.039 - 0.047) E 0.85 - 0.95 (0.033 - 0.037) F 1.10 - 1.30 (0.043 - 0.051) F C MM DIMENSIONS: (INCHES) D E How To Order CD 2320 - B 1 800 Recommended Footprint Common Code Chip Diode Package • 2320 = 23 ˝ x 20 ˝ Model B = Schottky Rectifier Series Current 1=1A Working Peak Reverse Voltage 800 = 800 VRWM (Volts) 4.10 - 4.30 (0.161 - 0.169) Typical Part Marking 7.42 MAX. (0.292) MANUFACTURER'S TRADEMARK FORWARD CURRENT x 100 mA VRMS = 800 V DATE CODE 1.60 (0.063) 1.00 (0.040) DIMENSIONS: MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. CD2320-B1200~B11000 Surface Mount Bridge Rectifier Diode Rating and Characteristic Curves Average Forward Rectified Current (Amps) Forward Current Derating Curve Maximum Non-Repetitive Peak Forward Surge Current Peak Forward Surge Current (Amps) 1.0 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 40 35 30 25 20 15 10 Pulse Width 8.3 ms Single Half Sine-Wave (JEDEC Method) 5 0 175 10 1 Ambient Temperature (°C) Forward Characteristics Reverse Characteristics 100 Instantaneous Reverse Current (mA) 10.00 Instantaneous Forward Current (Amps) 100 Number of Cycles at 60 Hz 1.00 0.10 TJ = 100 °C 10.0 1.0 TJ = 25 °C 0.10 TJ = 25 °C Pulse Width = 300 µS 0.01 0.2 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Typical Junction Capacitance Junction Capacitance (pF) 100 TJ = 25 °C 10 1 0.1 0.2 0.4 1.0 2 4 10 Reverse Voltage (Volts) 20 0 20 40 60 80 100 120 Percent of Rated Peak Reverse Voltage (%) Instantaneous Forward Voltage (Volts) 40 100 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 140 CD2320-B1200~B11000 Surface Mount Bridge Rectifier Diode Packaging Information The surface mount product is packaged in an 12 mm x 8 mm tape and reel format per EIA-481 standard. P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P A Trailer C Device Leader ....... ....... ....... ....... ....... ....... ....... ....... End 10 pitches (min.) 10 pitches (min.) W1 Start DIMENSIONS: MM (INCHES) Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel — 2320 5.90 ±0.10 (0.232 - 0.004) 6.50 ±0.10 (0.256 - 0.004) 1.50 ±0.10 (0.059 - 0.004) 1.55 ±0.05 (0.061 - 0.002) 330 (12.992) 50.0 Min. (1.969) 13.0 ±0.20 (0.512 - 0.008) 1.75 ±0.10 (0.069 - 0.004) 5.50 ±0.05 (0.217 - 0.002) 8.00 ±0.10 (0.315 - 0.004) 4.00 ±0.10 (0.157 - 0.004) 2.00 ±0.05 (0.079 - 0.002) 0.20 ±0.10 (0.008 - 0.004) 12.00 ±0.20 (0.472 - 0.008) 18.7 Max. (0.736) 5,000 Reliable Electronic Solutions Asia-Pacific: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116 Europe: Tel: +41-41 768 5555 • Fax: +41-41 768 5510 The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700 www.bourns.com 07/06 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. COPYRIGHT© 2005, BOURNS, INC. LITHO IN U.S.A. IPA0610 06/05