TO-5 Double-Balanced Mixer, 5 - 500 MHz Features MAC-51 V3 TO-5-2 Convenient Microstrip or Stripline Mounting Low Conversion Loss: 7 dB Impedance: 50 Ohms Nominal Maximum Input Power: 300 mW max. @ 25°C, Derated linearly to 85°C @ 3.2 mW/°C • IF Port Current: 50 mA Max. • MIL-STD-883 Screening Available • • • • Description Transformers convert the LO and RF paths to balanced lines connecting to a low barrier, Schottky diode ring quad. These transformers help provide excellent isolation between ports. Conversion Loss is low. The direct connection of the IF port to the diode quad allows these mixers to be used as phase detectors and bi-phase modulators. Pin Configuration Pin No. Function Pin No. Function 1 LO 3 RF 2 IF 4 GND 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. TO-5 Double-Balanced Mixer, 5 - 500 MHz MAC-51 V3 Electrical Specifications1: TA = -55°C to +85°C Parameter Test Conditions Frequency Units Min Typ Max Frequency Range RF, LO Ports IF Port 5 - 500 DC - 500 MHz MHz — — — — — — — dB — — 7.0 LO to RF 5 - 50 MHz 50 - 500 MHz dB dB 35 25 — — — — LO to IF 5 - 50 MHz 50 - 500 MHz dB dB 35 25 — — — — RF to IF 5 - 50 MHz 50 - 500 MHz dB dB 20 20 — — — — Negative — — — — — mV — <3 — dBm dBm — — +2 -1.5 — — — — — — Conversion Loss Isolation DC Polarity DC Offset RF Input2 1 dB Compression 1 dB Desensitization SSB Noise Figure Within 1 dB of Conversion Loss Max. — 1. All specifications apply when operated at +7 dBm available LO power with 50 ohm source and load impedance. 2. Measured at 100 MHz 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. TO-5 Double-Balanced Mixer, 5 - 500 MHz MAC-51 V3 Typical Performance Curves Ordering Information Part Number Package MAC-51 PIN TO-5-2 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.