MA-COM MAAV-007092

MAAV-007092-000100
Voltage Variable Absorptive
Attenuator, 800 - 1000 MHz
Rev. V2
Functional Schematic
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Input IP3: +35 dBm Min (Full Attenuation Range)
Input IP3 is 15 -20 dB Better than GaAs
Linear Operation: +20 dBm Typ.
Plastic, 28 Lead, 6 mm CSP, SMT Package
35 dB Dynamic Range (With 30 mA Bias Current)
Single Control Voltage
50 ohm Impedance
Linear Driver, MADR-007098-000100, Available
Test Boards are Available
Tape and Reel Packaging Available
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of MAAVCC0001
Description
M/A-COM's MAAV-007092-000100 is a PIN diode
based voltage variable attenuator. This device is in a
6mm square, 28 lead, plastic CSP Package, suitable
for surface mounting on PCBs. These attenuators
have linear operating power and input intercept point
levels 15 - 20 dB better than GaAs FET MMIC
voltage variable attenuators. They are ideally suited
for use where low distortion, high linear operating
power and high dynamic range are required. These
devices are optimized for the GSM frequency band,
but exhibit excellent performance and repeatability
over the entire specified frequency band. The
MAAV-007092-000100 is ideally suited for wireless
communications systems.
Pin Configuration2
Pin #
Function
Pin #
Function
1
N/C
15
N/C
2
N/C
16
N/C
3
N/C
17
N/C
4
N/C
18
N/C
5
N/C
19
N/C
6
N/C
20
N/C
7
N/C
21
N/C
8
N/C
22
N/C
23
BIAS 1
N/C
Ordering Information
Part Number
Package
MAAV-007092-000100
Bulk Packaging
MAAV-007092-0001TR
1000 piece reel
MAAV-007092-0001TB
Sample Test Board
Note: Reference Application Note M513 for reel size
information.
1
9
BIAS
10
N/C
24
11
N/C
25
N/C
12
GND
26
GND
13
RF OUT
27
RF IN
14
GND
28
GND
1. Bias current may be applied to Pin 9 or 23. However, the
unused Pin must be isolated.
2. The exposed pad centered on the package bottom must be
connected to RF and DC ground. (For PQFN Packages)
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAAV-007092-000100
Voltage Variable Absorptive
Attenuator, 800 - 1000 MHz
Rev. V2
Electrical Specifications: TA = 25°C
Parameter
Test Conditions
Frequency
Units
Min.
Typ.
Max.
Insertion Loss
0 volts
800-1000 MHz
925 - 960 MHz
dB
dB
—
—
3.6
3.5
4.2
3.9
Attenuation
(Above Loss)
10 mA bias current
800-1000 MHz
925 - 960 MHz
dB
dB
30
30
34
34
—
—
800-1000 MHz
925 - 960 MHz
dB
dB
—
—
2.3
0.4
3.0
0.8
Attenuation
Flatness
0 to 30 dB attenuation
VSWR
0 to 30 dB attenuation
800-1000 MHz
925 - 960 MHz
Ratio
Ratio
—
—
1.5:1
1.3:1
1.9:1
1.8:1
Switching Speed
50% Control to 90%/10% RF
800-1000 MHz
µs
—
—
10.0
Linear Operation
—
800-1000 MHz
dBm
—
+20
—
Input IP3
Two-tone inputs up to +10 dBm
800-1000 MHz
dBm
+35
+40
—-
I Control
—
800-1000 MHz
mA
—
—
30
Absolute Maximum Ratings 3,4
Parameter
Absolute Maximum
Max. Input Power
+27 dBm
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +125°C
Recommended PCB Layout
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. M/A-COM does not recommend sustained operation near
these survivability limits.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAAV-007092-000100
Voltage Variable Absorptive
Attenuator, 800 - 1000 MHz
Rev. V2
Typical Performance Curves
Typical VSWR @ +25°C
Insertion Loss
+ 2 5 °C
+ 8 5 °C
15 d B
1.8
4.0
1.6
VSWR (Ratio)
Lo ss (dB)
- 4 0 °C
4.5
3.5
3.0
3 0 dB
R ef
1.4
1.2
2.5
800
850
900
950
1
800
1000
850
Frequency (MHz)
Attenuation Flatness @ +25°C
5 dB
10 d B
900
950
1000
Fre que ncy (MHz )
Attenuation vs. Bias Current,
Frequency = 1000 MHz
2 0 dB
3 0 dB
- 4 0 °C
1.5
+ 2 5 °C
+ 8 5 °C
42
A ttenua tio n (dB )
Flatness (dB)
1.0
0.5
0.0
-0.5
-1.0
-1.5
800
850
900
950
Fre que ncy (MHz )
1000
36
30
24
18
12
6
0
0
1
2
3
4
5
6
7
8
9
10
Bias Current (mA)
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAAV-007092-000100
Voltage Variable Absorptive
Attenuator, 800 - 1000 MHz
Rev. V2
CSP-8, 28 Lead, 6mm
Package outline conforms to JEDEC standard MO-220B.
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.