Two-Way Power Divider 1000 - 2000 MHz DS-332 V2.00 TO-8-2 Features ● 2° Phase Balance Typical ● 20 dB Typical Midband Isolation ● 1.25:1 Typical Midband VSWR, Input Guaranteed Specifications* Frequency Range (From -55°C to +85°C) 1000 - 2000 MHz Insertion Loss (Less coupling) 0.5 dB Max Isolation 10 dB Min Amplitude Balance 0.2 dB Max Phase Balance 6° Max VSWR (All Ports) Input Output 1.7:1 Max 1.4:1 Max Operating Characteristics Impedance 50 Ohms Nominal Maximum Power Rating or Input Power Internal Load Dissipation 1 Watt Max 0.1 Watt Max Environmental MIL-STD-202 screening available. (;P5 Output C; P9, Output D; P1 Pins P2, P4, P6 & P8 are ground. Pin Configuration *All specifications apply with 50 ohm source and load impedance. Ordering Information Part No. DS-332 Package TO-8-2 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. 6-38 DS-332 Two-Way Power Divider V2.00 Typical Performance INSERTION LOSS ISOLATION VSWR M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. 6-39