MA-COM DSS-333

Surface Mount Two-Way Power Divider,
10 - 500 MHz
DSS-333
V3
Features
•
•
•
•
•
•
•
•
SF-1
Fully Hermetic Package
Phase Balance: 0.5o Typical
Isolation: 40 dB Typical Midband
VSWR: 1.05:1 Typical Midband
Impedance: 50 Ohms Nominal
Maximum Power Rating or Input Power: 1 Watt Max.
Internal Load Dissipation: 0.05 Watts Max.
MIL-STD-202 Screening Available
Description
A Power Divider is ideally a lossless reciprocal
device which can also perform vector summation of two
or more signals and thus is sometimes called a power
combiner or summer.
Pin Configuration
Pin No.
Function
Pin No.
Function
1
Σ IN
3
GND
2
Output C
4
Output D
Electrical Specifications1: TA = -55°C to +85°C
Parameter
Test Conditions
Frequency
Units
Min
Typ
Max
Insertion Loss
Less Coupling
10 - 500 MHz
dB
—
—
0.6
Isolation
—
10 - 500 MHz
dB
25
—
—
Amplitude Balance
—
10 - 500 MHz
dB
—
—
0.15
Phase Balance
—
10 - 500 MHz
°
—
—
2
VSWR
All Ports
10 - 500 MHz
Ratio
—
—
1.4:1
1. All specifications apply with 50 ohm source and load impedance.
This product contains elements protected by United States Patent Number 3,428,920.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Surface Mount Two-Way Power Divider,
10 - 500 MHz
DSS-333
V3
Typical Performance Curves
Insertion Loss
VSWR
Isolation
Ordering Information
Part Number
Package
DSS-333 PIN
SF-1
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.