MAAV-007091-000100 Voltage Variable Absorptive Attenuator, 1700 - 2200 MHz Rev. V3 Functional Schematic Features • • • • • • • • • • • • • • Input IP3: +31 dBm Min (Full Attenuation Range) Input IP3 is 15 -20 dB Better than GaAs Linear Operation: +20 dBm Typ. Plastic, 28 Lead, 6 mm CSP, SMT Package 35 dB Dynamic Range (With 30 mA Bias Current) Single Control Voltage 50 ohm Impedance Linear Driver, MADR-007098-000100, Available Test Boards are Available Tape and Reel Packaging Available 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of MAAVCC0002 Description M/A-COM's MAAV-007091-000100 is a PIN diode based voltage variable attenuator. This device is in a 6mm square, 28 lead, plastic CSP package, suitable for surface mounting on PCBs. These attenuators have linear operating power and input intercept point levels 15 - 20 dB better than GaAs FET MMIC voltage variable attenuators. They are ideally suited for use where low distortion, high linear operating power and high dynamic range are required. These devices are optimized for the PCS and UMTS frequency bands, but exhibit excellent performance and repeatability over the entire specified frequency band. The MAAV-007091-000100 is ideally suited for wireless communications systems. Pin Configuration2,3 Pin # Function Pin # Function 1 NC 15 NC 2 NC 16 NC 3 NC 17 NC 4 NC 18 NC 5 NC 19 NC 6 NC 20 NC 7 NC 21 NC 8 NC 22 NC 9 BIAS 1 23 BIAS 1 Package 10 NC 24 NC MAAV-007091-000100 Bulk Packaging 11 NC 25 NC MAAV-007091-0001TR 1000 piece reel 12 GND 26 GND 13 RFOUT 27 RFIN MAAV-007091-0001TB Sample Test Board 14 GND 28 GND Ordering Information Part Number Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1. Bias current may be applied to Pin 9 or 23. However, the unused pin must be isolated. 2. The exposed pad centered on the package bottom must be connected to RF and DC ground. (For PQFN packages) 3. It is preferable to ground all “NC” pins, except for the unused bias pin, which must be left open. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAV-007091-000100 Voltage Variable Absorptive Attenuator, 1700 - 2200 MHz Rev. V3 Electrical Specifications: TA = 25°C Parameter Test Conditions Frequency Units Min. Typ. Max. Insertion Loss 0 volts 1700-2200 MHz dB — 2.9 4.0 Attenuation (Above Loss) 10 mA bias current 1700-2200 MHz dB 30 33 — Attenuation Flatness 0 to 30 dB attenuation 1700-2200 MHz dB — 1.0 2.0 VSWR 0 to 30 dB attenuation 1700-2200 MHz Ratio — 2:1 2.2:1 Switching Speed 50% Control to 90%/10% RF 1700-2200 MHz µs — — 3.0 Linear Operation — 1700-2200 MHz dBm — +20 — Input IP3 Two-tone inputs up to +10 dBm 1700-2200 MHz dBm +31 —- — P1 dB Full Attenuation Range 1700-2200 MHz dBm — +23 — I Control — 1700-2200 MHz mA — —- 30 Absolute Maximum Ratings 4 Parameter 4. Absolute Maximum Recommended PCB Layout Max. Input Power 1700 - 2200 MHz +27 dBm Operating Temperature -40°C to +85°C Storage Temperature -65°C to +125°C Exceeding any one or combination of these limits may cause permanent damage to this device. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAV-007091-000100 Voltage Variable Absorptive Attenuator, 1700 - 2200 MHz Rev. V3 Typical Performance Curves (beyond 2GHz) Typical Performance Curves Insertion Loss Insertion Loss @ 25°C - 4 0 °C 2 5 °C 8 5 °C 3.9 4.0 3.7 Insertion Loss (dB) Loss (dB) 3.5 3.0 2.5 2.0 1.5 1700 1750 1800 1850 1900 1950 3.5 3.3 3.1 2.9 2.7 2.5 2000 2000 2050 Frequency (MHz) 10 d B 2150 2200 Attenuation Flatness @ 25°C Attenuation Flatness @ +25°C 5 dB 2100 Fre que ncy (MHz) 2 0 dB 3 0 dB 3 0 dB 1.0 2 0 dB 10 d B 5 dB 0.4 0.8 0.2 0 0.4 Flatness (dB) Flatness (dB) 0.6 0.2 0.0 -0.2 -0.4 -0.6 -0.4 -0.6 -0.8 -1 -0.8 -1.0 1700 -0.2 -1.2 1750 1800 1850 1900 1950 -1.4 2000 2000 2050 Fre que ncy (MHz ) Typical VSWR @ +25°C R ef 3 0 dB 15 d B 2200 Lo ss 5 dB 10 d B 3 0 dB 2.2 V SW R (R a tio ) VSWR (Ratio) 2150 Typical VSWR @ +25°C 1.8 1.6 1.4 1.2 1 1700 2100 Fre que ncy (MHz ) 1750 1800 1850 1900 Frequency (MHz) 1950 2000 2 1.8 1.6 1.4 1.2 1 2000 2050 2100 2150 2200 Frequency (MHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAV-007091-000100 Voltage Variable Absorptive Attenuator, 1700 - 2200 MHz Rev. V3 Attenuation vs. Bias Current, Frequency = 2000 MHz - 4 0 °C + 2 5 °C + 8 5 °C 1 3 5 A ttenua tio n (dB) 40 30 20 10 0 0 2 4 6 7 8 9 10 Bias Current (mA) CSP-8, 28 Lead, 6mm Package outline conforms to JEDEC standard MO-220B. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.