Analog 1310 nm MQW-DFB Laser Diode Module C-13-DFBA-PX-SXXXI/XXX-X Features • Laser diode with multi-quantum-well structure • Un-cooled operation at -20 to +85ºC • Built-in InGaAs monitor photodiode • Hermetically sealed active component • Complies with Telcordia Technologies GR-468-CORE • Single frequency operation with high SMSR • Fiber pigtailed package with optional FC/ST/SC/MU/LC connector • Design for Analog fiber-optics application Absolute Maximum Rating (Tc=25ºC) Parameter Symbol Value Unit Pf 2.5(H)/4(2) mW V Fiber Output Power H&2 Reverse Voltage VRLD 2 PD Reverse Voltage VRPD 20 V PD Forward Current IFPD 2.0 mA Operating Temperature Topr -20 to +85 ºC Storage Temperature Tstg -40 to +85 ºC (All optical data refer to a coupled 9/125µm SM fiber) Optical and Electrical Characteristics( T=25ºC ) Parameter Symbol Min Typical Max Unit Test Condition Threshold Current Ith - 10 20 mA CW Operating Current Iop - 20 40 mA CW, Pf=Pf(Min) Optical Output Power H 2 Pf 1 2 - 2 - mW CW, Ith+20mA, kink free Operating Voltage VF - 1.2 1.8 V CW, Pf=Pf(Min) Peak Wavelength λ 1280 1310 1335 nm CW, Pf=Pf(Min), RMS(-20dB) TC=-20~85ºC Side mode Suppression Ratio Sr dB CW,Pf=Pf(Min), -20 to 85ºC mW/mA CW, Pf=Pf(Min) dB -20<Tc<85ºC Ibias=Ith ,10% to 90% Slope Efficiency H 2 Se 30 40 - 0.05 - 0.1 0.1 - - 45 - - 30 - - Optical Isolation OI Rise Time/Fall Time tr/tf - - 0.5 ns Relative Intensity Noise RIN - -150 -145 dB/Hz CW Second Order Distortion SSO - - -40 dBc Note 1 Third Order Distortion STO - - -50 dBc Note 1 Im 100 - - µA CW, Pf=Pf(Min),VRPD=2V IDARK - - 1.0 µA VRPD=5V C - 6 15 pF VRPD=5V, f=1MHz ∆Pf /Pf -1.5 - 1.5 dB APC, -20 to +85ºC Monitor Current Monitor Dark Current Photodiode Capacitance Tracking Error Note1.The laser is modulated with two-carrier tones (f1=13MHz,f2=19MHz) at OMI=15% per carrier tone LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 1 LUMNDS537-MAY2405 rev. A.2 Analog 1310 nm MQW-DFB Laser Diode Module C-13-DFBA-PX-SXXXI/XXX-X Pin Assignment Units in mm. D Type B Type CASE LD PD Pin Pin Pin Pin LUMINENTOIC.COM 1 2 3 4 : : : : Monitor Diode Anode Laser Anode and Case Gnd Laser Cathode Monitor Diode Cathode Pin Pin Pin Pin 1 2 3 4 : : : : Laser Anode and Monitor Diode Cathode Case Gnd Laser Cathode Monitor Diode Anode 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 2 LUMNDS537-MAY2405 rev. A.2 Analog 1310 nm MQW-DFB Laser Diode Module C-13-DFBA-PX-SXXXI/XXX-X Ordering Information C-13-DFBA-PX-SXXXI/XXX-X Wavelength 13=1310nm Analog Package Connector Pin Assignment Fiber Output Power P=Pigtail B = B Type D = DType FC/ST/SC/MU/LC/- H&2 "I" = Isolator PC Fiber APC APC Fiber Flange type (-;O;V;K) Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notice IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at LuminentOIC’s sole and absolute discretion. LuminentOIC warrants performance of its products to current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated as “preliminary” are given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company’s Terms and Conditions of Sale for further warranty information. LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and LuminentOIC makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that LuminentOIC is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. © LuminentOIC, Inc. 2004 All rights reserved LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 3 LUMNDS537-MAY2405 rev. A.2