1310nm Emitting,1490nm Receiving (PIN-TIA, 3.3V), Bi-directional Diplexer Optical Module C-13/14-FXX-PX-SXXX/XXX-XX Features • Single fiber bi-directional operation • Laser diode with multi-quantum-well structure • Low threshold current • InGaAs/InP PIN Photodiode with trans-impedance amplifier • High sensitivity with AGC* • Differential ended output • Single +3.3V Power Supply • Integrated WDM coupler • Un-cooled operation from -40ºC to +85ºC • Hermetically sealed active component • Single mode fiber pigtailed with optical FC/ST/SC/MU/LC connector • Design for fiber optic networks • RoHS Compliant available Absolute Maximum Rating (Tc=25ºC) Parameter Fiber Output Power Symbol Value Unit Pf 1(L) / 1.5(M) / 2.5(H) mW L/M/H LD Reverse Voltage VRLD 2 V PIN-TIA Voltage VCC 4.5 V Operating Temperature Topr -40 to +85 ºC Storage Temperature Tstg -40 to +85 ºC (All optical data refer to a coupled 9/125µm SM fiber) Optical and Electrical Characteristics( Tc=25ºC) Parameter Laser Diode Optical Output Power L M H Symbol Min Typical Max Unit Test Condition Pf 0.2 0.5 1 0.35 0.75 1.6 0.5 1 - mW CW, Ith+20mA , kink free λ 1290 1310 1330 nm CW, Pf=Pf(Min) Spectrum Width (RMS) ∆λ - - 3 nm CW, Pf=Pf(Min) Threshold Current Ith - 10 15 mA CW Peak Wavelength Forward Voltage Rise/Fall Time VF - 1.2 1.5 V CW, Pf=Pf(Min) tr/ tf - - 0.3 ns Ibias=Ith ,10% to 90% Monitor Diode Monitor Current Im 100 - - µA CW, Pf=Pf(Min),VRPD=2V Dark Current IDARK - - 0.1 µA VRPD=5V Capacitance Ct - 6 15 pF VRPD=5V, f=1MHz ∆Pf/Pf -1.5 - 1.5 dB APC, -40 to +85ºC Module Tracking Error Optical Crosstalk CRT < -45 dB Note: 1.Pin assignment can be customized. 2.Specifications subject to change without notice. LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 1 LUMNDS1545-FEB0906 rev. A.0 1310nm Emitting,1490nm Receiving (PIN-TIA, 3.3V), Bi-directional Diplexer Optical Module C-13/14-FXX-PX-SXXX/XXX-XX Detector λ=1480-1500nm DC Electrical Characteristics( Tc=25ºC) Parameter Symbol Min Typical Max Unit Power Supply Vcc 3.0 3.3 3.6 V Differential Output Voltage Vd Supply Current (no load) Icc F02 - - 1000 F04 - 260 450 F06 185 250 415 F02 - - 35 F04 - 21 30 F06 - 26 50 Test Condition mV mA AC/Optical and Electrical Characteristics( Tc=25ºC) Parameter Symbol Detection Range F02 Gain @ 10 Mbps Differential Bandwidth Saturation Power Sensitivity Output Resistance LUMINENTOIC.COM G BW Psat Sens. Rout Min Typical Max Unit Test Condition 1480 - 1500 nm - 52 - 70 V/mW Measure differentially, AC coupled, RL=50Ω Measure differentially, AC coupled, RL=50Ω F04 6 7 - F06 1.92 2.5 3.4 F02 120 140 - F04 404 470 - F06 700 920 1100 F02 -3 0 - F04 -7 -6 - F06 -3 - - BER<10-12 @1.25Gbps PRBS 27-1,Er=10dB F02 - -38 -35 BER<10-10 @155Mbps PRBS 223-1,Er=10dB F04 - -33 -30 F06 - -26 -23 F02 - 50 - F04 48 50 52 F06 48 50 62 Measure differentially with 30uAp-p signal MHz BER<10-10 @155Mbps PRBS 223-1,Er=10dB dBm dBm BER<10-10 @622Mbps PRBS 223-1,Er=10dB BER<10-10 @622Mbps PRBS 223-1,Er=10dB BER<10-12 @1.25Gbps PRBS 27-1,Er=10dB ohm 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 2 LUMNDS1545-FEB0906 rev. A.0 1310nm Emitting,1490nm Receiving (PIN-TIA, 3.3V), Bi-directional Diplexer Optical Module C-13/14-FXX-PX-SXXX/XXX-XX Pin Assignment Pin Assignment PIN-TIA Pin Assignment LD Pin Assignment A Type D Type Pin 1 : Laser Cathode Pin 2 : Laser Anode and Case Gnd Pin 3 : Monitor Diode Anode Pin 4 : Monitor Diode Cathode Pin 1 : Laser Anode and Monitor Diode Cathode Pin 2 : Case Gnd Pin 3 : Laser Cathode Pin 4 : Monitor Diode Anode Functional Schematic Outline Demensions Units in mm. Part Number: C-13/14-FXX-PX-SXXX/XXX-XX Top view 4.9~5.7 19.4 FC:FC/PC PIN-TIA PC (SR=20) LD 1000 Left side view +200 +0 Front view DIMENSION: A:7.0~7.6 mm (Low & Middle power) A:9.3~9.9 mm (High power) LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 3 LUMNDS1545-FEB0906 rev. A.0 1310nm Emitting ,1490nm Receiving (PIN-TIA, 3.3V), Bi-directional Diplexer Optical Module C-13/14-FXX-PX-SXXX/XXX-XX Ordering Information C-13/14-FXX-PX-SXXX/XXX-XX 1310nm Transmitter 1490nm Receiver Package P=Pigtail 02: 155 Mb/s PIN-TIA +3.3V 04: 622 Mb/s PIN-TIA +3.3V 06: 1250 Mb/s PIN-TIA +3.3V Connector FC/ST/SC/MU/LC/- Pin Assignment "-"=A Type D =D Type - : PC Fiber APC : APC Fiber Fiber Output Power L/M/H RoHS Compliant -/G5/GR Blank = RoHS non-compliant product G5 = RoHS 5/6-compliant product (lead exemption) GR = Full RoHS compliant product (no exemption) Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notice IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at LuminentOIC＇s sole and absolute discretion. LuminentOIC warrants performance of its products to current specifications only in accordance with the company＇s standard one-year warranty; however, specifications designated as “preliminary＂ are given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company＇s Terms and Conditions of Sale for further warranty information. LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and LuminentOIC makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS＂ BASIS. Customer agrees that LuminentOIC is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. © LuminentOIC, Inc. 2006 All rights reserved LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 4 LUMNDS1545-FEB0906 rev. A.0