155 Mbps DFB Laser Single Mode Transceiver (Ultra-LR) C-15-155-TDFB(3)-SXX10(12) Features • Duplex SC Single Mode Transceiver • Industry Standard 1x9 Footprint • Ultra Long reach SONET OC-3 SDH STM-1 Compliant • Single +3.3V/+5V Power Supply • LVPECL/PECL Differential Inputs and Outputs • Wave Solderable and Aqueous Washable • Class 1 Laser Int. Safety Standard IEC 825 Compliant • Operating at 0 to 70ºC • Uncooled laser diode with MQW sturcture • Complies with Telcordia (Bellcore) GR-468-CORE • ATM 155 Mbps Links application • SONET/SDH Equipment Interconnect application • RoHS compliance options available Absolute Maximum Rating Parameter Symbol Min. Max. Unit Note Power Supply Voltage Vcc 0 3.6 V C-15-155-TDFB3-SXX10(12) Power Supply Voltage Vcc 0 6 V C-15-155-TDFB-SXX10(12) Output Current Iout 0 30 mA Soldering Temperature - - 260 ºC Operating temerature Topr 0 70 ºC 10 seconds on leads only Storage Temperature Tstg -40 85 ºC Symbol Min. Typ. Max. Unit Vcc 3.1 3.3 3.5 V 1 Power Supply Voltage Vcc 4.75 5 5.25 V Operating Temperature Topr 0 - 70 ºC - - 155 - Mbps Recommended Operating Condition Parameter Power Supply Voltage1 Data Rate Note 1 : Please refer to ordering information LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 1 LUMNDS813-Jul0706 Rev A.2 155 Mbps DFB Laser Single Mode Transceiver (Ultra-LR) C-15-155-TDFB(3)-SXX10(12) Transmitter Specifications Parameter Symbol Min Typical Max Unit Notes Optical Transmit Power Po -3 - +3 dBm C-15-155-TDFB(3)-SXX10 Optical Transmit Power Po 0 - +5 dBm C-15-155-TDFB(3)-SXX12 Output center Wavelength λ 1500 1550 1600 nm Side Mode Suppression Ratio Sr 30 35 - dB CW, Po = 5mW Output Spectrum Width ∆λ - - 1 nm -20 dB width Extinction Ratio ER 8.2 - - dB Optical Output Pulse Mask Compliant with FDDI SMR-PMD1 Output Eye Compliant with ITU recommendation G.957 Optical Rise Time tr - - 2 ns 10% to 90% Values Optical Fall Time tf - - 2 ns 10% to 90% Values RIN - - -116 dB/Hz TJ - - 1.2 ns Relative Intensity Noise Total Jitter Transmitter Specifications Parameter Symbol Min Typical Max Unit ICC - - 180 mA Data Input Current-Low IIL -350 - - µA Data Input Current-High IIH - - 350 µA Notes Electrical Power Supply Current Differential Input Voltage VIH-VIL 300 - - mV Data Input Voltage-Low VIL-VCC -2.0 - -1.58 V Data Input Voltage-High VIH-VCC -1.1 - -0.74 V LUMINENTOIC.COM Maximum current is specified at Vcc= Maximum @ maximum temperature These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 2 LUMNDS813-Jul0706 Rev A.2 155 Mbps DFB Laser Single Mode Transceiver (Ultra-LR) C-15-155-TDFB(3)-SXX10(12) Receiver Specifications Parameter Symbol Min Typical Max Unit Notes - - - -37 dBm Measured with 223-1 PRBS with 72 ones and 72 zeros. Maximum Input Power Pin 0 - - dBm Signal Detect-Asserted Pa - - -37 dBm Measured on transition: low to high Signal Detect-Deasserted Pd -47 - - dBm Measured on transition: high to low Optical Sensitivity Signal Detect-Hysteresis Wavelength of Operation 1.0 - 4.0 dB 1100 - 1600 nm Min Typical Max Unit Receiver Specifications Parameter Symbol Note Electrical ICC - - 100 mA Data Output Voltage-Low VOL -Vcc -2.0 - -1.58 V Data Output Voltage-High VOH- Vcc -1.1 - -0.74 V Signal Detect Output Voltage-Low VSDL-Vcc -2 - -1.58 V Signal Detect Output Voltage-High VSDH- Vcc 1.1 - 0.74 V Power Supply Current LUMINENTOIC.COM The current excludes the output load current These outputs are compatible with 10K, 10KH and 100KECL and PECL outputs 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 3 LUMNDS813-Jul0706 Rev A.2 155 Mbps DFB Laser Single Mode Transceiver (Ultra-LR) C-15-155-TDFB(3)-SXX10(12) Connection Diagram 1. (Rx GND) 2. (Rx +) 3. (Rx-) 4. (SD) 5. (Rx Vcc) 6. (Tx Vcc) 7. (TX-) 8. (TX+) 9. (Tx GND) NC Top View NC Receiver Signal Ground Receiver Data Out Receiver Data Out Bar Signal Detect Receiver Power Supply Transmitter Power Supply Transmitter Data In Bar Transmitter Data in Transmitter Signal Ground PIN Symbol Notes 1 RxGND 2 RD+ See recommended circuit schematic 3 RD- See recommended circuit schematic Directly connect this pin to the receiver ground plane 4 SD 5 RxVcc DC power for the receiver section 6 TxVcc DC power for the transmitter section 7 TD- See recommended circuit schematic 8 TD+ See recommended circuit schematic 9 TxGND LUMINENTOIC.COM Active high on this indicates a received optical signal Directly connect this pin to the transmitter ground plane 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 4 LUMNDS813-Jul0706 Rev A.2 155 Mbps DFB Laser Single Mode Transceiver (Ultra-LR) C-15-155-TDFB(3)-SXX10(12) Recommended Circuit Schematic Tx Vcc C5 Rx Vcc 7 6 5 9 8 R1 4 3 2 1 R3 R9 R5 C6 R7 TD + RD + TD - RD - Tx Vcc SD Rx Vcc R2 R4 No internal connection Notes +3.3V: R1=R3=R5=R7=R9=130 R2=R4=R6=R8=R10=82 C1=C2=C3=C5=C6=0.1F C4=10F L1=L2=1H No internal connection Transceiver Top view R10 R6 R8 L1 Notes +5V: R1=R3=R5=R7=R9=82 R2=R4=R6=R8=R10=130 C1=C2=C3=C5=C6=0.1F C4=10F L1=L2=1H Vcc C3 C1 L2 C4 C2 Rx Vcc Tx Vcc The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc. A GND plane under the module is required for good EMI and sensitivity performance. LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 5 LUMNDS813-Jul0706 Rev A.2 155 Mbps DFB Laser Single Mode Transceiver (Ultra-LR) C-15-155-TDFB(3)-SXX10(12) SC Transceiver Assembly 10.4mm Top View Front View Side View Rear View Units: mm Package Option: Blank = Black case LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 6 LUMNDS813-Jul0706 Rev A.2 155 Mbps DFB Laser Single Mode Transceiver (Ultra-LR) C-15-155-TDFB(3)-SXX10(12) SC Transceiver Assembly 9.8mm Front View Top View Units: mm x8 Rear View Side View Package Option: D = Black case E = Blue case LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 7 LUMNDS813-Jul0706 Rev A.2 155 Mbps DFB Laser Single Mode Transceiver (Ultra-LR) C-15-155-TDFB(3)-SXX10(12) FC Transceiver Assembly Top View Front View Rear View Side View LUMINENTOIC.COM Units: mm 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 8 LUMNDS813-Jul0706 Rev A.2 155 Mbps DFB Laser Single Mode Transceiver (Ultra-LR) C-15-155-TDFB(3)-SXX10(12) ST Transceiver Assembly y LUMINENTOIC.COM Top View Front View Side View Rear View 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 9 Units: mm LUMNDS813-Jul0706 Rev A.2 155 Mbps DFB Laser Single Mode Transceiver (Ultra-LR) C-15-155-TDFB(3)-SXX10(12) Ordering Information Available Options: C-15-155-TDFB3-SSC(FC/ST)10 C-15-155-TDFB-SSC(FC/ST)10 C-15-155-TDFB3-SSC(FC/ST)12 C-15-155-TDFB-SSC(FC/ST)12 C-15-155-TDFB3-SSC10D C-15-155-TDFB-SSC10D C-15-155-TDFB3-SSC12D C-15-155-TDFB-SSC12D C-15-155-TDFB3-SSC10E C-15-155-TDFB-SSC10E C-15-155-TDFB3-SSC12E C-15-155-TDFB-SSC12E C-15-155-TDFB3-SSC(FC/ST)10-G5 C-15-155-TDFB-SSC(FC/ST)10-G5 C-15-155-TDFB3-SSC(FC/ST)12-G5 C-15-155-TDFB-SSC(FC/ST)12-G5 C-15-155-TDFB3-SSC10D-G5 C-15-155-TDFB-SSC10D-G5 C-15-155-TDFB3-SSC12D-G5 C-15-155-TDFB-SSC12D-G5 C-15-155-TDFB3-SSC10E-G5 C-15-155-TDFB-SSC10E-G5 C-15-155-TDFB3-SSC12E-G5 C-15-155-TDFB-SSC12E-G5 Part numbering Definition: C - 15 - 155 - TDFB(3) - S XX Tx Power Temperature and Package -RoHS • Wavelength Tx Wavelength=1550nm • Communication protocol (155 Mbps) • TDFB = +5V Transceiver, DFB TDFB3 = +3.3V Transceiver, DFB • Single mode fiber • Connector options SC/ST/FC • Tx Power range 10 = -3 to +3 dBm 12 = 0 to +5 dBm • Temperature range and packahge Blank = commercial temperature (0 to 70oC), 10.4 mm, Black case D = commercial temperature (0 to 70oC), 9.8 mm, Black case E = commercial temperature (0 to 70oC), 9.8 mm, Blue case • RoHS compliance options Blank = RoHS non-compliant product G5 = RoHS 5/6-compliant product (lead exemption) LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 10 LUMNDS813-Jul0706 Rev A.2 155 Mbps DFB Laser Single Mode Transceiver (Ultra-LR) C-15-155-TDFB(3)-SXX10(12) Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notice IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at LuminentOIC’s sole and absolute discretion. LuminentOIC warrants performance of its products to current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated as “preliminary” are given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company’s Terms and Conditions of Sale for further warranty information. LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and LuminentOIC makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that LuminentOIC is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. © LuminentOIC, Inc. 2003 All rights reserved LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 11 LUMNDS813-Jul0706 Rev A.2